Corso di laurea

Communications engineering

Università degli studi di Bologna · 64 materie · 0 file condivisi

Ecco tutti i dettagli sul corso di laurea selezionato. Sul UniDocs troverai gli appunti condivisi dagli altri studenti del tuo corso di laurea, ordinati per materia. Ricordati che per poter visualizzare il materiale devi essere registrato al sito e possedere un numero di crediti sufficiente.

Sfoglia il materiale didattico

Con UniDocs hai l'opportunità di studiare insieme a tutto il tuo corso di laurea. Guadagna subito dei crediti, carica il materiale del tuo ultimo esame!
Più condividi, più tempo avrai per studiare con tutta la community!

Materie del corso

Antennas for Wireless Systems M 1° anno · 2° semestre · 6 CFU · ING-INF/02 · 0 file

The role of antenna as strategic interface between transmitter/receiver and channel. Design rules for the principal families of antennas (wire, aperture, and microstrip antennas), and for their combination in array…

Scheda dell'insegnamento

Obiettivi formativi

The role of antenna as strategic interface between transmitter/receiver and channel. Design rules for the principal families of antennas (wire, aperture, and microstrip antennas), and for their combination in array architectures. Exploitation of antennas in modern energy-aware applications, such as radio-frequency energy harvesting or wireless power transfer systems.

Programma

1. Analysis approach
Recall of Maxwell’s equations: solution in a normal homogeneous medium
The non-homogeneous medium problem: scattering problem and interpretation of the antenna as a scatterer
2. Properties of the antenna operated in the transmitting and in the receiving mode
Antenna current distribution; radiated field; antenna reflection coefficient, antenna operating band
In far-field conditions: antenna polarization; radiated power; radiation intensity; radiation patterns; directivity; radiation efficiency and antenna (power) gain; antenna effective area
Impedance and polarization mismatch, received power
Friis transmission equation: basic analysis and design of a radio link
3. Electromagnetic dipoles and loop antennas
Closed-form and numerical analysis of dipoles
Loop antennas as magnetic dipoles
Basic analysis of NFC systems
Antennas for RF-ID applications
4. Array theory
Array factor and the principle of pattern multiplication
One- and two-dimensional arrays
Shielded arrays
Electronic scanning and phased arrays
Smart antennas
Parasitic elements
Arrays for terrestrial TV reception: Yagi-Uda, log-periodic, and bow-tie
5. Basic treatment of plane aperture antennas
Far field radiated by a plane aperture with arbitrary aperture field
TEM apertures
Radiation properties of uniform TEM apertures of circular shape
Parabolic reflectors
Applications: direct broadcast satellite receivers, radio telescopes
6. Microstrip patch antennas
Patch description as an array of magnetic apertures
Patch feeding techniques
Reduced-size PIFA antennas for 2G/3G mobile terminals
Multiresonant PIFA’s
Antenna broadbanding by the resonance envelope technique
Multiband antennas for 4G/LTE terminals
Self-scaling antennas for ultra-wideband applications
7. Planar antenna arrays
Planar microstrip planar arrays and their feeding network.
"Smart" planar arrays with high level of reconfigurability.
8. Rectifying antennas
Definition of rectifying antennas (or RECTENNAS) for both RF energy harvesting and Wireless Power Transfer applications
Choices in terms of i) rectenna architecture, ii) antenna.
9. Laboratory
Electromagnetic design of: i) planar RF-ID antenna; ii) microstrip patch antenna.
Realization of few samples of single band microstrip patches and their characterization from both near-and far-field points of view

Modalità d'esame

Oral interview on both theoretical and laboratory parts: for the laboratory activity (not compulsory), the production of reports on the developed antennas is established: these reports contribute to the final grade.
The interview lasts around 40 minutes: the candidates are requested to explain some physical phenomena/behaviors of different antennas. These explanations can be provided verbally or first written on paper and then discussed orally.
For students with learning disabilities (DSA) or temporary or permanent disabilities: it is recommended to contact the responsible university office in advance (https://site.unibo.it/studenti-con-disabilita-e-dsa/it): it will be their responsibility to propose any adjustments to the interested students, which must still be submitted, with a notice of 15 days, for the approval of the teacher, who will evaluate their appropriateness also in relation to the educational objectives of the course.

Testi di riferimento

  • Lectures slides
  • "Antenna Theory: Analysis and Design", Constantine A. Balanis
  • "Antennas and Radiowave Propagation", Robert E. Collin
  • "Lezioni di Sistemi d'Antenna", Vol. 1 and Vol. 2, V. Rizzoli, D. Masotti

Codice insegnamento 82072

Communication Systems: Theory and Measurement M 1° anno · 1° semestre · 9 CFU · ING-INF/03 · 0 file

At the end of the course, the student possesses knowledge of digital transmission with particular reference to terrestrial and satellite wireless systems. Specifically, the student is able to design a wireless link,…

Scheda dell'insegnamento

Obiettivi formativi

At the end of the course, the student possesses knowledge of digital transmission with particular reference to terrestrial and satellite wireless systems. Specifically, the student is able to design a wireless link, understands the issues related to digital modulation and demodulation, the effects of anomalous propagation, and the related techniques for their mitigation, including multi-carrier (OFDM) and multi-antenna (MIMO) schemes. Additionally, the student has knowledge of simulation and laboratory analysis of digital communication systems.

Programma

Module 1 - Prof. Alessandro Vanelli-Coralli Course Introduction and Communication Systems Overview
Introduction to the course: Objectives, structure, and learning outcomes Communication systems: wireless and wired communications; cellular communications; Non-Terrestrial Networks communications; The channel link capacity.
Communication Systems Fundamentals
Mathematical background for wireless systems: Real and complex Gaussian random variables. Rayleigh, exponential, and chi-square statistics. Real and complex Gaussian vectors. Basic matrix algebra, eigenvalue decomposition, and singular value decomposition (SVD). Digital communication fundamentals: PAM, sampling theorem, and reconstruction; Noise in Communication systems; Baseband vs. passband signals; Modulation and demodulation concepts, quadrature representation. ISI in bandlimited channels: Nyquist criterion, raised cosine filtering Link budget fundamentals: Path loss models, received power calculation Wireless channel: Wireless channel characteristics (free space propagation, path loss, shadowing, and multipath). Time and frequency selectivity (coherence time and bandwidth, Doppler spread and delay spread). Multipath propagation modeling (tapped delay line model, channel impulse response). Statistical channel models (Clarke model, Rayleigh fading, Jakes spectrum, and Rician fading)
Detection Theory Fundamentals
Introduction to detection theory: Hypothesis testing, Maximum A posteriori and Maximum Likelihood decision criteria in communications Examples and exercises: Binary detection problems
Optimal Transmission in Bandlimited Non-Selective AWGN Channels
Linear modulations: Signal space representation, constellation diagrams, and spectral characteristics Common modulation schemes: L-ASK, L-PSK, M-QAM analysis and comparison Optimal Receiver in AWGN: Matched filter and correlator Spectral and energy efficiency: Trade-offs and theoretical limits (Shannon capacity)
Transmission in the Presence of Channel Selectivity
Transmission in the presence of flat fading: Link budget criteria in the presence of fast and slow fading: outage probability and average probability of error. Optimal transmission in the presence of frequency selectivity: The MLSE receiver. Suboptimal schemes for adaptive equalization: linear equalizers.
Multiplexing and Multiple Access
Multiplexing and multiple access techniques OFDM principles: Orthogonality, cyclic prefix, and DFT implementation OFDM advantages and limitations: Frequency selective channels, Spectral efficiency, Complexity, Peak-to-average power ratio, synchronization sensitivity OFDM applications in 4G, 5G and 6G
Multi-Antenna Systems - Introduction
MIMO system definitions: Spatial diversity and multiplexing concepts SIMO systems: Maximal ratio combining (MRC) and selection diversity MISO systems: Transmit diversity and basic beamforming (Alamouti scheme) MIMO capacity: Brief introduction to spatial multiplexing gains
Module 2 – Prof. Gianni Pasolini
· Laboratory activity
Introduction to Matlab simulation software Design and implementation of functional blocks for the generation of modulated signals Design and implementation of functional blocks for the decoding of modulated signals Use of software defined radio devices

Modalità d'esame

The final assessment consists of a written test and an oral interview. Both the written test and the oral interview cover both modules and all of the subject introduced during the course.

Testi di riferimento

Slides and note of teh course will be made available during the courses
Suggested readings
D. Tse and P. Viswanath, "Fundamentals of Wireless Communications", Cambridge University Press, 2005. A. Goldsmith “Wireless Communications”, Cambridge University Press, 2005 J.Proakis, “Digital Communications”, Mc Graw Hill.

Codice insegnamento 35167

Communication Theory and Coding M 1° anno · 2° semestre · 6 CFU · ING-INF/03 · 0 file

At the end of this course, the student will have knowledge of the essential constructs underpinning Communication Theory and its application in telecommunications systems. In particular, the student will master the…

Scheda dell'insegnamento

Obiettivi formativi

At the end of this course, the student will have knowledge of the essential constructs underpinning Communication Theory and its application in telecommunications systems. In particular, the student will master the fundamentals of Information Theory, Decision Theory, and Estimation Theory, as well as their practical application to Channel Coding for error protection.

Programma

The course contents are divided in 12 Chapters:
1) Introduction to Information Theory
2) Capacity and channel coding theorem
3) Information Theory for continuous random variables
4) Block coding
5) Convolutional coding
6) Digital modulation techniques
7) Decision theory
8) Estimation theory and Estimation of auxiliary parameters
9) Detection in digital receivers
10) Detection in the presence of memory: decoding
11) Network Information Theory
12) Semantic Communications

Modalità d'esame

The final exam includes only an oral part. During the oral part, both closed and open questions will have to be answered , concerning all 12 chapters of the course.
The student is expected to show familiarity with all of the fundamental concepts of communications theory, with an ability to quickly recognise subjects and provide appropriate answers.

Testi di riferimento

Mandatory:

  • Course handouts by Prof. Giovanni Emanuele Corazza
    Optional:
  • Bao, J., Basu, P., Dean, M., Partridge, C., Swami, A., Leland, W., & Hendler, J. A. (2011). Towards a theory of semantic communication. 2011 IEEE Network Science Workshop, 110–117.
  • Calvanese Strinati, E., & Barbarossa, S. (2021). 6G networks: Beyond Shannon towards semantic and goal-oriented communications. Computer Networks, 190, 107930.
  • T.M. Cover, J.A.Thomas, Elements of Information Theory, New York, Wiley, 1991.
  • Van Trees, Harry L. Detection, estimation, and modulation theory, part I: detection, estimation, and linear modulation theory. John Wiley & Sons, 2004.

Codice insegnamento 87202

Electromagnetic Propagation for Wireless Systems M 1° anno · 1° semestre · 9 CFU · ING-INF/02 · 0 file

Mastery in engineering electromagnetic topics related to wave propagation. Knowledge of the main properties of radio propagation in real environment, expertise on path-loss models, multipath propagation modeling and…

Scheda dell'insegnamento

Obiettivi formativi

Mastery in engineering electromagnetic topics related to wave propagation. Knowledge of the main properties of radio propagation in real environment, expertise on path-loss models, multipath propagation modeling and radio channel wideband characterization. General comprehension of MIMO systems, diversity and spatial multiplexing techniques. Awareness of the main coverage and planning strategies for cellular radio, broadcasting and wireless systems. Assessment of wireless systems efficiency.

