Obiettivi formativi
The course aims to provide students with the fundamental concepts and methods required to model, analyse, verify and make basic design choices for load-bearing mechanical components, with particular attention to the link between material behaviour, geometry, loading conditions, manufacturing processes and failure mechanisms. The course is intended for students in Materials Engineering. For this reason, mechanical design is not presented as a catalogue of machine elements, but as a method to understand how real components carry loads, how stresses arise, how materials respond, and how failures can be prevented through appropriate design, material selection and verification. Mechanical components such as shafts, joints, bearings, gears, pressure vessels and fitted parts are introduced as case studies within broader design problems. They are used to illustrate concepts such as load transfer, stiffness, strength, plasticity, fatigue, fracture, contact, wear, joining, material selection and durability. Since students may enter the course with different backgrounds, the first part of the course includes an integrated module on the fundamentals of mechanics of materials. This module is part of the course and provides the common mechanical language required to analyse and verify load-bearing components. At the end of the course, students will be able to: Model real load-bearing components through simplified mechanical schemes, including free-body diagrams, support reactions, internal actions and basic stress states.Analyse stresses, strains, strength and stiffness in beams, shafts, cylinders, joints and other selected mechanical components using fundamental concepts of mechanics of materials.Interpret the response of materials and components under static loading, including yielding, plastic redistribution, stress concentration and the role of material ductility.Identify the main failure mechanisms affecting mechanical components, including static failure, fatigue, fracture, contact fatigue, wear, fretting and joint failure.Verify selected mechanical components and joints using simplified design and verification methods, with examples including shafts, shaft-hub couplings, welded and bolted joints, rolling bearings and spur gears.Make basic design choices concerning geometry, material selection, manufacturing quality and durability, based on the expected loads, constraints and failure mechanisms.Develop and present a guided design project in which modelling assumptions, material choice, failure mechanisms and verification criteria are integrated into a coherent engineering solution.In terms of transversal skills, the course contributes to developing the ability to reason quantitatively, simplify real engineering problems, work in a group, communicate technical results and critically discuss the assumptions and limitations of engineering models.
Programma
The course is organised into five main parts. 1. From real components to mechanical models The first part of the course introduces the mechanical modelling of real components. Examples are taken from machine parts and structures such as lifting mechanisms, transmission shafts, fitted components, box beams, bolted joints and welded joints. Topics include simplified analytical models, modelling assumptions, free-body diagrams, support reactions, external loads and constraints. Internal actions in beams and shafts are introduced, including axial force, shear force, bending moment and torque. Basic stress states are then recalled and applied to axial loading, bending, torsion and combined loading. Particular attention is devoted to the interpretation of internal actions and stresses, the physical meaning of section properties, the role of the section modulus, and the efficiency of different cross-sectional shapes. These concepts provide the mechanical foundation for the rest of the course. 2. Designing against static failure The second part of the course focuses on the verification of components under static loading. Strength and stiffness requirements are introduced together with the concepts of safety factor, reliability, uncertainty and design assumptions. The mechanical response of materials and components beyond the elastic limit is discussed with an engineering approach. Topics include yielding, plastic redistribution in beams and cylinders, stress concentration, ductility and safety under overload conditions. Pressure vessels and shaft-hub interference fits are used as case studies to connect material behaviour, stress state and component verification. The course introduces the essential concepts of static fracture mechanics required to understand the role of cracks and defects in mechanical design: stress intensity factor, fracture toughness and critical defect size. 3. Designing against fatigue, defects and fracture The third part of the course deals with fatigue and durability. Fatigue is presented as a localised, progressive and irreversible damage process. Topics include cyclic stresses, stress amplitude, mean stress, stress ratio, S-N curves, fatigue strength and simplified fatigue design methods. The influence of notches, surface condition, size, residual stress, defects, inclusions and manufacturing quality is discussed. Shafts are used as an integrating case study involving free-body diagrams, bending, torsion, stress concentration, static verification, fatigue verification and improvement through appropriate modelling, material selection, manufacturing control and design choices. Essential fatigue crack-growth concepts are introduced, including the Paris law and the link between fatigue, fracture and inspection. Particular attention is devoted to the relation between fatigue behaviour, material properties, processing route, surface treatment and manufacturing defects. Case studies involving simple cracked body configurations are used to understand damage tolerant approaches. 