Corso di laurea
Master in Industrial Mechanical Engineering
Libera Università di BOLZANO · 23 materie · 0 file condivisi
Sfoglia il materiale didattico
Con UniDocs hai l'opportunità di studiare insieme a tutto il tuo corso di laurea. Guadagna subito dei crediti, carica il materiale del tuo ultimo esame!
Più condividi, più tempo avrai per studiare con tutta la community!
Materie del corso
Intended Learning Outcomes (ILO) Module 1 - Advanced Manufacturing Technologies and Systems Knowledge and understanding: 1. This module provides bases and opportunities to originally develop and/or apply knowledge and…
Scheda dell'insegnamento
Obiettivi formativi
Intended Learning Outcomes (ILO)
Module 1 - Advanced Manufacturing Technologies and Systems
Knowledge and understanding:
1. This module provides bases and opportunities to originally develop and/or apply knowledge and ideas both in a manufacturing and in a research context.
Applying knowledge and understanding:
2. Knowledge provided by the lessons will be applied in the development of a project connected to the studied technologies.
Making judgements:
3. This module provides the ability to integrate knowledge and handle complexity, and to formulate global judgements as well as specific technologic analysis, evaluating the most suitable production cycle also for complex parts by using advanced technologies.
Communication skills:
4. This module provides the ability for the students to work in a group and communicate these conclusions both to specialist and non-specialist audiences.
Ability to learn:
5. All the arguments are presented and discussed during the lectures. The study is autonomous, and the students will have the possibility to discuss the achieved knowledge in the development of team course project.
Module 2 - Reverse Engineering and Rapid Prototyping
Knowledge and understanding:
6. Students will:
i. acquire basic knowledge about the main objectives pursued by Reverse Engineering and Rapid Prototyping tools, with a particular focus on their use to design and develop new engineering products;
ii. understand the main differences, pros and cons of the alternative technologies to carry out design tasks supported by 3D-printing devices targeting Rapid Prototyping
iii. acquire knowledge about Additive Manufacturing processes;
iv. be able to identify the advantages and limitations of Reverse Engineering and Additive Manufacturing processes in the overall context of design, manufacturing and industrial engineering.
Applying knowledge and understanding:
7. Students will have the chance to apply their knowledge to master processes involving Reverse Engineering, Rapid Prototyping and modelling techniques with a hands-on approach.
Making judgments:
8. Students will be able to compare the existing tools that have been developed for 3D scanning and Rapid Prototyping. They will develop critical capabilities about the pros and cons regarding said instruments. In addition, they will be able to explain alternative strategies for achieving the results obtained through Reverse Engineering and Rapid Prototyping within engineering design.
Communication skills
9. Students will have the ability to properly discuss the fundamentals of Reverse Engineering and Rapid Prototyping.
Ability to learn:
10. Students will be encouraged to consult the literature and the web to keep themselves updated, because of the rapid evolution of the treated technologies, especially Additive Manufacturing
11. Students will be able to combine the knowledge acquired during the course with respect to the theoretical background of the teaching, the experience gathered by means of lab tests and notions about trends in the field, gained through the literature in the domain. Students will have the opportunity to extend the knowledge of the topics of the course by consulting scientific literature, specialized texts, practitioners’ materials or websites that the lecturer will suggest during the course.
Programma
The course is part of characterizing activities for engineering studies, and it is part of the curriculum of study of the Master in Industrial Engineering. The combination of theoretical findings and practical activities enables both the strengthening of students’ scientific background and the acquisition of valuable professional skills.
Module 1 aims to furnish a general overview of the most important advanced technologies and manufacturing systems. At the end of the course, the student will be able to face a manufacturing problem deciding how to process and manage a product and choosing the suitable manufacturing technology (in particular with a focus on some specific advanced technologies such as Additive Manufacturing or Laser). Also, the students will perform a simulation of an additive manufacturing process.
Module 2 addresses the fundamentals of methods and techniques to support engineering design processes, by focusing on the opportunities provided by Reverse Engineering and Rapid Prototyping. Students will achieve first a global understanding of product development processes. Then, the course will clarify the design phases and the circumstances in which Reverse Engineering and Rapid Prototyping are the most advantageous. Within the contents, a discussion about alternative technologies, which will be outlined as well, will be introduced. Students will have the opportunity to experience available tools in a lab setting.
Module 1 – Advanced Manufacturing Technologies and Systems
- Introduction
- Advanced Manufacturing Technologies
a. Advanced Machining Processes
b. Advanced Forming and Material Processing Technologies
c. Advanced Joining and Coating Processes - Advanced Manufacturing Systems
a. Manufacturing Systems and Industry 4.0
b. Modern Manufacturing Equipment and Machine Technology
c. Digital Process Planning and Manufacturing Simulation
Module 2 – Reverse Engineering and Rapid Prototyping
- Contact and non-contact Reverse Engineering
- Rapid Prototyping and Additive Manufacturing
a. Stereolithography
b. Fused Deposition Modelling
c. Powder Bed Fusion
d. Other Additive Manufacturing processes
[Module A] Module 2 – Reverse Engineering and Rapid Prototyping
- Contact and non-contact Reverse Engineering
- Rapid Prototyping and Additive Manufacturing
a. Stereolithography
b. Fused Deposition Modelling
c. Powder Bed Fusion
d. Other Additive Manufacturing processes
[Module B] Module 1 – Advanced Manufacturing Technologies and Systems
- Introduction
- Advanced Manufacturing Technologies
a. Advanced Machining Processes
b. Advanced Forming and Material Processing Technologies
c. Advanced Joining and Coating Processes - Advanced Manufacturing Systems
a. Manufacturing Systems and Industry 4.0
b. Modern Manufacturing Equipment and Machine Technology
c. Digital Process Planning and Manufacturing Simulation
Modalità d'esame
Module 1: - group project work: report and presentation: 30 minutes per group; ILOs assessed:
2, 4, 5; written exam: max. 2 hours; ILOS assessed: 1, 3.
Module 2: - Written exam: max. 4 hours; ILOs assessed: 6, 8, 9.
Formative assessment:
The group exercises in the classroom and in the laboratory through experiential learning, conversations with the lecturer and the performance in specific tasks would enable the assessment and evaluation of the students’ ability to apply their knowledge and understanding of the topics (7.) covered during the course, as well as their achieved communication skills (9.).
Summative assessment:
The final exam is a written test, which mainly assesses the knowledge and understanding of the topics of the course (6.).
Specific questions and exercises are tailored to assess students’ capabilities to make judgements and selections (8.), and their understanding of the objectives of the practical activities (7.). To this respect, details are found in “Evaluation criteria” below. The ILO (10) will not be assessed.