Programma

Part I – Fundamentals of Electromagnetic Theory (20 hours approx.)
Maxwell’s Equations
Complex representation of sinusoidal fields. Polarization of sinusoidal, vectorial fields. Maxwell’s equations in the time and frequency domain, boundary conditions.
Electromagnetic Waves
The wave concept and the electromagnetic radiation.
Electromagnetic field of a source in homogeneous medium: potential vectors, electromagnetic field generated by a point-source and by a volume-source. Far-field conditions and radiation field. Spherical waves. The reasons for attenuation of electromagnetic waves, propagation speed.
Plane waves: wave vector, uniform and evanescent plane waves.
Reflection of waves, standing waves.
Short hint to near-field communication.
Resonant electromagnetic fields.
Theorems
Poyinting and equivalence theorems, electromagnetic image principle.
Elettromagnetic Interactions
Reflection and refraction: reflection law and Fresnel coefficients for dielectric interfaces. Reflection and refraction in metals. Diffraction: Huygens principle and Kirhhoff’s theorem, Single knife-edge diffraction.
Geometrical Theory of Propagation
Historical survey, definition of optical ray. Wave equation for an inhomogeneous medium. Eikonal and Transport equations. Rays equations and rays trajectory. Examples: planar and spherical stratified medium. Ray tube and spreading factor. General expression of the electromagnetic field along a ray. Geometrical Optics: reflected and refracted rays. Geometrical Theory of Diffraction: Keller’s cone and diffraction coefficients.
Part II – Propagation in Wireless Systems (70 hours approx.)
Tropospheric/ionospheric propagation for long-range wireleless communications
Rays trajectory in the troposphere: refractivity, vertical gradient of refractivity and tropospheric ray curvature. Tropospheric index and sub-standard, standard and super-standard atmosphere. Radio horizon and equivalent earth radius.
Atmospheric losses on electromagnetic propagation
Atmosphere as a mixture of gases. Joule effects and electromagnetic absorption. Specific loss related to oxygen and water vapour, evaluation of total atmospheric loss for horizontal and slant wireless links. Rain loss and rain intensity. Statistical evaluation of the specific rain loss.
Wireless propagation in real environment
From ideal (Friis formula) to real propagation. Fading effects: radio link obstruction and multipath propagation. Dependence of a wireless digital system performance on the propagation conditions. Signal attenuation and distortion, flat and selective fading.
Introduction to the environmental effects: Impact of the terrain on the radio link (2-rays model).
Dispersive properties of the wireless channel: delay spread/coherence bandwidth, Doppler spread/coherence time, angle spread.
Radio channel modelling in time, space and frequency
Narrowband analyses of field distribution: path loss, shadowing and fast fading. Path Loss exponent and statistical distribution of fast/slow fluctuations. Narrowband propagation models (Okumura-Hata formula, Epstein-Peterson model,…). Fading margin and radio coverage.
Multipath effects and input-output functions of the (mobile) radio channel
WSSUS channel and characterization of the wideband propagation parameters (Delay Spread, Angle Spread, etc.) and wideband propagation models (rays models).
Multi-antenna systems
MIMO solutions and techniques for fading mitigation / channel capacity increase: spatial diversity, beamforming and spatial multiplexing

Modalità d'esame

The exam consists of a written test followed by an oral discussion.
The written test consists of an exercise structured into multiple open-ended questions, to be completed in person in approximately one hour, and covering one or more topics addressed during the course. The written examination is intended to assess the student’s ability to solve a problem, as well as their ability to demonstrate the soundness and coherence of the reasoning that led to the final result.
During the written test, the use of books, notes, and calculators is permitted. The use of any artificial intelligence tool during the examination is strictly prohibited and will result in the annulment of the test. For this reason, the use of electronic devices (smartphones, tablets) to consult digital material is strictly forbidden, without exception. In other words, during the exam, students may consult any supporting material provided that it is in printed form.
A passing mark on the written test (i.e., at least 18/30 on the exercise) is required in order to be admitted to the oral examination. The grading of the written examination takes into account not only the correctness of the results obtained, but also the clarity of the reasoning and arguments supporting the final result.
The oral discussion (lasting approximately 15–20 minutes) is intended to assess the student’s understanding of the fundamental concepts presented during the course.
The written test and the corresponding oral discussion must be completed within the same examination session (summer – June/July, autumn – September, or winter – January/February), though not necessarily on the same examination date.
The final grade, expressed out of thirty, is based on the overall assessment of both the written and oral examinations.

Testi di riferimento

Course slides and notes.
D.A. McNamara. C.W.I Pistorius, J.A.G. Malherbe, Introduction to the uniform geometrical theory of diffraction, Artech House, 1990.
H. L. Bertoni, Radio Propagation for Modern Wireless Systems, Prentice Hall, 2000
S.J. Orfanidis, Electromagnetic Waves and Antennas, free download at: http://eceweb1.rutgers.edu/~orfanidi/ewa/
N. Costa, S. Haykin, Multiple-Input Multiple Output Channel Models – Theory and Practice, Wiley& Sons, 2010.
E. Björnson, J. Hoydis L. Sanguinetti, Massive MIMO Networks: Spectral, Energy, and Hardware Efficiency, free download at: https://massivemimobook.com/wp/free-pdf/

Codice insegnamento 82069

Mobile Radio Networks M 1° anno · 2° semestre · 6 CFU · ING-INF/03 · 0 file

The student will be aware of the fundamentals of radio networks, covering aspects of the physical, data link and network layers, with specific reference to the evolution of mobile radio systems from GSM to 5G.

Scheda dell'insegnamento

Obiettivi formativi

The student will be aware of the fundamentals of radio networks, covering aspects of the physical, data link and network layers, with specific reference to the evolution of mobile radio systems from GSM to 5G.

Programma

INT - Introduction - 3 hours
INT.1 The Course
INT.2 Radio Networks
INT.3 Mobile Radio Networks
FDC - Fundamentals of Digital Communications - 7 hours
FDC.1 Fundamentals of Digital Communication
FDC.2 System Model
FDC.3 Radio Resources
FDC.4 Assignment of Radio Resources
FDC.5 Exercises and Discussion
CNA - Cellular Network Architectures - 8 hours
CNA.1 Fundamentals of Cellular Networks
CNA.2 Reuse
CNA.3 Trunking Efficiency
CNA.4 Network Spectrum Efficiency
CNA.5 Exercises and Discussion
CNA.6 Network Architectures: From GSM to LTE
CNA.7 Mobility Management and Localisation
CNA.8 Network Architectures: Evolution Towards 5G
MRC - Mobile Radio Channel - 4 hours
MRC.1 Fundamentals of Radio Propagation
MRC.2 Large And Small Scale Phenomena
MRC.3 Narrowband Mobile Radio Channel
MRC.4 Area Coverage Probability
MRC.5 Exercises and Discussion
DCN - Digital Communications in Noise Limited Conditions - 8 hours
DCN.1 Fundamentals of Noise Limited Conditions
DCN.2 Signal Based Power Control
DCN.3 Link Performance of M-QASK & OFDM
DCN.4 Link Performance in the Presence of Fading
DCN.5 FEC, ARQ, HARQ
DCN.6 Link Adaptation
DCN.7 Diversity and MIMO
DCN.8 Exercises and Discussion
DCI - Digital Communications in Interference Limited Conditions - 5 hours
DCI.1 Fundamentals of Interference Limited Conditions
DCI.2 Interference Based Power Control
DCI.3 Link Performance of M-QASK & OFDM with Interference
DCI.4 Capture Effect
DCI.5 Link Performance in the Presence of Fading and Interference
DCI.6 Interference Based Power Control from a Network Level Viewpoint
DCI.7 Exercises and Discussion
RRM - Radio Resource Management - 8 hours
RRM.1 RRM techniques
RRM.2 Scheduling
RRM.3 Handover
RRM.4 KPIs
RRM.5 Exercises and Discussion
MRN - Mobile Radio Networks - 14 hours
MRN.1 Steps from 2G to 4G
MRN.2 2G (GSM): Numerology
MRN.3 2G (GSM): Logical Channels
MRN.4 2G (GSM): Measurement Reports
MRN.5 2.5G (GPRS and EDGE)
MRN.6 4G: Overview
MRN.7 5G: Overview
MRN.8 4G: KPIs
MRN.9 4G: MDT
MRN.10 Seminars
Q&A: 3 hours

Modalità d'esame

The exam is oral.
The student will be judged based on its comprehension of concepts, on the detailed technical considerations regarding the techniques, algorithms and protocols discussed, and the ability to formalise concepts through diagrams, conceptual maps, mathematical models.
The minimum requirement to pass the exam is that all definitions and basic mathematical / graphical formulations are known and understood by the student.
More information, and tips, on www.robertoverdone.org.

Testi di riferimento

There is no book following the syllabus of this course.

Codice insegnamento 87203

Network Design M 1° anno · 1° semestre · 6 CFU · ING-INF/03 · 0 file

Acquisition of skills in fundamental mathematical models and methodologies for performance evaluation and dimensioning of communication networks, and related applications to network design. Knowledge of main network…

Scheda dell'insegnamento

Obiettivi formativi

Acquisition of skills in fundamental mathematical models and methodologies for performance evaluation and dimensioning of communication networks, and related applications to network design. Knowledge of main network models, quality of service mechanisms, control and management techniques and protocols for traffic and service engineering in evolving and emerging network scenarios, with applications to practical case studies.

Programma

Introduction to performance evaluation in Communication and Computer Networks
TELETRAFFIC ENGINEERING
Introduction to teletraffic engineering and queuing systems. Markov chains and birth-death processes. Markovian queuing systems and the Erlang formulas. Application to analysis, dimensioning and planning of circuit and packet switched networks.
END-TO-END CONTROL AND TRANSPORT LAYER PROTOCOLS
Overview of the TCP protocol. TCP flow and congestion control: the AIMD concept. Mathematical models to estimate the throughput of a TCP connection.

Modalità d'esame

The final exam is based on a written test on queuing systems and TCP protocol performance evaluation. Each student will be asked to solve two exercises and answer a question in writing. The exercises are of the same type as those presented in class and available as handouts, whereas the question can cover any course topic. Each exercise will be evaluated with a score between 0 and 13, whereas the maximum score for the question is 6. The duration of the written test is between two and two and a half hours, depending on the difficulty of the exercises proposed.
Students are not allowed to use textbooks, notes or other materials during the test. The use of artificial intelligence tools to take the final exam is strictly prohibited, and any such use constitutes a violation of academic integrity.
Students with specific learning disorders (SLD) or temporary or permanent disabilities are kindly requested to contact the relevant office at https://site.unibo.it/studenti-con-disabilita-e-dsa/en . The office is in charge of proposing possible adaptations, which must be submitted 15 days in advance to the approval of the instructor, who will also assess the appropriateness in relation to the educational objectives of the course.

Testi di riferimento

For contents related to traffic engineering:
F. Callegati, W. Cerroni, C. Raffaelli, "Traffic Engineering: A Practical Approach", Springer, 2023, ISBN: 978-3-031-09588-7
For contents related to TCP:
O. Bonaventure, "Computer Networking: Principles, Protocols and Practice", 4th edition, 2019 K. R. Fall, W. R. Stevens, "TCP/IP Illustrated, Vol. 1", 2nd edition, Addison-Wesley, 2012, ISBN: 978-0-321-33631-6 J. F. Kurose, K. W. Ross, "Computer Networking: A Top Down Approach", 8th edition, Pearson, 2021, ISBN: 978-1292405469

Codice insegnamento 82071

Optical Fiber Systems M 1° anno · 2° semestre · 6 CFU · ING-INF/02 · 0 file

Knowlegde of the operation of the building blocks of optical communication systems, aimed to their basic design in different realistic scenarios.

Scheda dell'insegnamento

Obiettivi formativi

Knowlegde of the operation of the building blocks of optical communication systems, aimed to their basic design in different realistic scenarios.

Programma

Module 1: “Generation, Transmission and Processing of Optical Signals”
Optical fiber: main characteristics
Modal Propagation in the dielectric slab. TE and TM modes Modal propagation in dielectric waveguides. Optical fiber. Single-mode and Multi-mode Optical Fibers; Plastic Optical Fibers Phase and group velocity. Transmission impairments. Attenuation, Dispersion, Nonlinear effects
Optical Transmitters and Receivers
LEDs, LASERs and Optical Transmitters PINs, APDs and main types of Direct Detection Receivers. Receivers for Coherent Systems
Active and Passive Optical Components and Devices for Telecommunications and Sensors
Scattering and Transmission Matrix concepts. Fabry-Perot cavity, Optical filters, Diffraction Gratings. Fiber Bragg Gratings. Optical Multiplexers and Demultiplexers, Add and Drop filters Directional Couplers, Splitters, Circulators Optical Amplifiers, Cross-gain Modulation and Wavelength Conversion Mach Zehnder and Electro-Absorption Optical Modulators
Module 2: “Outdoor and In-Building Optical Systems”
Optical Transmission Systems for Metro Area Networks and for the Access Network
Fundamental concepts, figures of merit and design parameters. Fiber to the Node/Curb/Building/Home (FTTx) solutions. Point to Point, Point to Multipoint and Hybrid schemes. Examples of FTTH systems design in real environments, including existing infrastructure exploitation, and cost evaluations
Optical Transmission Systems for the Transport Network
Fundamental concepts on digital optical links, figures of merit and design parameters. OOK Systems, DQPSK Systems, Coherent Systems Optical transmission systems for In-Building Scenarios
Fundamental concepts on RF-over-fiber systems, figures of merit and design parameters.
In-Building Fiber Distributed Antenna Systems (F-DAS): characteristics and design aspects. Fiber-based distribution of mm-wave signals: solutions and trends.

Modalità d'esame

The exam will consist in a written part which must be passed in order to attend to a subsequent oral part.
The written parts aims to check the capability of the student to solve numerical exercises, regarding the different parts of the program, of the kind that are solved in class during the course. The result of the written part will be a "judgement": insufficient/sufficient/fair/good/very good.
Aim of the oral part is to integrate the judgement coming from the written part, taking into account the capability of the student to explain the concepts in a clear manner, and his effective understanding of the program contents.
The final level of preparation of the student will be expressed by a score (min: 18, max: 30 cum laude)
Students with Special Learning Disorders (SLD) or temporary or permanent disabilities: it is recommended to contact the responsible University office in good time (https://site.unibo.it/studenti-con-disabilita-e-dsa/it): it will be their responsibility to propose any adaptations to the students concerned, which must however be submitted, 15 days in advance, to the approval of the teacher, who will evaluate the opportunity also in relation to the educational objectives of the course.

Testi di riferimento

Gerd Keiser, "Optical Fiber Communications", Mc Graw Hill

Codice insegnamento 75477

Trends in Communications M 1° anno · 2° semestre · 3 CFU · 0 file

The course is intended to extend knowledge on application fields and needs of evolving communication scenarios, to practice and develop interaction skills with lecturer and team working, to stimulate active learning.