4. Designing joints, contacts and transmission components The fourth part of the course introduces selected mechanical components and joints as design case studies. The aim is not to provide an exhaustive catalogue of machine elements, but to show how the general methods introduced in the previous parts are applied to real components. Welded joints are discussed with reference to load transfer, stress concentration, fatigue, defects, residual stresses and the influence of the welding process. Bolted joints are analysed with reference to preload, load sharing, joint stiffness, fatigue, loosening and failure modes. Shaft-hub couplings are introduced with reference to torque transmission, keys, splines, interference fits, contact pressure, slippage, fretting, failure of shaft or hub, and mounting or demounting requirements. Rolling bearings are discussed as examples of durability-based component selection, with attention to radial and axial loads, equivalent load, bearing life, reliability, lubrication, contamination and contact fatigue. Spur gears are introduced as a case study in contact, bending fatigue, material selection and surface durability. Only spur gears are treated in detail. The geometrical and kinematic concepts are limited to those required to understand force transmission and verification: pressure angle, module, number of teeth, pitch diameter, addendum and dedendum. The focus is on tooth-root bending, contact pressure, materials, heat treatments, lubrication, wear, pitting, scoring and tooth-root fatigue. 5. Guided design project and synthesis The final part of the course is devoted to a guided group project on a mechanical component or subsystem. The project requires students to identify the function of the component, define loads and constraints, build a simplified mechanical model, choose or compare materials, identify relevant failure mechanisms and perform basic strength or durability verifications. The project is developed progressively through intermediate steps and project clinics. It is intended to help students connect the theoretical parts of the course with the engineering design of real components and to discuss possible improvements in terms of mass reduction, durability, sustainability, repairability or material substitution. The guided group project will be assigned approximately in the middle of the course, so that students can develop it progressively and avoid concentrating the entire workload close to the examination period.
The course is delivered through lectures, blackboard-based derivations, worked examples, problem-solving sessions, short individual checkpoints, discussion of engineering case studies and guided project activities. Slides are provided mainly as structured study material and as visual support for complex components, diagrams, failure cases and reference formulas. During lectures, particular emphasis is placed on the step-by-step construction of simplified mechanical models, free-body diagrams, internal actions, stress states and verification procedures. The initial module on the fundamentals of mechanics of materials is based on worked examples of mechanical components and is used to build the common modelling tools required throughout the course. This module is part of the core teaching material and may be assessed in the individual examination and in the short checkpoints. Short checkpoints are used during the semester to help students keep pace with the course, consolidate essential concepts, identify possible gaps in fundamental mechanics and receive early feedback. They are also intended to encourage continuous study and progressive learning. Checkpoints are carried out mainly in class, using paper-and-pen exercises or short written questions. They may be more frequent in the first part of the course, when common modelling tools are introduced, and less frequent in the final part of the semester, when students are also engaged in project work and exam preparation. The guided project is developed through intermediate steps and project clinics. During these activities, students work on their design problem under the supervision of the instructor, with the aim of limiting excessive workload outside scheduled teaching activities and improving the connection between lectures, exercises and project work. Students are expected to attend lectures and exercises, study the lecture notes and recommended material, solve the proposed exercises, participate in project clinics, complete the short checkpoints and contribute to the group project. Active and regular attendance is strongly recommended, because many learning activities are based on step-by-step modelling, in-class discussion, worked examples and feedback on short exercises. A weekly office hour will be scheduled on a fixed day and time. Students may attend either in person or online, according to the instructions provided on Moodle. Additional meetings may be arranged by appointment when needed.