Module 1
Written exam (50%), written report and oral
project presentation (50%)
- Relevant for written exam: clarity of answers, ability to
summarize, evaluate, and establish relationships between topics,
use of drawing and scheme of the
processes; - Relevant for project: ability to work in a team, creativity, skills
in critical thinking, ability to identify new solutions using the
described technologies.
Module 2
The evaluation criteria of the exam are tailored to test the
knowledge of the topics of the course, the clarity of the answers
and the appropriateness of the language of the student, the
pertinence and the relevance of the response and the autonomy of
judgment, as well the capability of critically selecting alternatives
for supporting engineering design processes.
Specific questions will aim to assess the ability of the student to
present, communicate and discuss the design objectives favored by
Reverse Engineering and Rapid Prototyping techniques. Other
questions will verify the student’s comprehension of the main
issues emerged during practical activities, for instance the
motivations behind the need to perform auxiliary functions to the
scope of successful 3D scanning and printing operations. Additional
exercises could be oriented to the evaluation of the judgement
skills by proposing potential industrial problems and asking for the
most appropriate technologies that might aid in the overcoming of
said problems.
In the written test, the maximum number of points achievable by
positively completing each exercise and answering each question
will be clearly indicated. Points might be subtracted if the quality of
the language will be considered unsatisfactory, with specific
reference to the terms characterizing the teaching.
Please note that the final mark for the course “Design and Manufacturing of Industrial Products” will be the average of the marks achieved in the modules “Advanced Manufacturing Technologies and Systems” (here indicated as Module 1) and “Reverse Engineering and Rapid Prototyping” (here indicated as Module 2) .
Assessment language: English
Testi di riferimento
Slides of the course.
- The course material is mainly collected from research papers and web notes
[Module A] Slides of the course. The course material is mainly collected from research papers and web notes
[Module B] Slides of the course. The course material is mainly collected from research papers and web notes.
Module 1 Boothroyd G, Dewhurst P, Knight WA, Production Design for Manufacture and Assembly, Taylor & Francis Group. Hassan E, Advanced Machining Process, McGraw Hill
Module 2 Gibson I, Rosen D, Stucker B, Khorasani M, “Additive Manufacturing Technologies”, Springer. Raja, Vinesh, Fernandes, Kiran J. (Eds.),”Reverse Engineering: an Industrial Perspective”, Springer Additional textbooks, lecture notes, and research papers might be suggested by the lecturer during the course to enable student’s autonomous study of pertinent topics. Some research papers that have been extensively used to extract contents and materials will be clearly indicated. They can be consulted as alternative sources and to deepen knowledge
[Module A] Gibson I, Rosen D, Stucker B, Khorasani M, “Additive Manufacturing Technologies”, Springer.
Raja, Vinesh, Fernandes, Kiran J. (Eds.), ”Reverse Engineering: an Industrial Perspective”, Springer
Additional textbooks, lecture notes, and research papers might be suggested by the lecturer during the course to enable student’s autonomous study of pertinent topics. Some research papers that have been extensively used to extract contents and materials will be clearly indicated. They can be consulted as alternative sources and to deepen knowledge.
[Module B] Boothroyd G, Dewhurst P, Knight WA, Production Design for Manufacture and Assembly, Taylor & Francis Group. Hassan E, Advanced Machining Process, McGraw Hill
Codice insegnamento unibz:30747
Learning outcomes (ILO): 1. Knowledge and understanding: Students should know the theoretical background of diverse composite materials from materials, processing, calculation, and design perspective 2. Applying…
Scheda dell'insegnamento
Obiettivi formativi
Learning outcomes (ILO):
1. Knowledge and understanding:
Students should know the theoretical background of diverse composite materials from materials, processing, calculation, and design perspective
2. Applying Knowledge and understanding:
Students should be able to discern the different properties and production methods of the basic material classes from those of composite materials. They should be able to select and use basic calculation methods to determine composite behaviour from data of the constituent materials.
3. Making judgments:
Students should be able to critically decide when to employ composite materials in component/product design, how to experimentally assess their properties and how to use failure cases analyses as a means to improve designs.
4. Communication skills:
Students should be able to present results of the exercises and contributions to discussions/own talks in appropriate technical/scientific language.
5. Learning skills
Students should be able to autonomously search and critically appraise technically relevant data, publications and case studies.
Programma
Achieving an understanding of composite materials as an important technical means beyond structural applications; to be able to select material combinations based on the external load acting on the object; to get acquainted with different approaches to composite material design with an additional perspective on nature and biological inspired approaches; to gain knowledge on how to characterize composite materials and to assess their failure in operation to derive design optimizations.
1• General introduction to composites and their history
- Materials and Technical applications
- Production and processing technologies
- Behaviour of composites: lab v. operational conditions
- Design and construction
- Destructive and non-destructive characterization and failure assessments
- Recycling and sustainability considerations
Modalità d'esame
- Formative assessment:
In-classe exercises: 9x120 minutes; ILOs assessed: 1, 2, 3, 4, 5. - Summative assessment:
100% written exam: 2 hours; ILOs assessed: 1, 2, 3, 4.
Performance in written exam.
Testi di riferimento
T.W. Clyne et al., “An Introduction to Composite Materials”, Cambridge University Press, 3rd ed., 2019, ISBN 978-0-521-86095-6
K.K. Chawla, “Composite Materials – Science and Engineering”, Springer, 4th ed., 2019, ISBN 978-3-030-28982-9
M.F. Ashby, “Materials Selection in Mechanical Design”, Butterworth-Heinemann, 5th ed., 2017, ISBN 978-0-08-100599-6
J. Rösler et al., “Mechanisches Verhalten der Werkstoffe”, Vieweg+Teubner, 3rd ed., 2008, 978-3-8351-0240-8
M.F. Ashby, “Materials and the Environment – Eco-informed Material Choice”, Butterworth-Heinemann, 3rd ed., 2021, ISBN 978-0-12-821521-0
C. Mattheck, “Design in Nature – Learning from Trees”, Springer, 1st ed., 1998, ISBN 978-3-642-58747-4
Codice insegnamento unibz:30762
Knowledge and understanding: The students will be able to master basic and advanced concepts of industrial maintenance and reliability theory. They will gain an understanding of the concepts related to the modeling of…
Scheda dell'insegnamento
Obiettivi formativi
Knowledge and understanding:
The students will be able to master basic and advanced concepts of industrial maintenance and reliability theory. They will gain an understanding of the concepts related to the modeling of reliability for both simple and complex systems, the application of reliability theory to the functional safety of machinery, methodologies for reliability design and evaluation, and strategies for maintenance management.