Scheda dell'insegnamento

Obiettivi formativi

The course is intended to extend knowledge on application fields and needs of evolving communication scenarios, to practice and develop interaction skills with lecturer and team working, to stimulate active learning.

Programma

The course is organized as a collection of seminars given by experts in Telecommunications.
The seminars will be given both by PhD students (with the aim to create connections between the Master curriculum and research, with insights on possible opportunities for the preparation of the final project) and by experts from the Industry (with the aim to provide a view of the transversal role of telecommunications in real world scenarios).
The topics and list of seminars will be available soon.

Modalità d'esame

Evaluation of student's participation, their ability to interact with experts and to present prepared slides in front of the class will take place during the course. Reporting from team working will be also evaluated (students will be arranged in groups for this purpose), as well as report(s) on preferred seminar(s). Attendance to the seminars is compulsory (at least 85% of the seminars): the student has to provide one report on one seminar, or n reports on n seminars if n seminars are missed.
For students with learning disabilities (DSA) or temporary or permanent disabilities: it is recommended to contact the responsible university office in advance (https://site.unibo.it/studenti-con-disabilita-e-dsa/it): it will be their responsibility to propose any adjustments to the interested students, which must still be submitted, with a notice of 15 days, for the approval of the teacher, who will evaluate their appropriateness also in relation to the educational objectives of the course.

Testi di riferimento

Papers on the topic of the seminar or slide of the seminar itself are distributed in advance. Students are required to read the assigned papers/slides before the seminar and prepare questions.

Codice insegnamento 93330

BIG DATA FOR COMMUNICATIONS M 2° anno · 1° semestre · 6 CFU · ING-INF/03 · 0 file

In the first part of the course students are introduced to the fundamental concepts of Big Data, machine learning, and neural networks. The course also covers key aspects of probability theory and graph theory, which…

Scheda dell'insegnamento

Obiettivi formativi

In the first part of the course students are introduced to the fundamental concepts of Big Data, machine learning, and neural networks. The course also covers key aspects of probability theory and graph theory, which provide the foundation for understanding probabilistic graphical models (e.g., Bayesian networks). These models are widely used in industrial applications, including information validation, fault isolation, and reliability analessi, all of which are becoming increasingly relevant in modern contexts. The second part of the course focuses on more advanced topics in artificial intelligence, such as energy based models (e.g., Boltzmann machines). Students also gain practical experience in applying machine learning and other AI techniques to enhance the performance of communication systems by leveraging the vast amount of data available in contemporary wireless communication environments.

Programma

Please discard the text contained in the box "Learning Outcomes", as it is outdated. The program has changed with respect to the previous years and is organised as follows.
The course introduces the fundamental techniques used to analyse big application and network datasets, for the sake of advanced service provision and network management/optimisation, respectively, with reference to 5G/6G mobile radio networks. The data analysis techniques introduced, belong to the field of numerical optimisation, learning and AI (Artificial Intelligence).
Half of the course will be dedicated to hands-on and lab activities. Real world data will be used.
The course is split in two modules.
The first module will first describe the protocol and network architecture of 5G, then it will introduce optimisation, learning and neural network basics, with the goal to analyse data from a real world industrial 5G robotic application. Lab and hands-on sessions are included (about 10 hours).
The second module will introduce to 5G Key Performance Indicators (KPIs) and MDT data; then, more advanced AI techniques will be described and all practical activities will be geared towards the use of measured KPIs and MDT data to identify features in network data and exploit them to optimise some 5G RAN parameters. Lab and hands-on sessions are included, using real world KPI/MDT data from a 5G network (about 20 hours).
More details follow.
First Module.
1.1 Introduction to 5G.
1.2 Introduction to industrial AI based 5G/6G use cases.
1.3 Data-driven AI: training and test, supervised (regression, classification), unsupervised.
1.4 Machine Learning: linear/logistic regression, decision tree, random forests Deep Learning: artificial neuron, neural networks, back propagation, CNN, AutoEncode.
1.5 Data Analysis & Engineering: data vis, feature creation, missing/anomalous values, imbalanced data.
1.6 Description of an Industrial IoT Case Study.
1.7 Lab IIoT 1: Data Analysis and Engineering for IoT.
1.8 Lab IIoT 2: Deep Learning for fault prediction.
1.9 Hands-On Session: 1D-CNNs for IoT / mobile networks.
1.10 Hands-On Session: AutoEncoders for IoT / mobile networks.
Second Module.
2.1 Introduction to 5G KPIs and MDT Data.
2.2 Lab 5G 1: MDT & KPIs Data Analysis and Engineering.
2.3 Lab 5G 2: Radio KPIs regression.
2.4 Lab 5G 3: MDT to predict Radio KPIs
2.5 Fingerprinting Positioning, wKNN.
2.6 Lab 5G 4: MDT for Positioning.
2.7 Hands-On Session: RayTracing, Sionna, 6G Digital Twins.
2.8 Hands-On Sessions: 3D-CNNs.
2.9 Seminars on future uses of AI in 5G/6G networks.

Modalità d'esame

At the end of each module, a questionnaire with multiple choices plus the assignment of the task to analyse a dataset will be proposed.

Testi di riferimento

Slidesets, databases and software are provided by the instructor.

Codice insegnamento B8313

Connected Vehicles M 2° anno · 2° semestre · 3 CFU · 0 file

The course will provide an overview of the wireless technologies for connected vehicles and introduce the main standards for long and short-range communications. Particular emphasis will be on the solutions deriving from…

Scheda dell'insegnamento

Obiettivi formativi

The course will provide an overview of the wireless technologies for connected vehicles and introduce the main standards for long and short-range communications. Particular emphasis will be on the solutions deriving from Wi-Fi and cellular networks applied to cooperative intelligent transport systems.

Programma

The course provides an overview of the main wireless technologies for vehicle-to-everything (V2X) communications, including aspects of the various layers of the protocol stack and the main communication standards.
Topics include:

  • Introduction to V2X;
  • Protocol stack model of the ETSI Cooperative Intelligent Transport System (C-ITS);
  • Applications and facilities layer, with particular reference to C-ITS services (from CAMs to DENMs and day-2 services);
  • Networking and transport layer, with particular reference to GeoNetworking;
  • Vehicular Wi-Fi: IEEE 802.11p and related standards;
  • Cellular communications applied to V2X, with particular attention to short-range C-V2X (sidelink).
    Short laboratory activities are used to complement the theory.

Modalità d'esame

The exam will include two parts.
For the first part, the student selects a V2X use case and provides a 5 minutes pitch about its requirements, possible implementation, potential issues. Details will be provided during the course.
The second part aims at checking the acquisition of the main concepts discussed during the lectures and consists of an oral exam.
Details are provided through the material in Virtuale.
Students with DSA or temporary or permanent disabilities are advisable to contact the University office responsible (https://site.unibo.it/studenti-con-disabilita-e-dsa/it) in good time: it will be its task to propose any adaptations to the students concerned, which must in any case be submitted 15 days in advance to the lecturer for approval, who will assess the appropriateness of the adaptations in relation to the teaching objectives.

Testi di riferimento

Notes from the lectures and material shared by the teacher.

Codice insegnamento 99185

Cyber-Creativity and Innovation M 2° anno · 2° semestre · 3 CFU · 0 file

At the end of the course the student will gain knowledge of the following topics: The necessity for creativity and the emergence of generative artificial intelligence to enable the cyber-creative process. Learnings…

Scheda dell'insegnamento

Obiettivi formativi

At the end of the course the student will gain knowledge of the following topics: The necessity for creativity and the emergence of generative artificial intelligence to enable the cyber-creative process. Learnings from the science of creativity studies. Principles and practical uses of Large Language Models. The DA VINCI Model & Method for the creative thinking process. Strategies and components for specific thinking stages. Innovation: hurdles and strategies for success. Practical applications to study cases.

Programma

1) The necessity for creativity and its dynamic definition
2) Theoretical foundations of creative thinking. Cognitive modelling.
3) The rise of Generative Artificial Intelligence (Gen-AI). The cyber-creative process.
4) The Da Vinci thinking model. Strategies and processes for specific thinking stages.
5) Application of creative thinking to study cases.

Modalità d'esame

The course awards only a PASS/NO PASS evaluation
MANDATORY REQUIREMENT: Attendance in presence of at least 70% of classes is mandatory.
Assessment includes ideation exercises adopting the DA VINCI model for creative thinking, as well as online exercises.
The exam is completed through the final presentation of the generated ideas to an external jury, with mandatory presence by all students. An oral part may be requested in particular cases.

Testi di riferimento

Lecture notes.
Video lecture: https://www.youtube.com/watch?v=bEusrD8g-dM
Corazza, G. E. (2025a). The Cyber-Creativity Process: How Humans Co-Create with Artificial Intelligence, Palgrave Macmillan, Cham.
Corazza, G. E. (2025b). The Cyber-Creative DA VINCI Process. In Corazza, G.E. (Ed.), The Cyber-Creativity Process—How Humans Co-Create with Artificial Intelligence. Palgrave Macmillan, Cham.
Corazza G.E. (2016). Potential originality and effectiveness: The dynamic definition of creativity, Creativity Research Journal.
Corazza, G. E., & Agnoli, S. (2022). The DA VINCI model for the creative thinking process. In Homo creativus: The 7 C’s of human creativity (pp. 49-67). Cham: Springer International Publishing.
Vinchon, F., Lubart, T., Bartolotta, S., Gironnay, V., Botella, M., Bourgeois-Bougrine, S., Burkhardt, J. M., Bonnardel, N., Corazza, G.E., Glăveanu, V., Hanchett Hanson, M., Ivcevic, Z., Karwowski, M., Kaufman J.C., Okada, T., Reiter-Palmon, R., Gaggioli A. (2023). Artificial Intelligence & Creativity: A Manifesto for Collaboration. Journal of Creative Behaviour. Doi: https://doi.org/10.1002/jocb.597
Corazza G.E. (2017). Organic creativity for well-being in the post-information society. Europe's Journal Of Psychology, 13, 599-605.
Corazza, G. E. (2018). The Dynamic Universal Creativity Process. In R. Beghetto, & G. E. Corazza (Eds.), Dynamic Perspectives on Creativity: New Directions for Theory, Research, and Practice in Education. Springer.(forthcoming)
Corazza, G. E. (2018). Life in the Cyber-Physical Society: the Need for Organic Creativity. In I. Lebuda & V.P. Glaveanu (Eds.), The Palgrave Handbook of Social Creativity Research. Palgrave Macmillan (forthcoming)
Agnoli, S., Runco, M. A., Kirsch, C., & Corazza, G. E. (2018). The role of motivation in the prediction of creative achievement inside and outside of school environment. Thinking Skills and Creativity, 28, 167-176.
Agnoli, S., Franchin, L., Rubaltelli, E., & Corazza, G. E. (2018). The emotionally intelligent use of attention and affective arousal under creative frustration and creative success. Personality and Individual Differences.
Agnoli, S., Zanon, M., Mastria, S., Avenanti, A., & Corazza, G. E. (2018). Enhancing creative cognition with a rapid right-parietal neurofeedback procedure. Neuropsychologia.
Agnoli, S., Vannucci, M., Pelagatti, C. & Corazza, G.E. (2018). Exploring the Link Between Mind Wandering, Mindfulness, and Creativity: A Multidimensional Approach. Creativity Research Journal, 30(1), 41-53.
von Thienen, J., Meinel, C, & Corazza G.E. (2017). A short theory of failure [http://ecdtr.hpi-web.de/report/2017/001/] . Electronic Colloquium on Design Thinking Research, 17, 1-5.
Agnoli S., Corazza G.E., & Runco M. (2016). Estimating Creativity with a Multiple-Measurement Approach Within Scientific and Artistic Domains, Creativity Research Journal, 28(2), 171-176.
Agnoli S., Franchin L., Rubaltelli E., & Corazza G.E. (2015). An Eye-Tracking Analysis of Irrelevance Processing as Moderator of Openness and Creative Performance, Creativity Research Journal, 27, 125-132.
Corazza G.E., Agnoli S., & Martello S. (2014). Counterpoint as a principle of creativity: Extracting divergent modifiers from 'The Art of Fugue' by Johann Sebastian Bach, Musica Docta, 4, 93-105.
Corazza G.E., & Agnoli S. (2015). On the impact of ICT over the creative process in humans, MCCSIS Conference 2015 Proceedings, Las Palmas De Gran Canaria.
Agnoli S., & Corazza G.E. (2015). TRIZ as seen through the DIMAI creative thinking model, Procedia Engineering, 131, 807-815, Paris.
Corazza G.E., & Agnoli S., Eds. (2015). Multidisciplinary Contributions to the Science of Creative Thinking [http://www.springer.com/us/book/9789812876171] . Singapore: Springer.
Corazza G.E., Agnoli S., & Martello S. (2016). A Creativity and Innovation Course for Engineers. In C. Zhou (Ed.), Handbook of Research on Creative Problem-Solving Skill development in Higher Education. Hershey, GA: IGI Global.
Corazza G.E., & Agnoli S. (2015). On the Path Towards the Science of Creative Thinking. In G.E. Corazza and S. Agnoli (Eds.), Multidisciplinary Contributions to the Science of Creative Thinking(pp. 3-19). Singapore: Springer.
Corazza G.E., Agnoli S., & Martello S. (2015). Introducing Irrelevant Information in the Creative Process: the DIMAI model for Fashion Design. In Cultures, Fashion, and Society Notebooks 2015. Pearson - Bruno Mondadori. DOI: 10.17464/9788867741236
Corazza G.E. (2016). La scienza del pensiero creativo come acceleratore per l'innovazione industriale. In Culture del progetto e Industrie Culturali e Creative.