Modalità d'esame
The final grade is expressed on a scale from 18/30 to 30/30, with possible distinction. The course is passed with a final grade of at least 18/30. The same assessment structure applies to all students. The project is an integral part of the course and is not an optional activity. The final grade is based on three components: 1. Individual final examination – 60% The individual final examination consists of an oral examination. No written examination is planned. The oral examination assesses the student’s ability to apply the fundamental concepts of mechanics of materials and mechanical design to the analysis and verification of load-bearing components. During the oral examination, students may be asked to discuss theoretical concepts, interpret simplified mechanical models, set up short design-oriented calculations, identify relevant failure mechanisms and comment on the assumptions and limitations of the methods used. The evaluation criteria include correctness of the mechanical model, ability to identify loads and constraints, correct use of formulas and units, understanding of the physical meaning of the results, ability to identify relevant failure mechanisms, appropriate use of technical terminology and clarity of the explanation. 2. Guided group project – 25% The guided group project assesses the ability to apply the methods discussed in the course to a realistic engineering design problem. The project focuses on the identification of the component function, loads and constraints; construction of a simplified mechanical model; selection or comparison of materials; identification of relevant failure mechanisms; and verification of strength, durability or functionality. The project will be based on a limited set of predefined design problems with controlled complexity. This is intended to make the activity feasible also for students entering the course with limited previous experience in mechanical design, while still requiring them to apply the modelling, verification and material-selection concepts developed during the course. The project deliverables include a small number of intermediate steps, a concise technical report or design file, and a final presentation. The specific format, length, group formation rules and deadlines will be communicated at the beginning of the course. The evaluation criteria include clarity of the problem definition, consistency of the mechanical model, correctness of the design calculations, appropriateness of the material choice, ability to connect material properties, geometry, loading and failure mechanisms, critical discussion of assumptions and limitations, and quality of the final presentation. 3. Short individual checkpoints – 15% During the semester, five short individual checkpoints or exercises are proposed. They are intended to consolidate the essential concepts of the course and to provide feedback on student learning. Checkpoints are short paper-and-pen activities, carried out mainly in class and normally requiring limited additional workload outside scheduled teaching hours. Their purpose is to support continuous learning and provide feedback, rather than to add a separate layer of homework. The checkpoints may address free-body diagrams and equilibrium, internal actions, elementary stress states, static verification, fatigue and fracture reasoning, component failure modes and material selection. The final checkpoint score is calculated using the best four results out of the five proposed checkpoints. This rule is intended to provide flexibility in case of occasional absence or difficulty, while encouraging continuous participation and progressive learning. Students with documented constraints that may affect participation in group activities or checkpoints should contact the instructor at the beginning of the course to define appropriate arrangements within the same assessment framework.
Testi di riferimento
The main teaching material consists of lecture slides, lecture notes, worked examples, exercise sheets, project guidelines and additional material provided through the Moodle page of the course. Suggested reference textbooks for the main topics of the course include: • R. G. Budynas and J. K. Nisbett, Shigley’s Mechanical Engineering Design, McGraw-Hill. • N. E. Dowling, Mechanical Behavior of Materials, Pearson. • R. C. Juvinall and K. M. Marshek, Fundamentals of Machine Component Design, Wiley. For students wishing to revise or consolidate basic concepts of statics and mechanics of materials, the following introductory references are suggested: • R. C. Hibbeler, Engineering Mechanics: Statics, Pearson. • R. C. Hibbeler, Mechanics of Materials, Pearson. • J. M. Gere and B. J. Goodno, Mechanics of Materials, Cengage Learning. • Vitor Dias Da Silva, Mechanics and Strength of Materials, Springer, Heidelberg, 2005. These introductory references are intended as support material for reviewing fundamental concepts such as equilibrium, free-body diagrams, internal actions, stress, strain, bending and torsion. They do not replace the lecture material and are not intended to extend the examination programme. Additional scientific papers, standards excerpts, technical notes, case studies and examples may be provided by the instructor when relevant. The slides and materials made available on Moodle are part of the study material for the exam. The instructor will clearly indicate which advanced slides, supplementary examples or optional topics are provided only for further reading and are not part of the core assessment. LINK AL MATERIALE BIBLIOGRAFICO reso disponibile dalle Biblioteche UniTrento (verifica la disponibilità in biblioteca) Suggested reference textbooks for the main topics of the course include: Budynas, R. G., & Nisbett, J. K. (2019).Shigley’s Mechanical Engineering Design . McGraw-Hill. Dowling, N. E. (2019). Mechanical behavior of materials : engineering methods for deformation, fracture and fatigue. (5. ed.). Prentice-Hall. Juvinall, R. C., & Marshek, K. M. (2021).Fundamentals of Machine Component Design . Wiley. For students wishing to revise or consolidate basic concepts of statics and mechanics of materials, the following introductory references are suggested: Hibbeler, R. C. (2017). Engineering Mechanics: Statics . Pearson. Hibbeler, R. C. (2018).Mechanics of Materials . Pearson. Gere, J. M., & Goodno, B. J. (2020).Mechanics of Materials . Cengage Learning. Dias Da Silva, V. (2010).Mechanics and Strength of Materials . Springer.These
Codice insegnamento 50890_651052_94946