Applying knowledge and understanding:
The students will be able to analyze and discuss the reliability of complex industrial systems. Furthermore, they will apply the acquired theoretical concepts using tools and methodologies for designing and assessing reliable and safe production systems.
Making judgments:
According to specific conditions, students will be able to critically evaluate the appropriateness of various approaches and tools related to advanced maintenance principles, reliability of complex systems, methodologies for reliability design and evaluation, functional safety applied to industrial machinery, and predictive maintenance.
Communication skills:
Students will be able to use technical vocabulary related to the covered topics. Furthermore, they will be able to structure, prepare, and present scientific and technical documentation describing project activities and discuss them with decision-makers.
Learning skills:
Students will be able to autonomously expand their knowledge acquired during the course through reading and understanding scientific and technical documentation (including that provided by lecturers). Similarly, they will be able to expand their skills in using methodologies and tools for reliable systems design and maintenance management, investigating the use of cross-cutting or specific approaches to solve problems similar to those covered in the course.
Programma
The course offers both basic and advanced knowledge on the maintenance and reliability of complex industrial systems, with a particular focus on production systems. The topics will be covered through a mix of theoretical classes, numerical exercises, and case study discussions. Key areas include the design and management of maintenance for industrial systems, modeling complex systems reliability, functional safety of machinery, methodologies for reliability design and evaluation.
- Maintenance of industrial systems: basic concepts, objectives, failure classification and causes, maintenance strategies;
- Modeling complex systems reliability: reliability functions, blocks diagrams, maintenance and system engineering, failure rate profiles, serial/parallel/k-out-of-n configurations;
- Predictive maintenance: basic concepts, condition monitoring, system architecture and data, decision trees for failure classification;
- Functional safety of machinery: safety and reliability in machinery control systems, functional safety of machinery, design of Safety Related Parts of Control Systems;
- Methodologies for reliability design and evaluation: Failure Mode Effects (and Criticality) Analysis, Fault Tree Analysis;
Modalità d'esame
Evaluation will be by written examination supplemented by a report developed and discussed by the student.
The written part will consist of answering theoretical questions and/or completing exercises on the topics covered in the course.
The report will be related to a individual work assigned by the lecturer to deepen a specific topic or methodology discussed during the course.
The parts of the final exam are following summarized:
Written part (answering theoretical questions and/or completing exercises): 2 hours; Contribution to final grade: 80%;
Individual report and discussion: To be carried out in the classroom and/or independently; Contribution to final grade: 20%.
Criteria for evaluation of the written examination: correctness and completeness of answers.
Criteria for evaluation of the individual work: correctness and completeness of the results and analyses provided in the report, as well as quality of the discussion and completeness of the answers to potential specific questions.
Testi di riferimento
References to textbooks, lecture notes, research papers, and readings may be provided by the lecturers.
Rausand, M. (2014). Reliability of safety-critical systems: theory and applications. John Wiley & Sons.
Manzini, R., Regattieri, A., Pham, H., & Ferrari, E. (2010). Maintenance for industrial systems (pp. 409-432). London: Springer.
Codice insegnamento unibz:30757
Students will be able to: Knowledge and understanding Explain the concepts of digitization, digitalization and digital transformation Describe the main digital technologies and their impact on business processes,…
Scheda dell'insegnamento
Obiettivi formativi
Students will be able to:
Knowledge and understanding
- Explain the concepts of digitization, digitalization and digital transformation
- Describe the main digital technologies and their impact on business processes, business models and organizations
- Explain sustainability management principles, sustainability certifications and sustainable business practices
- Describe sustainability reporting frameworks, carbon footprint analysis and life cycle assessment approaches
Applying knowledge and understanding
- Analyze opportunities for digital transformation in manufacturing, supply chain and customer-related processes
- Design sustainability KPI systems and performance dashboards
- Apply carbon footprint and life cycle thinking to products and organizational contexts
Making judgements
- Critically evaluate the benefits, limitations and trade-offs associated with digital transformation initiatives
- Evaluate alternative digital investment options using economic, operational and sustainability criteria
- Use appropriate methods and tools to support sustainability and digital transformation decisions
- Define appropriate system boundaries, assumptions and data requirements for sustainability assessments
Communication skills
- Present and discuss digital transformation and sustainability challenges using appropriate terminology
- Communicate assessment results and recommendations to technical and managerial audiences
- Support decisions through the use of quantitative and qualitative evidence
Learning skills
- Autonomously extend the knowledge and problem-solving skills acquired during the study course to complex organizational challenges
Programma
The course provides insights into the developments in digital transformation and sustainability that are reshaping manufacturing and logistics systems.
First, students will be introduced to a managerial perspective to understand how digital technologies enable process innovation, new business models and new approaches to value creation, while generating new organizational challenges and requirements. Methods for evaluating alternative digital technology investment decisions will also be discussed.
Second, they will be introduced to key sustainability management concepts, including sustainability certifications, sustainable business models and practices, reporting frameworks and sustainability measurement approaches such as carbon footprint analysis and life cycle thinking.
Overall, the acquired knowledge will enable industrial and mechanical engineers to analyze, evaluate and influence the technological, organizational and sustainability-related developments affecting modern manufacturing and logistics systems.
Digital Transformation:
- Digital transformation concepts and enabling technologies
- Digitalization of business processes
- Digital transformation of business models
- Organizational implications of digital transformation
- Digital investments evaluation and decision-making
Sustainability management: - Sustainability management principles
- Sustainability certifications and standards
- Circular and sustainable business models
- Sustainability reporting and ESG performance measurement
- Carbon footprint analysis and life cycle assessment
Modalità d'esame
Written exam and case study assignments.
The mark is calculated from the results of the written exam and the case study assignments. The written exam counts 70% and the assignments count 30% of the final grade.
The written exam is assessed considering:
- correctness and completeness of the answers
- ability to apply course concepts and methods to simple problems and exercises
- ability to analyse and establish relationships among different topics
- clarity and appropriate use of terminology
The assignments are assessed considering:
- consistency with the assignment requirements and quality of the analysis
- appropriate application of course concepts and methods
- ability to justify choices and effectively present the results
Testi di riferimento
Lecture notes and documents for exercises will be available on the Microsoft Teams and/or the Open Learning Environment (OLE) pages of the course.