Codice insegnamento B5023

DISTRIBUTED SYSTEMS AND NETWORK AUTOMATION M 2° anno · 1° semestre · 6 CFU · ING-INF/05 · 0 file

This course intends to provide a solid foundation in distributed systems and their applications to network automation, covering key concepts like architectures, scalability, and communication protocols. Students will…

Scheda dell'insegnamento

Obiettivi formativi

This course intends to provide a solid foundation in distributed systems and their applications to network automation, covering key concepts like architectures, scalability, and communication protocols. Students will also gain practical skills in areas such as socket programming, APIs, virtualization and network automation, with hands-on experience on relevant open-source software platforms.

Programma

MODULE 1 - DISTRIBUTED SYSTEMS AND NETWORK AUTOMATION
Introduction to Distributed Systems, architectures. Processes, threads, virtualization, scalability. DNS and HTTP protocols. Communications, socket programming, APIs, remote procedure call. Introduction to the Python programming language. Practical lab exercises on the above topics. Cloud computing and service orchestration, OpenStack, Kubernetes. Network Function Virtualization (NFV), Open RAN (O-RAN). Software-Defined Networking (SDN), NETCONF. Practical lab exercises on the above topics.
MODULE 2 - Laboratory Sessions Delivered by JMA Wireless
Laboratory session on network automation using NETCONF. Advanced laboratory session on Kubernetes.

Modalità d'esame

The final examination will assess the student's ability to understand the principles and applications of distributed systems. Students will be asked to answer a few questions on the whole set of course topics, and report on the practical exercises or hands-on sessions performed during the course. Alternatively, students may complete and present a project agreed upon with the instructor.

Testi di riferimento

M. van Steen, A. S. Tanenbaum, "Distributed Systems," 4th Edition, 2023, ISBN: 978-90-815406-3-6. Other material provided by the instructors.

Codice insegnamento B8410

Deep Learning 2° anno · 2° semestre · 6 CFU · INF/01 · 0 file

At the end of the course, the student understands the foundational ideas, recent advances and application potential of deep neural systems. The student understands supervised and unsupervised techniques, basic neural…

Scheda dell'insegnamento

Obiettivi formativi

At the end of the course, the student understands the foundational ideas, recent advances and application potential of deep neural systems. The student understands supervised and unsupervised techniques, basic neural topologies, methods for visualizing and understanding the behavior on neural nets, adversarial and generative techniques, reinforcement learning, and recurrent networks. The student is able to apply such technologies to solving classification problems in realistic domains.

Programma

The course begins with an introduction to Neural Networks and Deep Learning, focusing on their typical training mechanism: the backpropagation algorithm.
We will discuss the main types of neural networks: feedforward, convolutional, and recurrent, providing concrete examples and examining architectures that have proven useful for image processing, localization, segmentation, style transfer, text processing, and many other applications.
Techniques for visualizing the behavior of hidden neural units will be explored, including those related to deep dreams and inceptionism. We will also cover techniques for fooling neural networks and modern generative techniques, including recent diffusion models.
The final part of the course will be dedicated to an introduction to Deep Reinforcement Learning, with particular attention to designing agents for video games, autonomous driving, and other situations that require complex and adaptive intelligent behaviors.
The course is part of the integrated curriculum with Machine Learning from the Artificial Intelligence Studies Program. Knowledge of the following subjects is assumed:
Machine Learning Analysis Algebra Python

Modalità d'esame

Individual project on topics defined by the teacher.
The grade can be optionally integrated by an oral examination.
The assesment method may change in relation with the attendance.

Testi di riferimento

Suggested readings:
Dive into Deep Learning
I.Goodfellow, Y.Bengio, A.Courville. Deep Learning. MIT Press.
Specific pointers to on line material will be provided at each lesson, in addition to the slides of the course.

Codice insegnamento 91250

Final Examination 2° anno · 3 CFU · 0 file

The final dissertation and its defence is the result of the research and the activities carried out by the student. Through the thesis preparation, the student develops an original research and acquires critical skills…

Scheda dell'insegnamento

Obiettivi formativi

The final dissertation and its defence is the result of the research and the activities carried out by the student. Through the thesis preparation, the student develops an original research and acquires critical skills to present his/her final results.

Codice insegnamento 86298

Final Examination If you select this activity, it means that you intend to write a thesis for which your continuous presence (in Unibo premises or at external companies/institutions) is NOT requested. 2° anno · 24 CFU · 0 file

After completing this unit, the student has gained the capacities to complete a project involving experimental researches in the field of applied spectroscopy. The project will be strongly encouraged to based on a…

Scheda dell'insegnamento

Obiettivi formativi

After completing this unit, the student has gained the capacities to complete a project involving experimental researches in the field of applied spectroscopy. The project will be strongly encouraged to based on a collaborative project between two of the partner institutions (joint Master Thesis)

Codice insegnamento 86300

High Frequency Electronic Circuits M 2° anno · 1° semestre · 6 CFU · ING-INF/01 · 0 file

The course deals with the analysis and design of high frequency electronic circuits. Students learn how high frequency front-ends work, to state and evaluate the specifications of their main building blocks and to face…

Scheda dell'insegnamento

Obiettivi formativi

The course deals with the analysis and design of high frequency electronic circuits. Students learn how high frequency front-ends work, to state and evaluate the specifications of their main building blocks and to face the tradeoffs involved in their design.

Programma

The course 84442 - High Frequency Electronic Circuits is made of two parts. Module 1 is given by prof. Alberto Santarelli (30 hours), whereas Module 2 is given by prof. Alberto Maria Angelotti (30 hours).
Basics: Review of radio transceiver architectures and their behavioural components. Implementing technologies. Modulation and demodulation schemes. Overview of high-frequency circuit applications. Electron Devices for microwave and millimetre-wave applications.
Small-signal Amplifiers: Scattering parameter and Smith Chart theory. Power Gain, Return Loss and VSWR. Impedance Matching. Design of Transistor Bias Networks (Field Effect and Bipolar Transistors). Design of lumped and distributed matching networks. Stability analysis of microwave amplifiers. Low-Noise Amplifiers. Sensitivity and dynamic range.
Power Amplifiers: Harmonic and Intermodulation Distortion Analysis. Gain compression, Third-Order Intercept point, energetic efficiency, Power Added Efficiency. Other figures of merit (ACPR, EVM, NPR,..). Power Amplifier behavioral models (AM/AM and AM/PM characteristics). Source and Load Pulling. Design of power amplifiers in A, B, C, F class of operation. Elements of Efficiency and Linearity Enhancement Techniques (Envelope Tracking, Doherty Amplifiers, Digital Pre-Distortion).
Computer Aided Design: Introduction to using CAD tools, practical exercises on FET basing and S-parameter simulation, stability analysis and impedance matching, single-tone and multi-tone Harmonic Balance analysis.

Modalità d'esame

Coherently with the learning objectives, the exam consists in two parts: 1. Theory and 2. CAD. The theory part of the exam consists in an oral interview. This is aimed at evaluating: 1. theoretical knowledge of concepts included in the course program; 2. how deep the student is able to develop the subjects (e.g., demonstrations); 3. their ability to plainly explain the subjects by using adequate technical language. One subject per module will be typically addressed during the interview. will be addressed during the interview. If requested, some time will be given before the interview for writing formulas, graphs, schemes, thought to be useful for subject exposition. The CAD part of the exam concerns the laboratory exercises. This is aimed at evaluating 1. the student's knowledge of the different tasks to be pursued with standard CAD tools for HF circuit analysis/design. 2. The abilities to autonomously carry out simple circuit simulation tasks and interpret the obtained results.

Testi di riferimento

During the course, slides used in class will be made available on the Virtual platform. These provide sufficiently detailed material for exam preparation. The following texts might also be considered for further study of the topics.

  • G. Gonzales, Microwave Transistor Amplifiers, Artech House
  • R. S. Carson, Radio communications concepts: Analog, J.Wiley&Sons
  • B. Razavi, RF Microelectronics, Prentice Hall
  • S. Cripps, RF Power Amplifiers for Wireless Communications, Artech House

Codice insegnamento 84442

INTERNET OF THINGS M 2° anno · 1° semestre · 6 CFU · ING-INF/03 · 0 file

This course introduces wireless communications for the Internet of Things (IoT). The course will describe the most used wireless technologies enabling the deployment of IoT networks. The theoretical part of the course…

Scheda dell'insegnamento

Obiettivi formativi

This course introduces wireless communications for the Internet of Things (IoT). The course will describe the most used wireless technologies enabling the deployment of IoT networks. The theoretical part of the course will provide to students skills for designing an IoT network, accounting for connectivity, medium access control layer and routing issues, while considering the propagation environment where the network is located. Laboratory activities will allow students to use wireless devices to setup and run small IoT networks in a realistic environment and study their performance.

Programma

The course is divided into three parts: 1) Theoretical part; 2) Laboratory sessions; 3) Seminars on case studies.
In the first part (approx. 25 hours) lectures will be dedicated to present IoT protocols to be used at the different layers, which are physical, medium access control (MAC), network and application layers. Main focus will be on MAC and network layer protocols, where some guidelines for the design will be given.
In the laboratory sessions (approx. 25 hours, starting from middle Oct.) is concerned students will have possibility to program MC1322 Freescale 802.15.4-compliant devices in order to setup a real IoT network. On one hand, the laboratory activities will consist in the observation of the network behavior (e.g., network formation, data transmission, etc.) and measurement of some performance metrics (e.g., throughput and delays). On the other hand, students will have the opportunity to implement their own applications and measure performance metrics when considering different parameter settings.
The third part (approx. 10 hours) seminars, dealing with some research hot topics and applications, like smart city, smart buildings and smart manufacturing, will be presented.
Prerequisites: it is requested students have knowledge of basic aspects of Telecommunications. In particular, basics concepts on spectrum analysis, modulations, thermal noise, performance of pass-band systems, basics of antennas and propagations in wireless medium.

Modalità d'esame

The exam will be composed of: 1) one open book (notes available) written part, including exercises on PHY and MAC layers (result: passed/borderline/not passed); 2) oral exam. In case the result of the written part is borderline, the oral is composed of: i) one question on the written part (PHY and MAC layers); ii) one question on the second part of the course, that is network and application layers; iii) 10 minutes presentation (with power point slides) on the laboratory activity. In case the result of the written part is passed, question i) above is skipped.
The presentation of the lab activity could be based on: i) one of the activity performed in Lab1 during the course and the related measurement results OR ii) a project invented, devised and implemented by the students. The latter project could be performed in group of maximum 3 people.
The final mark will be based on the performance achieved during the oral exam. The mark at the oral is derived as follows: starting from 30 and decreasing at each wrong reply. Laude is considered only for students presenting projects (option ii above) for the lab activity.
Students with specific learning disorders (SLD) or temporary/permanent disabilities:
We recommend contacting the University Office responsible for support services in a timely manner (https://site.unibo.it/studenti-con-disabilita-e-dsa/en ). The office will evaluate the students' needs and, where appropriate, propose possible accommodations. These must in any case be submitted for approval at least 15 days in advance to the course instructor, who will assess their suitability also in relation to the learning objectives of the course.

Testi di riferimento

Slidesets and material made available by the instructor.
Suggested book for students without background on telecommunications signal and systems: A. Bruce Carlson, "Communication Systems: An Introduction to Signals and Noise in Electrical Communication", ed. by Mcraw-Hill International Editions. The following Sections are those useful to follow the course: 2.1, 2.2, 2.3, 3.1, 3.2, 3.3, 5.1, 5.2, 5.3. Send an email to Prof. Buratti to requested the book.
Slides of the course will be available on VIRTUALE.

Codice insegnamento B8397

INTRODUCTION TO THE INTERNET OF THINGS T 2° anno · 1° semestre · 3 CFU · 0 file

This course deals with wireless communications for the Internet of Things (IoT). The course will be dedicated to the description of the main applications of the IoT and the available wireless technologies enabling the…

Scheda dell'insegnamento

Obiettivi formativi

This course deals with wireless communications for the Internet of Things (IoT). The course will be dedicated to the description of the main applications of the IoT and the available wireless technologies enabling the deployment of IoT networks. The student will be capable of identifying relevant and business-oriented applications of the IoT and the most suitable technology for the deployment of the specific application. The course will include some team working, where students will discuss and share ideas on novel IoT applications and where they will have the opportunity to observe some real networks and measure their performance.

Programma

Part I - Introduction (3 hours)

  • IoT: Definition
  • IoT: A Communication Perspective
  • IoT: Application Domains
  • The Course
    Part II - Fundamental Tools (15 hours)
  • Fundamentals of Wireless Communications
  • Fundamentals of Wireless Networks
  • Fundamentals of Wireless Controlled and Random MAC
  • Aloha and S-Aloha in Compact Networks
  • CSMA: Hidden and Exposed Node Problem
  • Radio Network Architectures
  • Short Range Systems: 802.15.4 and Zigbee
  • Long Range Systems: LoRa and LoRaWAN
  • Long Range Systems: NB-IOT
  • 5G
    Part III - Making the IoT (3 hours)
  • Preparation to the Lab activities
  • Smart Cities
  • Smart Manufacturing
    Part IV - Lab (9 hours)
    Hands-on sessions with LoraWAN and Grafana

Modalità d'esame

The exam will consist of two parts: a written test and a discussion of the outcomes of the group work.
The written exam will consist of some numerical exercises, based on the contents of Part I and II of the course, and a closed answer questionnaire with 30 questions. Each question has four answers, one is correct and gives one point, three are wrong and give -0.33; the student can also choose not to answer, scoring zero; the exam is passed if the total score is 18 or more. It is open book, with a duration of 30 minutes. It is held online.
For the discussion the students will provide a five-minute pitch; the pitch will present one of the hands-on activities performed including the numerical achievements. A short discussion will follow in order to determine whether the student has got the main aspects of the thory behind the experience.
The two parts of the exam will be made on the same date.
The outcome of the exam is pass or fail.
Students with specific learning disorders (SLD) or temporary/permanent disabilities:
We recommend contacting the University Office responsible for support services in a timely manner (https://site.unibo.it/studenti-con-disabilita-e-dsa/en ). The office will evaluate the students' needs and, where appropriate, propose possible accommodations. These must in any case be submitted for approval at least 15 days in advance to the course instructor, who will assess their suitability also in relation to the learning objectives of the course.

Testi di riferimento

Slidesets and material made available by the instructor.

Codice insegnamento B8304

Internship Abroad for Preparation for the Final Examination If you select this activity, you intend to enter a competition for international mobility (e.g. Thesis Abroad, Erasmus+, etc.) or to start an internship by applying on SOL – Internship (to know m 2° anno · 1° semestre · 21 CFU · 0 file
Internship for Preparation for the Final Examination If you select this activity, you intend to start an internship by applying on SOL – Internship (to know more go on your degree course’s website > homepage > studying>internship for the preparation of th 2° anno · 1° semestre · 21 CFU · 0 file
Intership in ICT M 2° anno · Annuale · 6 CFU · 0 file

Activity in ICT companies subjected to approval of the internship commission

Scheda dell'insegnamento

Obiettivi formativi

Activity in ICT companies subjected to approval of the internship commission

Codice insegnamento 82091

Introduction to Computer Architectures M 2° anno · 1° semestre · 6 CFU · ING-INF/05 · 0 file

Provide a vision of digital circuits at gate and register transfer level. Overview of microprocessor and memory architectures. Basics of testing, performance and power consumption at system level.

Scheda dell'insegnamento

Obiettivi formativi

Provide a vision of digital circuits at gate and register transfer level. Overview of microprocessor and memory architectures. Basics of testing, performance and power consumption at system level.

Codice insegnamento 84447

LABORATORY OF VEHICULAR NETWORKS M 2° anno · 1° semestre · 3 CFU · 0 file

The course guides the students through the design and implementation of simulations of wireless networks, with special focus on vehicular networks. Through the use open-source software, students will create realistic…

Scheda dell'insegnamento

Obiettivi formativi

The course guides the students through the design and implementation of simulations of wireless networks, with special focus on vehicular networks. Through the use open-source software, students will create realistic scenarios and assess the performance of wireless communications in examples of automotive use cases.

Programma

The aim of this course is to provide students with the fundamental concepts and practical skills required to simulate the performance of wireless networks, with a particular focus on distributed Vehicle-to-Everything (V2X) communications.
The course is organized into three conceptual steps:
Step 1 – Signal-level simulations: Students implement a complete transmitter–receiver chain, including modulation and channel coding, and evaluate its performance in the presence of additive white Gaussian noise (AWGN). Step 2 – Link-level simulations: Building on the signal-level implementation, students assess the performance of a wireless link by simulating the exchange of frames between two nodes under different distances and channel conditions. Step 3 – Network-level simulations: Students extend the analysis to multi-node scenarios, introducing medium access mechanisms and evaluating the resulting network performance.
Upon completion of the course, students will have acquired the fundamental knowledge required to simulate and evaluate the performance of distributed wireless networks, with particular emphasis on V2X communication systems.

Modalità d'esame

In advance to the exam, the student will be required to write a report about all laboratory activities (in any format, including slides or full text with figures).
The exam will be composed of an oral part (with a discussion of the report) and a practical part, where some simple modification to the developed software will be required; the objective of the practical part is not to focus on programming skills, but to verify the knowledge level of the discussed topics.
Students with DSA or temporary or permanent disabilities are advisable to contact the University office responsible (https://site.unibo.it/studenti-con-disabilita-e-dsa/it) in good time: it will be its task to propose any adaptations to the students concerned, which must in any case be submitted 15 days in advance to the lecturer for approval, who will assess the appropriateness of the adaptations in relation to the teaching objectives.

Codice insegnamento B8431

Laboratory Of High Frequency Electronic Circuit Design M 2° anno · 2° semestre · 3 CFU · 0 file

The student will learn the specific procedures for the analysis and the design of RF, microwave and millimeter-wave circuits by exploiting the most advanced CAD tools. Specific projects will be assigned to attendants.…

Scheda dell'insegnamento

Obiettivi formativi

The student will learn the specific procedures for the analysis and the design of RF, microwave and millimeter-wave circuits by exploiting the most advanced CAD tools. Specific projects will be assigned to attendants. Each project consists in the design of a typical RF or microwave circuit exploited in communication system front-ends (e.g. transmitters, receivers, transponders, transceivers) or in high-frequency remote sensor systems (e.g. radars, SARs, altimeters). Note: This course is taken from the Second-cycle Degree in Ingegneria Elettronica.

Programma

Frontal lectures are not delivered in this course.
Specific projects will be assigned to attendants. Each project will consist in the design of a typical RF or microwave circuit exploited in communication system front-ends (e.g. transmitters, receivers, transponders, transceivers) or in high-frequency remote sensor systems (e.g. radars, SARs, altimeters). The assigned RF/microwave circuit is selected among typical building block circuits, even according to the specific interests of the student, such as: power amplifiers, low noise amplifiers, oscillators (VCO, DRO, XO), mixers, multipliers and dividers.
Circuit technology: the assigned circuit could be intended for either a hybrid or monolithic implementation.
Requirements: general knowledge of electronic analog circuits, circuit analysis, Field Effect and Bipolar Transistors.
Prerequisites: attendance to “Elettronica delle Telecomunicazioni M-A” is encouraged even if not compulsory. Besides a close insight into the operation of several high-frequency circuits for telecommunication, this course also includes laboratory classes that give a first introduction on the use of CAD software.
Location: EDM-Lab (DEI) – CAD Room; the project is carried out by using PCs equipped with CAD tools. A PC-based station is assigned to each course attendant. Access to EDM-Lab is scheduled by the lecturer.

Modalità d'esame

The final test consists of the following parts which contribute to the evaluation of the student activity:
1) 5-page report of the simulated performances of the designed circuit and comparison with specifications.
2) Brief interview to describe the project directly in the CAD environment.

Testi di riferimento

1) G. Gonzales, Microwave Transistor Amplifiers, Artech House
2) Steve C. Cripps, “RF power amplifiers for wireless communications”, second edition, The Artech House Microwave Library, 2006
3) John L.B. Walker, “High Power GaAs FET Amplifiers” Artech House
4) Stephen A. Maas, “Nonlinear Microwave Circuits” Artech House
5) Stephen A. Maas, “Microwave mixers”, The Artech House Microwave Library, 1993
6) Advanced Design System (ADS) manuals and application notes at www.agilent.com

Codice insegnamento 73389

Laboratory of Advanced Networking M 2° anno · 1° semestre · 3 CFU · 0 file

This course intends to consolidate the knowledge of theoretical aspects of Communication and Computer Networks with practical experience, by means of hands-on experiments on network equipment and services. The student…

Scheda dell'insegnamento

Obiettivi formativi

This course intends to consolidate the knowledge of theoretical aspects of Communication and Computer Networks with practical experience, by means of hands-on experiments on network equipment and services. The student will learn how to design and manage a typical corporate telecommunication network and will gain the basic competencies of a network administrator. Laboratory sessions constitute a relevant part of the course schedule and will be based on both physical and virtual equipment.

Programma

The course covers advanced technical aspects of communication networks, with reference to consolidated technologies as well as state-of-the-art solutions for modern network infrastructures.
The course topics are firstly introduced and discussed from the theoretical point of view with traditional lectures, and then their practical aspects are analyzed with laboratory sessions using both open-source and commercial network equipment.
Specific topics covered by the course are as follows:
Interior routing protocols for IP networks: RIP, OSPF. Exterior routing protocols for IP networks: BGP. Advanced protocols for IP-based core networks: MPLS. Emerging network paradigms: Software Defined Networking. Introduction to virtualization technologies and related networking issues.
IMPORTANT: being this an advanced practical course on networking, students must already possess the required background knowledge to be able to fruitfully attend. Background knowledge will be verified at the beginning of the classes, in order to help students in deciding whether to attend the course.
In order to fruitfully attend the course, a solid understanding of networking basics is required, including:
layered network architectures and reference models (ISO-OSI, TCP/IP) local area network (LAN) protocols and technologies virtual LAN (VLAN) technologies TCP/IP protocol suite classless IP addressing, use of netmask, subnetting practical experience and use of protocol analyzers, including Wireshark and tcpdump.

Modalità d'esame

The final examination will assess the ability of each student to understand the advanced aspects of communication networks. The final test is composed of a brief written test, followed by an oral part during which each student will be asked to complete one of the practical lab exercises in a limited time, illustrating the steps to the instructor.
Students with specific learning disorders (SLD) or temporary or permanent disabilities are kindly requested to contact the relevant office at https://site.unibo.it/studenti-con-disabilita-e-dsa/en . The office is in charge of proposing possible adaptations, which must be submitted 15 days in advance to the approval of the instructor, who will also assess the appropriateness in relation to the educational objectives of the course.

Testi di riferimento

Lecture slides will be made available to the students, in electronic format.
Additional materials for consultation purposes include:
M. L. Merani, M. Casoni, W. Cerroni, Hands-On Networking. From Theory to Practice, Cambridge University Press, UK, 2009, ISBN-13: 9780521869850
Y.-D. Lin, R.-H. Hwang, F. Baker, Computer Networks: An Open Source Approach, McGraw-Hill, 2012, ISBN: 978-0-07-131587-6
K. R. Fall, W. R. Stevens, TCP/IP Illustrated, Vol. 1, 2nd edition, Addison-Wesley, 2012, ISBN: 978-0-321-33631-6
Linux man and info commands
Suggested documentation available on-line
Linux user's manuals
Commercial router and switch user's manuals

Codice insegnamento 93179

Laboratory of Microwave Photonics T 2° anno · 1° semestre · 3 CFU · 0 file

At the end of the course the student will be aware of how Radio signals, as well as Microwave, Millimeter-Wave and THz-frequency signals, can be efficiently controlled and distributed exploiting their appropriate…

Scheda dell'insegnamento

Obiettivi formativi

At the end of the course the student will be aware of how Radio signals, as well as Microwave, Millimeter-Wave and THz-frequency signals, can be efficiently controlled and distributed exploiting their appropriate interaction with the Optical ones. He/she will know how to measure the main parameters of Optical and RF devices and components, becoming familiar with the appropriate instrumentation. The student will finally be able to perform the experimental characterization of various systems, whose applications range from wireless communications and radars, up to sensors and radio astronomy, which will comprise the determination of multi-port scattering parameters, the acquisition of antennas radiation patterns, the evaluation of optical fiber systems for the remotization of antennas / array of antennas, and the performance assessment of optically controlled beamforming antennas.

Programma

Theoretical Part
The concept of Microwave Photonics will be explained and detailed about the components, architectures and main parameters which must be taken into account during the design phase. In detail:
Introduction to Microwave Photonic Systems, technologies and applications Radio-over-Fiber (RoF): principles, technologies and architectures Theoretical basics on the main optical components, such as LED/LASER, Optical Fiber and PhotoDetector Description of the main quantities which characterize the design of a RoF link: Gain, Noise Figure, 1dB Compression Point, Intercept points, Spurious Free Dynamic Range.
Experimental Part
Experimental setup will be realized by students to characterize the various component of a Microwave Photonic system. In particular:
Realization of an experimental setup for the DC characterization (L-I-V curve) of the laser diode and its monitoring current. Measurement of the attenuation produced by the optical fiber DC Characterization of the Photodiode and its main parameters. RF measurement of the reflection coefficients of laser diode and photodetector using a Vector Network Analyzer (VNA) Experimental test of Bias-T, Matching Circuit and Low Noise Amplifier (LNA) RF Gain Measurement of the optical link as a function of the laser parameter Measurement of 1dB compression point, and higher order non linear effect. Measurement of the noise introduced by the optical link and evaluation of the dynamic range of the link.
The following instrumentation will be used during the experimental activity:
DC Voltage Generator Laser Driver Digital Multimeter Optical Power Meter Vector Network Analyzer Electrical Spectrum Analyzer

Modalità d'esame

Oral Exam to Assess Understanding through Laboratory Report Analysis
The exam can be taken either as a group or individually.
In any case, in order to take the exam, the report must be submitted at least 3 days before the scheduled exam date.
Even in the case of a group exam, each member will be asked at least two questions.
To pass the exam, students are allowed to miss only one laboratory session.
In order to pass (i.e., to be deemed eligible), the student must demonstrate both theoretical and experimental understanding of the topics covered during the laboratory sessions. This includes, for example, the properties of the devices used and their impact on system design, the setup and calibration of measurement systems for both RF and optical parameters, and the interpretation of the quantities that describe devices and systems.
Students with Specific Learning Disorders (SLD) or temporary/permanent disabilities: You are strongly encouraged to contact the University Office responsible (https://site.unibo.it/studenti-con-disabilita-e-dsa/it ) in advance. This office will be responsible for proposing any necessary accommodations, which must be submitted to the instructor at least 15 days in advance for approval. The instructor will evaluate the appropriateness of the accommodations in relation to the course learning objectives.