Codice insegnamento unibz:30748
Knowledge and Understanding: Fundamentals of mechanical vibrations and dynamic system behavior Free and forced vibration of single and multiple degree-of-freedom systems Fundamentals of numerical and experimental…
Scheda dell'insegnamento
Obiettivi formativi
Knowledge and Understanding:
- Fundamentals of mechanical vibrations and dynamic system behavior
- Free and forced vibration of single and multiple degree-of-freedom systems
- Fundamentals of numerical and experimental vibration analysis
Applying Knowledge and Understanding:
- Analysis and evaluation of the dynamic behavior of mechanical systems
- Application of analytical, numerical and experimental methods for vibration analysis
Making Judgements:
- Selection of appropriate analytical, numerical and experimental methods
- Interpretation and assessment of numerical and experimental results
Communication Skills:
- Analysis and discussion of technical documentation
- Discussion of technical problems and solution concepts
Learning Skills:
- Independent deepening of course content through the use of scientific and technical literature
- Familiarization with advanced methods in vibration analysis
Programma
- Introduction and fundamentals of mechanical vibrations
- Free and forced vibration of single degree-of-freedom systems
- Free and forced vibration of multiple degree-of-freedom systems
- Numerical and experimental methods in vibration analysis
The course provides a comprehensive introduction to the theory and analysis of mechanical vibrations. It begins with the fundamental concepts of kinematics, dynamics and the modeling of vibrating mechanical systems. The free and forced vibration response of single degree-of-freedom systems is studied in detail, including undamped and damped vibration, resonance, harmonic excitation, vibration isolation and the formulation of equations of motion using energy-based methods. The course then extends these concepts to multiple degree-of-freedom systems, covering free and forced vibration, modal analysis and an introduction to the dynamic behavior of continuous systems. In addition, numerical methods for vibration analysis are introduced and applied to practical engineering problems. The course concludes with an overview of experimental vibration analysis, including measurement techniques and experimental modal analysis for the identification and characterization of dynamic system properties.
Modalità d'esame
The assessment is based on a written examination consisting of numerical exercises accounting for 60 % of the final grade and theoretical questions accounting for 40 %.
The assessment criteria for the numerical exercises are the correctness of the solution procedure and the results. The assessment criteria for the theoretical questions are based on knowledge of the course topics, the clarity and relevance of the answers, command of the language of instruction, and the ability to exercise independent judgment.
The weighting of each numerical exercise and theoretical question is specified in the written examination.
Testi di riferimento
Notes taken during lecture
Lecture slides
S. G. Kelly. Mechanical vibrations: Theory and applications. San Diego: Cognella, 2022
T. L. Schmitz and K. S. Smith. Mechanical vibrations: Modeling and measurement. Cham: Springer, 2021. https://doi.org/10.1007/978-3-030-52344-2
Codice insegnamento unibz:30758
Intended Learning Outcomes (ILO) By the end of the course, students should be able to: Knowledge and understanding: 1. Know the theoretical bases of the Finite Element Method for the solution of structural problems…
Scheda dell'insegnamento
Obiettivi formativi
Intended Learning Outcomes (ILO)
By the end of the course, students should be able to:
Knowledge and understanding:
1. Know the theoretical bases of the Finite Element Method for the solution of structural problems
Applying knowledge and understanding:
Know how to apply FEA to practical design cases in the field of stress analysis for machine design.
Making judgements:
3. Critically analyze the results of FEA simulation, discuss their accuracy, on the basis of the mesh and elements properties
4. Define a FEM model with a tradeoff between the accuracy and the computational effort
Communication skills:
5. Prepare a technical report describing the design application, expose and discuss it at the oral exam
Ability to learn:
6. Ability to autonomously extend the knowledge acquired.
Programma
The course introduces the theoretical background of the Finite Element Method in order to promote a critical and aware approach to its application in in machine design. It also provides exposure practical design cases to encourage understanding of the broader implications of design.
The course introduces the finite element method (FEM) for the analysis of solid structural problems. The background of the finite element method and its solution procedures for linear analysis will be provided and the different type of elements will be introduced.
- Introduction to FEM: the method of displacements applied to FEM
- Formal Procedure For FEM: discretization, Shape functions, displacement, strain, stress, stiffness matrix, solution, recovery of results.
- Bar, Simple Beam, 2D and 3D Beam Element. Property and limitations of beam elements
- Plane Elements, Plane stress and plane strain, linear and quadratic triangular and quadrilateral elements. Properties and limitations of plane elements
- Isoperimetric elements. Properties, limitations
- Solid Elements, linear and quadratic test and hex elements. Solid of Revolution. Properties, limitations.
- Theory of Plates and Shells. Finite elements for plates and shells
- Theory of composite laminate materials. Orthotropy. Finite elements for orthotropic laminated composite materials Nonlinear analyses, contact analysis, large deformation analysis, modal analysis and structural instability analysis will also be addressed.
Modalità d'esame
- Formative assessment:
In class exercises: 9x120 minutes; ILOs assessed: 2, 3, 4; - Summative assessment:
50% written exam questions; ILOs assessed: 1, 2.
50% report and oral discussion, weighted as follows: Quality of the technical report (30%), correctness of the results (20%) Oral discussion (50%); ILOs assessed: 3,4, 5, 6.
The final mark will be obtained combining the evaluations of the written test and of the oral examination.
Testi di riferimento
Lecture notes and documents for exercise will be available on OLE.
Olek C Zienkiewicz, Robert L Taylor, J.Z. Zhu, The Finite Element Method: Its Basis and Fundamentals, Seventh Edition (ENG)
Robert D. Cook, Finite Element modeling for stress analysis, L Wiley & Sons, 1995 (ENG)
Codice insegnamento unibz:30752
1. Knowledge and Understanding: Understand the kinematic and dynamic properties of mechanism for the transmission of motion; Understand the properties of the most common trajectories and their influence on the machine…
Scheda dell'insegnamento
Obiettivi formativi
1. Knowledge and Understanding:
- Understand the kinematic and dynamic properties of mechanism for the transmission of motion;
- Understand the properties of the most common trajectories and their influence on the machine dynamics
2. Applying knowledge and understanding:
- Evaluate and select the proper transmission system considering mechanical and energy efficiency;
- Identify the main components of transmission systems and sources of inefficiency
3. Making judgments:
- Select and design an effective motion law under different working conditions and targets;
- Choose suitable combination of mechanical and electric components for energy transformation and transfer
4. Communication skills:
- Ability to structure and prepare scientific and technical documentation
5. Learning skills:
- Ability to independently build upon the knowledge acquired during the study course by reading and understanding scientific and technical documentation.
Programma
The course aims at giving the guidelines for the functional design of automatic machines, in particular taking into account mechanical efficiency. Criteria and methods to analyze and choose mechanical devices, design motion laws and to evaluate the best system to minimize the energy dissipation in electromechanical systems will be addressed.