Testi di riferimento

Cox III, Charles H, Analog Optical Links: Theory and Practice, 2004, Cambridge University Press Vincent J. Urick Jr, Jason D. Mckinney, Keith J. Williams, Fundamentals of Microwave Photonics, 2015, John Wiley & Sons, Inc S. Iezekiel Ed., Microwave Photonics: Devices and Applications, 2009, Wiley

Codice insegnamento 98957

Laboratory of Networking T 2° anno · 2° semestre · 3 CFU · 0 file

Students attending this course will consolidate their knowledge on theoretical and practical aspects of Communication and Computer Networks by means of hands-on experiments on real network equipment and services. The…

Scheda dell'insegnamento

Obiettivi formativi

Students attending this course will consolidate their knowledge on theoretical and practical aspects of Communication and Computer Networks by means of hands-on experiments on real network equipment and services. The students will learn how to design and manage a typical corporate telecommunication network and will gain the basic competencies of a network administrator.

Programma

This course focuses on some of the practical aspects of Communication and Computer Networks, with particular reference to IP network administration issues. Significant part of the course schedule is dedicated to hands-on laboratory exercises using open-source software platforms.
Specific course topics include:
Introduction to Linux as an operating system for network administration Software tools for network virtualization Software tools for protocol analysis: wireshark, tcpdump Basics of network security, SSH protocol IP addressing and network planning, subnetting Network interface configuration, manual and via DHCP protocol IP packet forwarding with direct and indirect delivery, ARP protocol, IP routing tables Ethernet switch and virtual LAN configuration (IEEE 802.1Q protocol) Firewall and NAT service configuration Basic configuration of IP routing protocols on Linux platforms

Modalità d'esame

The final examination will assess the student's ability to understand the practical aspects of Communication and Computer Network administration. Students will be asked to answer a few multiple-choice questions on the course topics, and then solve a practical exercise related to the lab practices performed during the course.
Students with specific learning disorders (SLD) or temporary or permanent disabilities are kindly requested to contact the relevant office at https://site.unibo.it/studenti-con-disabilita-e-dsa/en . The office is in charge of proposing possible adaptations, which must be submitted 15 days in advance to the approval of the instructor, who will also assess the appropriateness in relation to the educational objectives of the course.

Testi di riferimento

M. L. Merani, M. Casoni, W. Cerroni, Hands-On Networking. From Theory to Practice, Cambridge University Press, UK, 2009, ISBN: 9780521869850 K. R. Fall, W. R. Stevens, TCP/IP Illustrated, Vol. 1, 2nd edition, Addison-Wesley, 2012, ISBN: 978-0-321-33631-6 Y.-D. Lin, R.-H. Hwang, F. Baker, Computer Networks: An Open Source Approach, McGraw-Hill, 2012, ISBN: 978-0-07-131587-6 Slides provided by the instructor Linux man and info commands Suggested documentation available on-line Linux user's manuals

Codice insegnamento 87771

MULTIMEDIA SERVICES AND APPLICATIONS M 2° anno · 2° semestre · 6 CFU · ING-INF/03 · 0 file

At the end of this course, the student will have knowledge of the main mechanisms and techniques for efficiently represent, transmit and manage multimedia contents by focusing on the main standards for voice, audio,…

Scheda dell'insegnamento

Obiettivi formativi

At the end of this course, the student will have knowledge of the main mechanisms and techniques for efficiently represent, transmit and manage multimedia contents by focusing on the main standards for voice, audio, image, video compression, on multimedia communication and networking protocols (VoIP, RTP), multimedia content distribution, cloud computing and multimedia services.

Programma

Fundamentals of Information Theory and Lossy/Lossless Source Coding for multimedia applications. Image compression: from colour science to the JPEG standard. Video compression: video fundamentals, principles of Motion Compensation, and standard evolution (from H.261 to H.265/266). Audio compression: physics of sound, psychoacoustic models, and standardisation (vocoders and MPEG audio, i.e., MP3). Multimedia protocols: multimedia broadcasting (MPEG transport stream, MPEG program stream), media transport (RTP/RTCP), session description protocol (SDP), QoS management in IP networks (DiffServ, IntServ) and in 5G/6G. Multimedia streaming services: technologies (caching, content distribution networks, multicast, adaptive HTTP streaming) and architectures (Amazon Prime, Netflix, and others). Multimedia interactive services: QoS for voice services, VoIP (SIP, mobile VoIP, IP multimedia subsystem, VoLTE/VoNR).

Modalità d'esame

The assessment is performed through a written test and an oral presentation.
The written test is composed of both open and closed questions with 10 questions, to be answered in 90 minutes (minimum score 9/18). For the oral presentation, students shall focus on a specific topic: each student prepares a presentation for the final exam discussing the selected topic with proper detail (minimum score 9/18). During the final exam, the written test will also be discussed if needed.

Testi di riferimento

Z.-N. Li, M. S. Drew, and J. Liu, "Fundamentals of Multimedia", 3rd Edition, Springer Nature Switzerland, 2021 Hans W. Barz and Gregory A. Basset, "Multimedia Networks: Protocols, Design and Applications", Wiley, March 2016 L. Sun, I.-H. Mkwawa, E. Jammeh, and E. Ifeachor, "Guide to Voice and Video over IP - For Fixed and Mobile Networks", Springer International Publishing, 2013 J. F. Kurose, and K. W. Ross "Computer Networking: A Top-down Approach", 8th Edition, Pearson, 2021 Additional material distributed in class Standard and specifications provided during the course.

Codice insegnamento 69494

Machine Learning and Data Mining 2° anno · 1° semestre · 6 CFU · ING-INF/05 · 0 file

At the end of the course the student knows and understands: - the motivation and the components of the Data Mining process; - the general concepts, technologies and methodologies of Data Warehouse, OLAP and Data Lake, as…

Scheda dell'insegnamento

Obiettivi formativi

At the end of the course the student knows and understands: - the motivation and the components of the Data Mining process; - the general concepts, technologies and methodologies of Data Warehouse, OLAP and Data Lake, as enabling factors of the Data Mining process; - the principles and the most relevant use cases of a wide set of Machine Learning algorithms which are used to extract relevant and actionable information from large amounts of data. At the end of the course the student is able to: - design the main steps of a Data Mining process - choose the Machine Learning methods best suited for the process - evaluate the quality of the result in order to support strategic and operational decisions.

Programma

Part 1 - Data Mining
Introduction to the Data Mining Process Architectures of systems with data mining components Enterprise Data Warehouse Data Lake Case studies
Part 2 - Machine Learning
What is Machine Learning: some history and motivating examples Theory of learning Supervised vs unsupervised learning Classification and regression Model Selection, validation and presentation of results Regression Classification with linear discrimination, decision trees, Bayesian inference, Support Vector Machines, k-nearest neighbors, logistic regression, random forests, adaboost Ensemble learning, boosting, bagging Association rules and the Apriori algorithm Clustering/segmentation with k-means, dbscan, Expectation Maximization, hierarchical methods, kernel methods Analysis of case studies CRISP-DM methodology
Pre-requisites
Fundamentals of programming Fundamentals of calculus and linear algebra Fundamentals of statistics and probabilities Useful some general notion on Data Base Management Systems

Modalità d'esame

The Verification of knowledge is tested through multiple choice questions. The minimum to pass is to answer correctly half + 1 of the questions. The weight of this part is 33%.
The Verification of abilities will be tested in lab with the development of a program for the execution of a Machine Learning task on an assigned data set. The quality of the solution will be evaluated on the basis of the correctness of the approach, the correctness of the solution, the quality of the coding and of the documentation. The minimum to pass is to give a sensible approach and a reasonable coding. The weight of this part is 67%
It is also possible, on request, to have an oral examination, with possible outcomes between -3="no answer" and +3="correct answer", to be added to the weighted sum of the above-mentioned scores.
Additional details on Assessment are available in the course page on https://virtuale.unibo.it [https://virtuale.unibo.it/]
For the students of Machine Learning and Deep Learning (i.c.) the registration will be executed only after passing the Deep Learning module.

Testi di riferimento

Introduction to machine learning / Ethem Alpaydin. - 3. ed. - Cambridge : The MIT Press, 2014. - XXII, 613 p. - link to the online version [https://ebookcentral.proquest.com/lib/unibo/detail.action?docID=3339851] Scikit-Learn [https://scikit-learn.org/stable/documentation.html ], or Python Data Science Handbook [https://jakevdp.github.io/PythonDataScienceHandbook/]
Shearer C., The CRISP-DM model: the new blueprint for data mining, J Data Warehousing (2000); 5:13—22.

Codice insegnamento 95631

Machine Learning and Deep learning I.C. 2° anno · 2° semestre · 0 file

Al termine del corso, lo studente conosce e comprende: - i principi e i più importanti casi d'uso degli algoritmi di Machine Learning utilizzati per estrarre informazioni interessanti da grandi quantità di dati; - le…

Scheda dell'insegnamento

Obiettivi formativi

Al termine del corso, lo studente conosce e comprende: - i principi e i più importanti casi d'uso degli algoritmi di Machine Learning utilizzati per estrarre informazioni interessanti da grandi quantità di dati; - le specificità dei processi di analisi e manipolazione di Big Data - i principali framework disponibili per Big Data. - In particolare, lo studente è in grado di: - progettare un processo di Data Mining nelle sue principali fasi - scegliere i metodi di Machine Learning più adeguati al processo - valutare la qualità del risultato per supportare decisioni strategiche e operative.

Programma

Il corso e' tenuto in lingua inglese. Per i contenuti e le altre informazioni sul corso si faccia riferimento alla versione inglese.

Codice insegnamento B2127

Mathematical Methods M 2° anno · 1° semestre · 6 CFU · MAT/05 · 0 file

In the first part the student is supposed to learn the different types of graphs, their matrix representations, the related invariants and the problems which can find a model and solution in Graph Theory. In the second…

Scheda dell'insegnamento

Obiettivi formativi

In the first part the student is supposed to learn the different types of graphs, their matrix representations, the related invariants and the problems which can find a model and solution in Graph Theory. In the second part, differential equations of the first and second order are studied.

Programma

Module 1
The topics of Module 1, taught by Diego Ribeiro Moreira, include:
Orthogonality and Fourier series; Fourier sine and cosine series, even and odd functions, and half-range expansions; Basic convergence and approximation properties of Fourier series; Fourier integral, Fourier sine and cosine transforms, and Fourier transform on the real line; Basic properties of the Fourier transform; Discrete Fourier transform and fast Fourier transform; Elementary applications of Fourier methods to partial differential equations, including selected examples involving the heat equation, the wave equation, and Laplace's equation.
Prerequisites: elementary linear algebra, calculus of one and several variables, basic ordinary differential equations, and elementary complex numbers.
Module 2
The topics of Module 2, taught by Andrea Petracci, include: - Some topics in Linear algebra: diagonalization and spectral theorem; - Basic notions of complex analysis: holomorphic functions, radius of convergence of a power series, Taylor and Laurent series expansions for holomorphic functions, the z-transform and its region of convergence, poles of the z-transform; - Basic notions of graph theory: basic definitions, properties of the eigenvalues of the Laplacian matrix. The detailed syllabus and the lecture log will be available on the website: https://www.dm.unibo.it/~andrea.petracci3/2026MathMethodsM/ Prerequisites: linear algebra (solving linear systems, determining bases of vector subspaces, matrix operations, determinants, eigenvalues and eigenvectors, matrix diagonalizability) and calculus (limits, series, partial derivatives, one-variable integrals).

Modalità d'esame

Modules 1 and 2 Each module has a written exam, with theory and exercises. Calls are regularly scheduled on Almaesami. Exams are held in person. Registration for the chosen call on Almaesami is mandatory and must be completed at least 4 days in advance. Students may take each module exam during any call and must present their University badge (showing their name and a clear photo) before the exam begins. The grade for each module is expressed in X/30 and will appear on Almaesami. Students with learning disorders and/or temporary or permanent disabilities: please, contact the office responsible (https://site.unibo.it/studenti-con-disabilita-e-dsa/en/for-students ) as soon as possible so that they can propose acceptable adjustments. The request for adaptation must be submitted in advance (15 days before the exam date) to the lecturer, who will assess the appropriateness of the adjustments, taking into account the teaching objectives. Final mark and verbalization The final grading is given by the arithmetic average of the grades obtained in Module 1 and Module 2, rounded up to the nearest integer. The registration of the grade is made by prof. Diego Ribeiro Moreira. He signs the grades on Almaesami a few days after the completion of the two parts of the exam.

Testi di riferimento

Modulo 1
Main reference:
Kreyszig, Advanced engineering mathematics, 10th ed., selected topics from Chapters 11 and 12.
Additional lecture notes and exercises may be provided during the course.
Modulo 2 Some references are below. Additional or more precise references will be given during the course and will appear at https://www.dm.unibo.it/~andrea.petracci3/2026MathMethodsM/ Treil, Linear algebra done wrong, https://www.math.brown.edu/streil/papers/LADW/LADW.html Poole, Linear algebra, a modern introduction, 3rd ed. Anton, Kaul, Elementary linear algebra, 12th ed., Wiley Lay, Lay, McDonald, Linear algebra and its applications, Pearson Damelin, Miller, The mathematics of signal processing, Cambridge Texts in Applied Mathematics, Cambridge University Press, 2012 Esakkirajan, Veerakumar, Subudhi, Digital signal processing, Springer Kovacevic, Goyal, Vetterli, Foundations of signal processing, Cambridge University Press https://www.fourierandwavelets.org Mathews, Howell, Complex analysis for mathematics and engineering Moudgalya, Digital control, Wiley Proakis, Manolakis, Digital signal processing, 4th ed., Prentice Hall Kreyszig, Advanced engineering mathematics, 10th ed. Diestel, Graph Theory, 6th edition, Graduate Texts in Mathematics, Springer https://diestel-graph-theory.com/basic.html Bondy, Murty, Graph theory, Graduate Texts in Mathematics, Springer Chung, Spectral graph theory, American Mathematical Society

Codice insegnamento 73545

OPTIMIZATION MODELS AND ALGORITHMS M 2° anno · 1° semestre · 6 CFU · MAT/09 · 0 file

Integer Programming is a very powerful tool for modeling combinatorial optimization problems arising in many branches of engineering, industry and resource allocation. The first part of this course covers the modeling…

Scheda dell'insegnamento

Obiettivi formativi

Integer Programming is a very powerful tool for modeling combinatorial optimization problems arising in many branches of engineering, industry and resource allocation. The first part of this course covers the modeling aspects of the field, providing the tools for constructing effective mathematical models, i.e., models that can be solved in practice. The second part is devoted to the algorithmic aspects: basic algorithms are reviewed and more sophisticated ones, useful for those models characterized by a large number of variables and/or constraints, are presented in detail. Finally, the third part of discusses real-world applications.

Programma

Requirements: a good knowledge of linear algebra and basic mathematics is required.
The course is given in English: slides and exercises are in English. The exam must be taken in English.
The course focuses on optimization problems arising in decision making and the definition of mathematical models and exact algorithms to solve them. The mathematical theory on which these methods are based is elaborated through the study of theorems.
Contents
Introduction to optimization problems arising in decision making and to Mathematical Programming Convex programming, Linear Programming, simplex algorithm, duality theory Integer Linear Programming, branch-and-bound algorithm, classical combinatorial optimization problems, relaxations, computational complexity Exponential-size models, column generation, constraint separation Graph problems, examples of real-life applications, optimization software tools

Modalità d'esame

The exam consists of an oral exam in which the student solves some exercises (or parts of exercises) on topics of the course and answers questions on all topics of the course (including theorems and proofs).
The use of AI tools is strictly prohibited during the exam. Any use of such tools constitutes a violation of academic integrity.
Students with specific learning disorders (SLD) or temporary/permanent disabilities: We recommend contacting the University Office responsible for support services in a timely manner (https://site.unibo.it/studenti-con-disabilita-e-dsa/it). The office will evaluate the students' needs and, where appropriate, propose possible accommodations. These must in any case be submitted for approval at least 15 days in advance to the course instructor, who will assess their suitability also in relation to the learning objectives of the course.

Testi di riferimento

Slides on virtuale.unibo.it (at the web page of the course)
Further readings: Fischetti M. Introduction to Mathematical Optimization. Kindle Direct Publishing, 2019. Christos H. Papadimitriou and Ken Steiglitz, Combinatorial optimization: algorithms and complexity. Dover, 1998. D. Bertsimas and J. Tsitsiklis, Introduction to linear programming. Dynamic Ideas and Athena Scientific, Belmont, Massachusetts, 2008. D. Bertsimas, D. and R. Weismantel, Optimization over integers. Dynamic Ideas, Belmont, Massachusetts, 2005.

Codice insegnamento 69441

Optimization and Machine Learning M 2° anno · 2° semestre · 6 CFU · MAT/09 · 0 file

The aim of this course is to provide the student the ability of using both machine learning and mathematical optimization for advanced analytics. In particular, machine learning techniques are at the core of predictive…

Scheda dell'insegnamento

Obiettivi formativi

The aim of this course is to provide the student the ability of using both machine learning and mathematical optimization for advanced analytics. In particular, machine learning techniques are at the core of predictive analytics, where – based on historical data – one needs to predict the future outcome of a time series or classify unseen observations. Machine learning techniques build upon optimization techniques, and, in the case of neural networks, continuous optimization methods. Conversely, discrete optimization methods are at the core of prescriptive analytics, where one is required to make decisions optimizing a certain revenue / saving function by selecting within a discrete set. Discrete optimization methods are empowered by machine learning in estimating the parameters of the associated decision problems and, in some cases, benefit from machine learning to speed up the solution techniques.

Programma

Students attending this course are supposed to know basic notions on Operations Research, on implementation of algorithms and on the analysis of their computational complexity.
All lectures are given in English. Thus, good comprehension of this language is required.
The course introduces solution algorithms for nonlinear optimization problems that are the basis of many machine learning tools which find applications in telecommunications, electronics, automatic control and decision support systems.
The course is divided into two modules.
Module 1: the first module introduces solution algorithms for nonlinear optimization problems
Nonlinear optimization: introduction to mathematical programming, models and algorithms. Nonlinear models: unconstrained optimization and constrained optimization. Relaxations and penalty algorithms. Convex optimization: Lagrangian relaxation and barrier algorithm. Applications of convex optimization to support vector machine and deep learning.
Module 2: the second module introduces basic machine learning techniques for classification and regression.
Introduction to machine learning and data management Algorithms for clustering Algorithms for classification
Neural networks Interplay between discrete optimization and learning Laboratory guidelines to the implementation of learning algorithms

Modalità d'esame

For Module 1, there is a written exam (without books/notes) and/or an oral test (possibly, on the same day).
For Module 2, there is a takeaway project that needs to be completed within one week. The evaluation is based both on a code and a PDF explaining the setting and the results of the projects.
The final grade will be determined according to the grades of both Modules.

Testi di riferimento

Slides available online
For more details:
-- C. Bishop, Pattern Recognition and Machine Learning. Springer
-- S. Boyd e L. Vandenberghe, Convex Optimization. Cambridge University Press -- L. Grippo e M. Sciandrone, Metodi di Ottimizzazione Non Vincolata. Springer -- J. Nocedal e S. J. Wright, Numerical Optimization. Springer

Codice insegnamento 95601

Preparation for the Final Examination Abroad If you select this activity, you intend to enter a competition for international mobility (e.g. Thesis Abroad, Erasmus+, etc.). You will agree with your thesis supervisor the company/institution who will host y 2° anno · 1° semestre · 21 CFU · 0 file
Project Management and Soft Skills M 2° anno · 1° semestre · 3 CFU · 0 file

The student will learn how to acquire the necessary skills to be a successful engineer. In particular, non-technical (also known as soft) skills are discussed; among them, emphasis will be given to…

Scheda dell'insegnamento

Obiettivi formativi

The student will learn how to acquire the necessary skills to be a successful engineer. In particular, non-technical (also known as soft) skills are discussed; among them, emphasis will be given to inductive/deductive/analytical/design reasoning, to communication skills and employability. Moreover the student will learn how to use the basic tools of project management, including GANTT and PERT diagrams, workpackage breakdown, project cost estimation, and relevant aspects.

Programma

The syllabus is reported below. The course requires attendance.
I.Introduction (approx 3 hours).
II. A Pragmatic Approach to Project Management (approx 9 hours).

  • Projects, Roles, WBS
  • Gantt and PERT Diagrams
  • Cost Assessment
  • Submitting a Project Proposal
    III. Soft Skills and Aptitudes (approx 9 hours).
  • Introduction to Cognitive Processes
  • Human Behaviour
  • Success and Talent
  • Aptitudes
  • Team Work
  • Leadership
    IV. Communication Skills (approx 9 hours).
  • Fundamentals of Human Communication
  • Persuasion
  • Inter-Personal Communication
  • Presentation Skills
    The course will possibly include one seminar offered by a professional.

Modalità d'esame

Prior to the date of the exam (one week earlier) the student will deliver to the instructor:
1) a research project proposal, including a WBS, Gantt and PERT diagrams;
2) his/Her CV with a cover letter, simulating the application for a job position as project manager;
3) a slideset for a five-minute pitch.
By the day before the exam date, the student will be informed whether they can be admitted to the exam.
On the day of the exam, the student will undergo a written questionnaire plus an oral exam. The written questionnaire will include close-answer questions on the theoretical aspects addressed by the course. During the oral exam, the student will present in five minutes the slideset prepared.
More precise criteria for assessment will be provided during the lectures.

Testi di riferimento

Slidesets. Several books will be suggested for additional reading during the classes. None of them is specifically useful to cover the contents of the course. The course requires attendance.

Codice insegnamento 81799

Protocols And Architectures For Space Networks M 2° anno · 1° semestre · 3 CFU · IINF-03/A · 0 file

The student will learn how to solve through the use of DTN architectures (Delay-Tolerant Networking, RFC 4838) and the Bundle Protocol (RFC 5050) problems set by “challenged networks”.

Scheda dell'insegnamento

Obiettivi formativi

The student will learn how to solve through the use of DTN architectures (Delay-Tolerant Networking, RFC 4838) and the Bundle Protocol (RFC 5050) problems set by “challenged networks”.

Programma

Challenged networks Definition of “challenged networks”. Challenges: long delays, significant losses, intermittent connectivity, network partitioning. Examples: Interplanetary Internet, satelllite networks (GEO and LEO), emergency networks, underwater networks, communications in areas not covered by ordinary TLC networks (extreme environemnts), tactical networks, etc. The DTN architecture Description of the DTN architecture (RFC 4838). The Bundle Protocol Description of the Bundle Protocol v7 (RFC 9171) with differnces with respct to v6 (RFC 5050). Lab activities: use of Unibo-BP and DTNME (NASA MSFC) bundle protocol implementations. Use of the DTNperf tool. Application of the DTN architecture to the satellite networks Characteristics of satellite networks based on Geostationary (GEO) and Low Earth Orbit (LEO) constallations. Lab activities: example of application of the DTN architecture to GEO and LEO systems. Application of the DTN architecture to Interplanetary Internet Characteristics of Interplanetary networks. The LTP protocol. Lab activities: examples of application of the DTN architecture to IPN systems.

Modalità d'esame

Written test (open questions or quizzes) followed by a compulsory verification (on student's or professor's PC) of student's ability in carrying out the lab activities seen during the course. This exam has a binary result (pass/failure). Answers in Italian or French are allowed under students' request.
Exams in December, January, February, June-July and September.

Testi di riferimento

IETF RFC 4838 e RFC 9171. A few technical papers selected by the Professor. A few presentations by the Professor or by other DTN experts.

Codice insegnamento 75493

Radioprotection and Spectrum and Management M 2° anno · 1° semestre · 6 CFU · ING-INF/02 · 0 file

Provide the criteria for evaluation and control of electromagnetic fields in terms of interference and environmental impact. This course aims at providing the basis of generation, propagation and interaction of…

Scheda dell'insegnamento

Obiettivi formativi

Provide the criteria for evaluation and control of electromagnetic fields in terms of interference and environmental impact. This course aims at providing the basis of generation, propagation and interaction of electromagnetic fields with the environment and with biological systems, related to radio frequencies. Students will learn how to identify the main transmission characteristics for industrial and residential electromagnetic sources (radio broadcasting systems, cellular mobile radio systems, household (electrical) appliance, industrial equipment, etc.) and the main bioelectromagnetics mechanisms of interaction. Moreover student will have gained the capacity to identify the suitable prediction models and measurement tools in order to survey, assess and mitigate electromagnetic field exposure. This course is designed in order to provide direction for radio systems frequency planning and radio spectrum efficiency use.

Programma

The course aims at providing the fundamental principles governing the generation, propagation, and interaction of radiofrequency electromagnetic fields with the environment and biological systems. It will also address the main international standards and guidelines for electromagnetic exposure assessment and protection, together with the basic concepts of frequency planning for radio systems and radio spectrum management and optimization.
At the end of the course, students will be able to identify and characterize the radiofrequency electromagnetic emission features of the main sources present in outdoor, industrial, and residential environments. They will also acquire knowledge of the main mechanisms of bioelectromagnetic interaction, as well as the skills required to select appropriate measurement methods and instrumentation for the detection, assessment, and mitigation of electromagnetic exposure.
Radiofrequency electromagnetic field sources and their characterization: radio-frequency identification systems (RFID), radio access systems, mobile radio systems, and analogue and digital radio and television broadcasting systems. Electromagnetic exposure in free space and in real environments. Measurement methods and instrumentation for environmental and personal detection and monitoring of electromagnetic exposure. Legislation, regulations, and standards concerning environmental protection and the exposure of the general public and workers. Interaction between electromagnetic fields and biological systems: mechanisms of action and effects; in vitro and in vivo exposure systems; basic concepts of epidemiological studies. Spectrum efficiency and efficient use of the radio spectrum. Management and planning of spectrum resources: frequency compatibility, licensed systems, and unlicensed systems.