- Comparison of mechanisms
- Energy efficiency
- Mechanical transmissions
- Electric motors
- Selection of components (electric motor and transmission)
- Trajectory planning
- Energy storage systems and energy recovery
Modalità d'esame
- Formative assessment:
In-class exercises: continuosly in exercise courses; Learning outcomes assessed: 1, 2, 3, 4, 5; - Summative assessment:
Written exam: 3 hours; Learning outcomes assessed: 1, 2, 3, 4, 5.
The written examination will include both theoretical questions and numerical exercises to show ability to solve problems handled in this course.
Written examination:
Theoretical knowledge (35%)
Correctness of methods (30%)
Correctness in solution (30%)
Appropriate use of units (5%).
Testi di riferimento
Slides provided to the students after each lecture and notes taken by students during lecture.
A collection of suggested readings from various sources will be announced during the course. Such sources will be papers, manuals, technical notes, and excerpts from textbooks, including
Biagiotti, Luigi, and Claudio Melchiorri. Trajectory planning for automatic machines and robots. Springer Science & Business Media, 2008.
Norton, Robert L. Kinematics and dynamics of machinery. McGraw Hill Higher Education, 2009.
Filizadeh, S. Electric Machines and Drives: Principles, control, modelling and simulation. CRC Press, 2013.
Codice insegnamento unibz:30760
Knowledge and understanding: Module 1: The students will know the most important concepts of modelling, planning and control of industrial robotic systems and gain essential knowledge of robot components. Module 2: The…
Scheda dell'insegnamento
Obiettivi formativi
Knowledge and understanding:
Module 1: The students will know the most important
concepts of modelling, planning and control of industrial robotic systems and gain essential knowledge of robot components.
Module 2: The student knows the basics and advanced features of simulation modelling and analysis as well as the current methods and tools for digitalization in manufacturing.
Applying knowledge and understanding:
The student applies and practices theoretical contents through exercises, case studies and project work. Theory contents are practiced through exercises using practical examples.
From Module 1, the students will know how to treat a
robotic system form a kinematic (position and speed) and static point of view as well as how to set-up a robotic simulator and motion control program.
In Module 2 the students develop independently a simulation model for given case studies out from the production and logistics environment. In a second lab they practice IIoT and handling data with IoT platforms. Presentation techniques are trained using equipment such as flipcharts and power point presentations.
Making judgements:
Module 1: The student will be able to make judgments
selecting a suitable robotic system for a practical
industrial solution.
Module 2: The student judges the use of appropriate methods, models and systems for simulation and Industrial IoT. Students can judge and interpret simulation results and data extracted from production and to use them for derivate measures for optimization.
Communication skills:
- Ability to present the acquired knowledge and competences with a proper language
- Ability to express concepts with the field related technical terminology
Learning skills:
The students learn both by frontal teaching (theory part) as well as by exercises in the classroom and in the Smart Mini Factory lab (practical exercises). The students will be able to enlarge their knowledge through self-study and consultation of scientific and technical documentation.
Programma
The course belongs to the class of characterizing courses
in the Master in Industrial Mechanical Engineering. It aims
at teaching both scientific foundations and practical
methods and helps to develop specific professional skills
in the domains of industrial robotics and digital
manufacturing.
Students will learn, in Module 1 “Industrial
Robotics”, fundamental concepts and methodologies for
understanding and modelling industrial robots and their core components, i.e. essential knowledge and skills for developing models as well as for kinematics and dynamics evaluation and control; then, they will acquire fundamental knowledge and competences on how to simulate and program industrial robots by means of exercises and practical activities.
Module 2 “Digital Manufacturing and Simulation” provides the basics in cyber-physical production systems, data- driven production, industrial internet of things, digital twin technology and simulation methodologies. Theoretical foundations will focus on the design, planning and implementation of connected machines and resources in production as well as the fundamentals of simulation for production and logistics. In addition to theoretical models and methods the practical use of cyber-physical systems as well as specific simulation software in the production environment is treated by means of exercises and practical case studies.
Smart Mini Factory lab will serve as laboratory for both
the modules.
Module 1 - Industrial Robotics
- Introduction to robotics
- Components of robots
- Direct kinematics
- Kinematic calibration
- Inverse kinematics
- Differential kinematics and statics
- Trajectory planning
- Robot dynamics and control (hints)
- Examples of programming of industrial robotic systems
Module 2 - Digital Manufacturing and Simulation
Part 1) SIMULATION
- Fundamentals of simulation modelling
- Principles, methods and procedures for implementing simulation studies
- Fields of application for simulation
- Software tools for simulation
Part 2) DIGITAL MANUFACTURING
- Introduction to data-driven production
- Industrial Internet of Things
- Data Analytics and retrofitting of legacy systems
- Work 4.0 and digital worker assistance systems
- Digital twins in manufacturing
- Manufacturing cybersecurity
Simulation Lab:
- Introduction to FlexSim
- Data analysis and distributions
- Case study modelling (production plant and/or logistics systems modelling and simulation)
[Module A] Module 1 - Industrial Robotics
- Introduction to robotics
- Components of robots
- Direct kinematics
- Kinematic calibration
- Inverse kinematics
- Differential kinematics and statics
- Trajectory planning
- Robot dynamics and control (hints)
- Examples of programming of industrial robotic systems
[Module B] Module 2 - Digital Manufacturing and Simulation
Part 1) SIMULATION
- Fundamentals of simulation modelling
- Principles, methods and procedures for implementing simulation studies
- Fields of application for simulation
- Software tools for simulation
Part 2) DIGITAL MANUFACTURING
- Introduction to data-driven production
- Industrial Internet of Things
- Data Analytics and retrofitting of legacy systems
- Work 4.0 and digital worker assistance systems
- Digital twins in manufacturing
- Manufacturing cybersecurity
Simulation Lab:
- Introduction to FlexSim
- Data analysis and distributions
- Case study modelling (production plant and/or logistics systems modelling and simulation)
Modalità d'esame
Assessment Module 1:
Knowledge and understanding: written exam/reports
Applying knowledge and understanding: individual/group work on assignment(s)
Making judgements: individual/group work on assignment(s);
Communication skills: group work on assignment(s), written/oral exam or presentation;
Learning skills: individual/group work on assignment(s), written/oral exam or presentation.
Assessment Module 2:
Knowledge and understanding: written exam
Applying knowledge and understanding: assignments in
lab exercises
Making judgements: assignments in lab exercises
Communication skills: presentation of results of lab
exercises
Learning skills: lab exercises, written/oral exam
Written exam means exam with review questions and
exercises.
Assignments in lab exercises means case study work and
subsequent presentation of the results.
Final single grade by arithmetic average of the grades obtained in Module 1 and Module 2, provided that sufficient grade is achieved in both modules.