Modalità d'esame

The exam is organized into a written and a following oral test.
The written test is a multiple choice test aiming at assessing the knowledge of general concepts provided to the students during the course. The use of books and notes is not allowed. The result of the written test is expressed through a synthetic assessment: fail, satisfactory, good, excellent. Students must obtain at least a satisfactory assessment in order to proceed to the oral part of the exam.
The oral discussion aims at assessing the comprehension of the main concepts explained during the course. Written and oral tests should be preferably held on the same exam session; in any case the validity of the written test score is limited to the current academic year.
The final mark is the synthetic evaluation of both written and oral tests.

Codice insegnamento 82089

Satellite Communication and Navigation Systems M 2° anno · 2° semestre · 6 CFU · ING-INF/03 · 0 file

Understanding of the architecture of satellite communication systems and satellite positioning systems and the main design principles and performance trade-off. The class covers the ground, space, and user segments…

Scheda dell'insegnamento

Scheda dell'a.a. 2025/2026: quella dell'anno in corso non è ancora pubblicata.

Obiettivi formativi

Understanding of the architecture of satellite communication systems and satellite positioning systems and the main design principles and performance trade-off. The class covers the ground, space, and user segments fundamentals from a Communication Theory perspective.

Programma

The course is organized into two main parts: Satellite Communications Systems and Satellite Positioning and Navigation Systems. The first part addresses the main elements of a Satellite System Communication Architecture ground, space, user segments user and feeder links orbits and constellations link budget payload antennas Multibeam and single beam systems SatCom services: broadcast and broaband, fixed and mobile 5G and 6G Non-terrestrial Networks IoT via Non-Terrestrial Networks The second part, using several principles and concepts introduced in the first part, focuses on Satellite Positioning systems: Positioning principles Positioning principles applied to satellite systems the GPS system the Galileo system

Modalità d'esame

Written test and interview. The written test is mandatory, but not blocking.

Testi di riferimento

G. Maral, M. Bousquet, and Z. Sun, Satellite Communications Systems: Systems, Techniques and Technology. John Wiley & Sons B. Sklar, Digital Communications: Fundamentals and Applications. Upper Saddle River, NJ, USA: Prentice-Hall, Inc E. Kaplan and C. Hegarty, Understanding GPS/GNSS: Principles and Applications, Third Edition:, ser. Engineering professional collection. Artech House Publishers, 2017. Slide of the lectures with professor's notes

Codice insegnamento 82090

Technology and Change in Global Politics M 2° anno · 2° semestre · 6 CFU · SPS/04 · 0 file

The course aims to provide students with advanced knowledge of the interplay between technology and international politics. The course looks at how technology has shaped change in the international system and how…

Scheda dell'insegnamento

Scheda dell'a.a. 2025/2026: quella dell'anno in corso non è ancora pubblicata.

Obiettivi formativi

The course aims to provide students with advanced knowledge of the interplay between technology and international politics. The course looks at how technology has shaped change in the international system and how different states have used technology to advance their global positioning. At the end of the course students is able to: a) discuss major transformations of the international system, b) understand how political factors can affect technological change.

Programma

The course is organized in two parts, as detailed in the syllabus. In the first part (10 hours, taught by Professor Andreatta), the relationship between technological progress (or lack of it) and the use of force from antiquity until the early modern era. In the second part (20 hours, taught by Prof. Passalacqua), this historical knowledge is applied to the contemporary context. It will aim to provide occasions for in-depth discussions of selected case studies (e.g., on chips or 5G). Students will also learn how to write memos on policy-relevant topics. For a full description of the course contents, see the list of themes and readings in the section below. Given the comprehensive nature of the subject, this course is only intended for attending students. Attendance will be monitored. Students are also required to carefully read the assigned material before the class session and – in case of the seminars – active participation will be expected.

Modalità d'esame

Students will write a 1,500-word policy memo (+/- 20%) on a topic coordinated with the instructor. Details on the structure of the policy memo will be provided during the course.

Testi di riferimento

Readings/Bibliography 1. The use of force in Ancient Greece and Rome • Class notes on Virtuale, Chapters 1 and 2 2. The use of force in Middle Ages • Class notes on Virtuale, Chapter 3 3. A Revolution in Warfare? • Class notes on Virtuale, Chapters 4 and 5 4. Europe and the World • Class notes on Virtuale, Chapter 6 5. Technology and change in IR theory Realist, liberal and constructivist perspectives of technology • Gilpin, R. (1981). War and Change in World Politics. Cambridge University Press (Ch. 3). • Eriksson, J., & Newlove-Eriksson, L. M. (2021). Theorizing technology and international relations: Prevailing perspectives and new horizons. In Technology and International Relations (pp. 3-22). Edward Elgar Publishing. • Drezner, D. W. (2019). Technological change and international relations. International Relations, 33(2), 286-303. 6. State perception and regulation of technological innovation How states regulate risk of technological innovation (e.g., governance, cyber-security, New Economic State Craft) • Bradford, A. (2023). Digital Empires: The Global Battle to Regulate Technology. Oxford University Press (Ch. 1-3) • Clark-Ginsberg, A., & Slayton, R. (2019). Regulating risks within complex socio-technical systems: Evidence from critical infrastructure cybersecurity standards. Science and Public Policy, 46(3), 339-346. 7. State competition on technological innovation & Seminar (Chip war) How states promote technological innovation to improve their international standing (e.g., state strategies for innovation, political and economic factors influencing innovation) • Taylor, M. Z. (2016). The Politics of Innovation: Why Some Countries are Better than Others at Science and Technology. Oxford University Press (Ch. 5-6). • Miller, C. (2022). Chip war: the fight for the world's most critical technology. Simon and Schuster (some chapters). 8. Geopolitics of telecommunication and internet technologies & Seminar (5G) States’ conflicting views over telecommunication and internet technologies • Timmers, P., & Serentschy, G. (2023). Sovereignty and 6G. In The Changing World of Mobile Communications: 5G, 6G and the Future of Digital Services (pp. 253-282). Cham: Springer International Publishing. • Hoffmann, S., Bradshaw, S., & Taylor, E. (2019). Networks and geopolitics: how great power rivalries infected 5G. Osford Information Labs. 9. Technology and war (1): Conventional warfare & Seminar (Drone warfare) Impact of technological changes in conventional warfare and traditional militaries • Black, J. (2013): War and Technology. Indiana University Press (Introduction and Ch. 6) • Calcara, A., Gilli, A., Gilli, M., Marchetti, R., & Zaccagnini, I. (2022). Why drones have not revolutionized war: The enduring hider-finder competition in air warfare. International Security, 46(4), 130-171. • Calcara, A., Gilli, A., Gilli, M., & Zaccagnini, I. (2022). Will the Drone Always Get Through? Offensive Myths and Defensive Realities. Security Studies, 31(5), 791-825. 10. Technology and war (2): Unconventional warfare and the future of technological warfare Impact of technological changes in unconventional/hybrid warfare (e.g., cyber warfare, information warfare, IEDs) as a challenge to conventional military forces • Lanoszka, A. (2016). Russian hybrid warfare and extended deterrence in eastern Europe. International Affairs, 92(1), 175-195. • O’Hanlon, M. E. (2018). Forecasting change in military technology, 2020-2040. Military Technology, 2020, https://www.brookings.edu/wp-content/uploads/2018/09/FP_20181218_defense_advances_pt2.pdf • Biddle, S. (2023). Back in the Trenches: Why New Technology Hasn't Revolutionized Warfare in Ukraine. Foreign Affairs, 102, 153. 11. Expanding the arms race into new spaces (robotics, space, nuclear) Arms race of global powers in terms of technology (e.g., nuclear advancements, space warfare, US-China tech rivalry, North Korea’s missile program) • MacKenzie, D. (1989). Technology and the arms race. International Security, 14(1), 161-175. • Zala, B. (2019). How the next nuclear arms race will be different from the last one. Bulletin of the Atomic Scientists, 75(1), 36-43. 12. Political risk analysis & How to write a policy memo Conclusions and discussion of policy memos • For discussion part: three examples of good policy memos (exam preparation)

Codice insegnamento B5225

WIRELESS CIRCUITS AND SYSTEMS FOR ENERGY AND DATA TRANSFER M 2° anno · 2° semestre · 6 CFU · ING-INF/02 · 0 file

The course provides theoretical and applicative skills for the design of radio frequency components and circuits, both linear and nonlinear, to be used in modern low-power wireless systems on bord of sensors. In…

Scheda dell'insegnamento

Obiettivi formativi

The course provides theoretical and applicative skills for the design of radio frequency components and circuits, both linear and nonlinear, to be used in modern low-power wireless systems on bord of sensors. In particular, antennas integrated with transmitters and receivers will be designed. The main non-linearities involved will be studied and applied by CAD tools based on the harmonic balancing technique. The course will also provide practical skills for the design of these components by developing group projects.

Codice insegnamento B8394

BIG DATA FOR COMMUNICATIONS M - Not available for the year 2025/2026 1° semestre · 6 CFU · ING-INF/03 · 0 file
DISTRIBUTED SYSTEMS AND NETWORK AUTOMATION M - Not available for the year 2025/2026 2° semestre · 6 CFU · ING-INF/05 · 0 file
Final Examination - Not available for the year 2025/2026 3 CFU · 0 file
Final Examination - Not available for the year 2025/2026 If you select this activity, it means that you intend to write a thesis for which your continuous presence (in Unibo premises or at external companies/institutions) is NOT requested. 24 CFU · 0 file
High Frequency Electronic Circuits M - Not available for the year 2025/2026 1° semestre · 6 CFU · ING-INF/01 · 0 file
INTERNET OF THINGS M - Not available for the year 2025/2026 1° semestre · 6 CFU · ING-INF/03 · 0 file
INTRODUCTION TO THE INTERNET OF THINGS T - Not available for the year 2025/2026 1° semestre · 3 CFU · 0 file
Internship Abroad for Preparation for the Final Examination - Not available for the year 2025/2026 If you select this activity, you intend to enter a competition for international mobility (e.g. Thesis Abroad, Erasmus+, etc.) or to start an internship by 1° semestre · 21 CFU · 0 file
Internship for Preparation for the Final Examination - Not available for the year 2025/2026 If you select this activity, you intend to start an internship by applying on SOL – Internship (to know more go on your degree course’s website > homepage > studyi 1° semestre · 21 CFU · 0 file
Intership in ICT M - Not available for the year 2025/2026 Annuale · 6 CFU · 0 file
Introduction to Computer Architectures M - Not available for the year 2025/2026 1° semestre · 6 CFU · ING-INF/05 · 0 file
LABORATORY OF VEHICULAR NETWORKS M - Not available for the year 2025/2026 1° semestre · 3 CFU · 0 file
Laboratory Of High Frequency Electronic Circuit Design M - Not available for the year 2025/2026 2° semestre · 3 CFU · 0 file
Laboratory of Advanced Networking M - Not available for the year 2025/2026 1° semestre · 3 CFU · 0 file
Laboratory of Microwave Photonics T - Not available for the year 2025/2026 1° semestre · 3 CFU · 0 file
MULTIMEDIA SERVICES AND APPLICATIONS M - Not available for the year 2025/2026 2° semestre · 6 CFU · ING-INF/03 · 0 file
Machine Learning and Deep learning I.C. - Not available for the year 2025/2026 2° semestre · 0 file
Optimization and Machine Learning M - Not available for the year 2025/2026 2° semestre · 6 CFU · MAT/09 · 0 file
Preparation for the Final Examination Abroad - Not available for the year 2025/2026 If you select this activity, you intend to enter a competition for international mobility (e.g. Thesis Abroad, Erasmus+, etc.). You will agree with your thesis supervisor 1° semestre · 21 CFU · 0 file
Protocols And Architectures For Space Networks M - Not available for the year 2025/2026 1° semestre · 3 CFU · 0 file
Radioprotection and Spectrum and Management M - Not available for the year 2025/2026 1° semestre · 6 CFU · ING-INF/02 · 0 file
Satellite Communication and Navigation Systems M - Not available for the year 2025/2026 2° semestre · 6 CFU · ING-INF/03 · 0 file
Technology and Change in Global Politics M - Not available for the year 2025/2026 2° semestre · 6 CFU · SPS/04 · 0 file
WIRELESS CIRCUITS AND SYSTEMS FOR ENERGY AND DATA TRANSFER M - Not available for the year 2025/2026 2° semestre · 6 CFU · ING-INF/02 · 0 file

Recensioni del corso

Studi qui? Accedi per lasciare la tua recensione e aiutare altri studenti a scegliere.

★

Nessuna recensione per ora — e la prima è la più preziosa. Condividi la tua esperienza e orienta le future matricole.