Module 1: The grade for this module is calculated as the arithmetic average of the written exam (50%) and the assignment (50%), provided that a sufficient grade is achieved in both parts.
Module 2: The grade for this module is calculated as the arithmetic average of the written exam (50%) and the assignment performed in the Simulation lab (50%), provided that a sufficient grade is achieved in both parts.
Criteria for the evaluation of the written examination:
- completeness and correctness of the answers.
Criteria for the evaluation of the assignment / project work / case
study: - accuracy and completeness, as well as creativity in
structuring of the proposed solution; - quality of the results and quality of presentation.
Testi di riferimento
Lecture notes and documents for exercises will be available on the course platform (e.g. Teams, OLE or reserve collections).
[Module A] Lecture notes and documents for exercises will be available on the course platform (e.g. Teams, OLE or reserve collections).
[Module B] Lecture notes and documents for exercise will be available on the course platform (e.g. Teams, OLE or reserve collections).
Codice insegnamento unibz:35859
Knowledge and Understanding: Advanced understanding of management and business administration Knowledge of the various tasks, methods and approaches of management accounting Knowledge of the management models for…
Scheda dell'insegnamento
Obiettivi formativi
Knowledge and Understanding:
- Advanced understanding of management and business administration
- Knowledge of the various tasks, methods and approaches of management accounting
- Knowledge of the management models for economic and financial management
Applying knowledge and understanding:
- Analysis and solution methods
- Ability to write a business plan
- Ability to do advanced resolutions of management accounting tasks
Making judgements:
- Systems Thinking - overview of the economic and financial organization
- Ability to transfer the knowledge and methods learned to real practical applications
Communication skills:
- Ability to structure, prepare, and present a business plan
Ability to learn:
- Ability to autonomously extend the knowledge acquired during the study course by reading and understanding.
Programma
The course aims to provide students with some key Management Engineering competences.
The learning objectives are in particular to introduce engineering students in the fundamentals management accounting and to teach them how to develop a business plan. Specifically, the course deals with the topics of company costs, management accounting and business planning.
The presented theoretical topics are integrated through targeted application-oriented exercises and cases (including the development of a business plan).
Business Planning
- Introduction
- Business plan structure
- Business plan writing and presentation
Management Control
- Statement of cash flows
- The nature of management accounting
- The behavior of costs
- Full costs and their uses
- Additional aspects of product cost systems
- Standard costs and variable cost systems
- Strategic planning and budgeting
- Management accounting system design
Modalità d'esame
The assessment is based on a written exam (exercises and questions) focused on the management control topic and the presentation of a business plan.
The final mark is the weighted average of the different parts of the exam (the written exam is weighted twice than the business plan presentation).
The assessment of the written part is based on ability to solve simple exercises about the topics of the course, clarity of answers, mastery of language (also with respect to teaching language), ability to summarize and establish relationships between topics.
The assessment of the business plan is based on the level of detail and the correctness of the analyses as well as on the oral presentation (clarity and technical language).
Testi di riferimento
Lecture slides and notes available in the MS Teams group of the course (join code can be found in the Individual Timetable section of MySNS or requested by email to the lecturer).
Antony R.N., Hawkins D.F., Merchant K.A., “Accounting: Text and Cases”, Thirteenth Edition, McGraw-Hill International Edition.
Codice insegnamento unibz:30750
Intended Learning Outcomes (ILO) Knowledge and understanding Students should acquire the knowledge and the understanding of: New product development process and related concepts Essential tools and methods for customer…
Scheda dell'insegnamento
Obiettivi formativi
Intended Learning Outcomes (ILO)
Knowledge and understanding
Students should acquire the knowledge and the understanding of:
- New product development process and related concepts
- Essential tools and methods for customer involvement in new product development
- Tools and approaches for market research in new product development
- Engineering design cycles
- Creative conceptual design
- User Experience in engineering and product design
- Systems to test human-product interaction
Applying knowledge and understanding
- Ability to frame a product development process and its governance structure
- Ability to apply the Quality Function Deployment tool to a simple product
- Ability to properly design a Conjoint Analysis
- Ability to understand the main drivers behind product development and design
- Ability to meditate about concepts instead of rushing to solutions
- Ability to identify the main elements to be tested to allow the appraisal of design ideas and new products
- Ability to organize tests aimed to evaluate people’s experience with new products
Making judgements
- Ability to transfer the knowledge and methods learned to real practical applications thanks to groupworks, exercises and simulation of experimental activities within product development and design
Communication skills
- Ability to prepare, conduct and join interactive discussions in class
- Ability to structure, prepare, and present arguments related to product development and design
Ability to learn
- Ability to autonomously extend the knowledge acquired during the study course by reading and understanding
-
Programma
The course provides insights into the new trends in product development and design.
First, students will be guided in the adoption of a managerial view to understand how to structure an innovation process and how to incorporate the Voice of the Customer (VOC) in new product development decisions. Furthermore, they will learn how to investigate the patterns of consumer decision making through market research, thus better understanding the utility and desirability of new products.
Second, they will be able to understand an engineering view of designing industrial products. Here, students will learn best practices in generation of new product concepts and their subsequent evaluation, which will take place by means of state-of-the-art systems and methods.
Module 1 - Product Development:
- The concept of innovation
- New product development processes and models
- Forecasting techniques for new products
- Quality Function Deployment
- Conjoint Analysis
Module 2 - Engineering and Product Design:
- Engineering design cycles
- Product planning and specifications
- Conceptual design
- Design creativity and assessment thereof
- Human-product interaction
- User Experience
- Eye-tracking in design research
[Module A] Module 1 - Product Development:
- The concept of innovation
- New product development processes and models
- Forecasting techniques for new products
- Quality Function Deployment
- Conjoint Analysis
[Module B] Module 2 - Engineering and Product Design:
- Engineering design cycles
- Product planning and specifications
- Conceptual design
- Design creativity and assessment thereof
- Human-product interaction
- User Experience
- Eye-tracking in design research
Modalità d'esame
Module 1 is assessed through a project-based work, carried out in groups. The assessment includes a short individual oral discussion aimed at verifying the understanding of the concepts and methods covered in the module and the individual contribution to the project.
Module 2 is assessed through a written examination lasting 1.5 hours.
The final grade is calculated as the arithmetic mean of the grades obtained in the two modules, each expressed on a 30-point scale.
The assessment of the project-based work (Module 1) will be based on:
- Quality and coherence of the project and problem framing
- Appropriate and correct application of the methods introduced in the course
- Quality of data analysis, interpretation, and resulting recommendations
- Clarity of the work and individual understanding demonstrated during the oral discussion
The written examination (Module 2) will consider:
- Ability to accurately illustrate concepts about the topics of the course
- Clarity of answers
- Mastery of specialistic terminology
Testi di riferimento
Lecture notes and documents for exercises will be available on the Microsoft Teams of the course.
[Module A] -
[Module B] -
Books and articles will be possibly suggested by the lecturers during the course.
[Module A] -
[Module B] -
Codice insegnamento unibz:34696
Intended Learning Outcomes (ILO) Module 1 - Project Management Knowledge and understanding: 1. The students know the basic and most common methodologies of Project Management (Planning, Scheduling and Monitoring) and the…
Scheda dell'insegnamento
Obiettivi formativi
Intended Learning Outcomes (ILO)
Module 1 - Project Management
Knowledge and understanding:
1. The students know the basic and most common methodologies of Project Management (Planning, Scheduling and Monitoring) and the main used tools.
2. The students are able to understand the issues relating to the development, implementation and management of production and logistics systems;
Applying knowledge and understanding:
3. Students will be able to apply theoretical concepts of planning, organizing and managing projects.
4. By means of exercises performed in the computer laboratory, the student will be able to use software tools like Microsoft Project, which is one of the most used tools of local companies.
Making judgements
5. The students are able to interpret Key Performance Indicators of project management to understand if projects are over, under or on budget and time.
Communication skills:
6. Ability to structure and prepare a presentation describing project management concepts with business language
Ability to learn:
7. Ability to autonomously extend the knowledge acquired during the study course in different industrial contexts
Module 2 - Process and Technology Management
Knowledge and understanding:
8. The students will understand the issues related to the process identification, modelling and redesign and will know the basic and most common methods used in process management
9. The students will know various methods used for the technology management and foresight
10. The students will understand how firms can rely on external collaboration to innovate
Applying knowledge and understanding:
11. Students will be able to apply theoretical concepts of process management and to use BPMN tools for the process description and modelling
12. Students will learn how to apply theoretical models of technology foresight and to implement complex technology foresight methods like T-start and scenario planning
Making judgments:
13. Students will be able to transfer the knowledge and methods learned to real practical applications
14. Students will be able to describe processes in a way that allows to find their criticalities and to redesign them
15. Students will be able to recognize consciously the technological positioning of a company and to find options for its development and improvement, using technology foresight
Communication skills:
16. Students will be able to present process analyses and technology roadmaps
17. Students will be able to interact in a competent and professional way in complex, multi-participants workshops like the ones used in T-plan and scenario planning methods
Ability to learn:
18. Students will be able to autonomously extend the knowledge acquired during the study course by reading and understanding.
Programma
The course is one of the basics of the scientific area of Industrial Engineering.
The course gives a general overview of the main scientific contents. During the course, the presented theoretical topics will be integrated through targeted application-oriented exercises and through a real game-based business simulation.
The learning objectives of module 1 are to introduce engineering students in the fundamentals of project management. Specifically, it will deal with the subjects of project planning, project scheduling and project monitoring.
The learning objectives of module 2 are to introduce students to the fundamentals of process and technology management. In particular, the part that concerns the process management will deal with process identification, modelling and redesign and the part that concerns the technology management will deal with technology foresight and related methods.
Module 1 - Project Management
- Introduction to Project Management
- Project planning
- Project scheduling methods
- Project progress measurement and forecast
- Project risk management
- Construction Project Management
- Exercises
Module 2 - Process and Technology Management - Process identification and description
- Process modelling (Business Process Model and Notation - BPMN) and process discovery
- Process analysis and redesign
- Technology management activities: acquisition, exploitation, identification, protection, selection
- Technology management tools: portfolio management, patent analysis, value analysis, stage-gate, S-curve, technology roadmapping
[Module A] Module 1 - Project Management
- Introduction to Project Management
- Project planning
- Project scheduling methods
- Project progress measurement and forecast
- Project risk management
- Construction Project Management
- Exercises
[Module B] Module 2 - Process and Technology Management
- Process identification and description
- Process modelling (Business Process Model and Notation - BPMN) and process discovery
- Process analysis and redesign
- Technology management activities: acquisition, exploitation, identification, protection, selection
- Technology management tools: portfolio management, patent analysis, value analysis, stage-gate, S-curve, technology roadmapping
Modalità d'esame
Module 1:
Written exam: 2 hours; ILOs assessed: 1,2,3,4,5;
Presentation case study: 15 minutes per student group; ILOs
assessed: 5, 6, 7;
Module 2:
Written exam (1 exercise & 3 questions): 1,5 hours; ILOs
assessed: 8 - 18;
Case study (modelling and re-design): BPMN models + 1 page
report; ILOs assessed: 8, 11, 13, 18.
Assessment language: English
Project Management – Module 1:
The grade is calculated from the results of the written exam and the case study (exercise part). The theoretical part counts 50% and the exercise part counts 50% of the final grade.
Process and Technology Management – Module 2:
The grade is based on a written exam with exercises and theoretical questions and on a case study (on process modelling and re-design). The written exam counts 80%, and the case study
(modelling and re-design) 20% of the final grade.
The assessment is based on ability to solve exercises about the topics of the course (process mapping and re-organization and technology roadmapping), clarity of answers, mastery of language (also with respect to teaching language), ability to summarize and establish relationships between topics.
Final grade:
Average of Module 1 and Module 2 (but the mark in each Module must >= 18 to overcome the exam).
Testi di riferimento
Module 1 Lecture notes and documents for exercises will be available on the Microsoft Teams group of the module. Module 2 Lecture slides and notes will be available in the OLE page of the module (self-enrollment key will be provided to students in the first lecture).
[Module A] Lecture notes and documents for exercises will be available on the Microsoft Teams group of the module.
[Module B] Lecture slides and notes will be available in the OLE page of the module (self-enrollment key will be provided to students in the first lecture).
Module 1 - Project Management
· “Project Management for Construction” by Hendrickson http://www.ce.cmu.edu/pmbook/ · Meredith, J. and Mantel, S., (2000) “Project Management: A managerial Approach”, J. Wiley & Sons New York
· De Marco, A. (2011). “Project Management for Facility Constructions”, Springer Science & Business Media.
· Cantamessa, M., Cobos, E., Rafele, C., (2007) “Il Project Management – Un approccio sistemico alla gestione dei progetti”, ISEDI De Agostini.
· Pmi lexicon pm terms PMI.org
· Project Management: A Systems Approach to Planning, Scheduling, and Controlling 11th Edition by Harold R. Kerzner (Author)
· Project Management – Competency Development Framework
· www.iso.org ISO21500:2013 – ISO21502-5 www.pmi.org Project Management standard - PMBOK® GUIDE V Edition
· http://www.ipma-usa.org/ IPMA_ICB_4_0_WEB
Module 2 - Process and Technology Management
· Dumas, M., La Rosa, M., Mendling, J., & Reijers, H. A. (2018), 2nd edition. “Fundamentals of business process management”, Berlin: Springer. · Modeler user guide of BIZAGI, available at: http://help.bizagi.com/process-modeler/en/
Technology management
· Cetindamar, D., Phaal, R., & Probert, D. (2016). “Technology management: activities and tools”. Macmillan International Higher Education. · Phaal, R., Farrukh, C., & Probert, D. (2010). T-Plan: “The fast start to technology roadmapping: Planning your route to success”. University of Cambridge, Institute for Manufacturing.
[Module A] “Project Management for Construction” by Hendrickson http://www.ce.cmu.edu/pmbook/ · Meredith, J. and Mantel, S., (2000) “Project Management: A managerial Approach”, J. Wiley & Sons New York
· De Marco, A. (2011). “Project Management for Facility Constructions”, Springer Science & Business Media.
· Cantamessa, M., Cobos, E., Rafele, C., (2007) “Il Project Management – Un approccio sistemico alla gestione dei progetti”, ISEDI De Agostini.
· Pmi lexicon pm terms PMI.org
· Project Management: A Systems Approach to Planning, Scheduling, and Controlling 11th Edition by Harold R. Kerzner (Author)
· Project Management – Competency Development Framework ·
· www.iso.org ISO21500:2013 – ISO21502-5 www.pmi.org Project Management standard - PMBOK® GUIDE V Edition
· http://www.ipma-usa.org/ IPMA_ICB_4_0_WEB
[Module B] “Project Management for Construction” by Hendrickson http://www.ce.cmu.edu/pmbook/ · Meredith, J. and Mantel, S., (2000) “Project Management: A managerial Approach”, J. Wiley & Sons New York
· De Marco, A. (2011). “Project Management for Facility Constructions”, Springer Science & Business Media.
· Cantamessa, M., Cobos, E., Rafele, C., (2007) “Il Project Management – Un approccio sistemico alla gestione dei progetti”, ISEDI De Agostini.
· Pmi lexicon pm terms PMI.org
· Project Management: A Systems Approach to Planning, Scheduling, and Controlling 11th Edition by Harold R. Kerzner (Author)
· Project Management – Competency Development Framework ·
· www.iso.org ISO21500:2013 – ISO21502-5 www.pmi.org Project Management standard - PMBOK® GUIDE V Edition
· http://www.ipma-usa.org/ IPMA_ICB_4_0_WEB
Codice insegnamento unibz:28043
1 - Knowledge and understanding Review of some topics of the courses of the master’s degree (depending on the topics of the study project) 2 - Applying knowledge and understanding Ability to apply the competences…
Scheda dell'insegnamento
Obiettivi formativi
1 - Knowledge and understanding
- Review of some topics of the courses of the master’s degree (depending on the topics of the study project)
2 - Applying knowledge and understanding
- Ability to apply the competences acquired during the master’s degree to technical and/or management problems
- Ability to integrate competences and to interact with specialists in different fields/areas (e.g., production, automation, design, logistics)
3 - Making judgements
- Ability in data research, acquisition and interpretation
- Ability to set and solve, possibly in innovative ways, complex problems that may require an interdisciplinary approach
4 - Communication skills
- Advanced writing skills (including technical language)
- Reporting skills
- Oral communication skills
- Ability to work in teams
5 - Learning skills
- Independent study (taking responsibility for own study/learning/communications)
- Autonomous project planning and implementing
- Time management
Programma
In a study project, a complex task with special consideration of theoretical foundations is dealt with a practical example. The results are presented in a project report and an oral presentation. It must be supervised by at least two lecturers from the academic staff of the Master course or an interdisciplinary teaching team, whose members can act as coach and mentor.
The students have the possibility, in consultation with their supervisor, to work together with an external partner from industry on a company project.
Study projects can be individual or team projects. Team projects are limited to a maximum number of 6 students; the number of participating students is based on the complexity of the study and the workload needed to complete the study project tasks. Evidence of the need for a group to complete a task should be given by the main supervisor of the study project.
A list of topics is offered by the teaching staff also together with industrial partners before the beginning of the 3rd semester.
Students can also choose topics themselves and propose them to possible supervisors or to the study council. The topic of the study project should fit into the master program and enable to apply theoretical knowledge in practice.
Every student/group must submit his/their application for the study project to the administration upon agreement with the supervisor.
Projects from the provided list of topics will be approved by default, while others will be examined and approved by the Study Council.
At the end of the study project, students must write a project report. The project report should follow a scientific structure and consists basically of the following parts:
- Objective of the work
- State of the art and research
- Theoretical foundations and methods
- Conceptual part of the work
- Practical implementation (in the lab or in the company)
- Validation - Summary and Outlook
The length of the report should be about 30-40 A4 pages (about 9000-12000 words).
The due date for the final version of the report is at least 1 week before the official presentation.
At the end of the project, all students present their projects results. The presentation is public and mainly addressed to the master's teaching staff, students and project partners from industry. The duration of the presentation is, for individual
projects, 15min with an additional 10 min discussion in English. For group work the presentation time is increased of 10min for each additional student, while the duration of the discussion is decided by the commission.
Modalità d'esame
The evaluation of the project work is carried out by the supervisors responsible.
Formative assessment
In laboratory or in company activities (2,3,4,5)
Summative assessment
The assessment of the course is:
- Written report and oral presentation.
Written report to test the ability to use and transfer the acquired
knowledge as well as to make judgement and use proper technical
language (1,2,3,4).
Oral presentation on the project activities (1-5).
Project report and project presentation of 15-20 minutes (+10
minutes discussion) (learning outcome criteria 1-5)
In the case of a team assessment, the grade is a group result.
Evaluation Criteria
The language for the report as well as for the project presentation is English.
Criteria for the evaluation of the project report (70%): scientific structure, methodology, complexity and extent of the work, quality of the written report, quality of the results and autonomous work.
Criteria for the evaluation of the project presentation (30%):
structure of the presentation, language and communication skills, ability to reply to questions.
Testi di riferimento
Necessary readings and documents for the study project will be recommended by the supervisors.
Supplementary readings will be suggested by the supervisors.
Codice insegnamento unibz:23614
Recensioni del corso
Studi qui? Accedi per lasciare la tua recensione e aiutare altri studenti a scegliere.
Nessuna recensione per ora — e la prima è la più preziosa. Condividi la tua esperienza e orienta le future matricole.