Corso di laurea

Electric Vehicle Engineering

Università degli studi di Bologna · 52 materie · 0 file condivisi

Ecco tutti i dettagli sul corso di laurea selezionato. Sul UniDocs troverai gli appunti condivisi dagli altri studenti del tuo corso di laurea, ordinati per materia. Ricordati che per poter visualizzare il materiale devi essere registrato al sito e possedere un numero di crediti sufficiente.

Sfoglia il materiale didattico

Con UniDocs hai l'opportunità di studiare insieme a tutto il tuo corso di laurea. Guadagna subito dei crediti, carica il materiale del tuo ultimo esame!
Più condividi, più tempo avrai per studiare con tutta la community!

Materie del corso

Advanced Electric Drives M 1° anno · 1° semestre · 6 CFU · ING-IND/32 · 0 file

The course aims to provide a deep knowledge on the vector control of AC electric motors. At first, starting from dynamic equation, a control model on d-q axes of the following AC machines will be obtained: AC and DC…

Scheda dell'insegnamento

Obiettivi formativi

The course aims to provide a deep knowledge on the vector control of AC electric motors. At first, starting from dynamic equation, a control model on d-q axes of the following AC machines will be obtained: AC and DC Brushless Motor; Induction Motor; Synchronous Reluctance Motor; IPM Motor Using modern simulation methods based on Matlab/Simulink tools participants will learn how to design the main control architecture scheme for torque/velocity and position including the effect of torque disturbance as well.

Programma

Electromechanical energy conversion: Energy and Coenergy. Determination of force / torque delivered by an electric actuator. (ECTS 0,8; 8h )
Operating principle of the DC machine, permanent magnet and wound stator construction. Equivalent circuit and dynamic model. Mechanical characteristic, constant torque and constant power operating area. Torque and speed control. (ECTS 1; 10h )
Structure and operating principle of synchronous machines with or without permanent magnets. Stationary and dynamic models. Fields of application and comparison with the DC drives. (ECTS 1,5; 15h )
Structure and operating principle of the induction machine. Stationary and dynamic models. (ECTS 0,5; 5h)
Optimal control of electrical machines: MTPA, FW and MTPV trajectories, with special focus on the wound field synchronous machine (ECTS 1; 10h ).
Simscape modeling and simulation of torque and speed control (ECTS 1,2; 12h)

Modalità d'esame

The exam will take place at the end of the course according to the official exam session calendar. The examination is composed of a practical project and an oral discussion on the simulation and design of an electric vehicle.
The evaluation of the project is expressed out of thirty (a score greater than 30 results in obtaining a grade: 30 with honors).
The exam will last approximately 60 minutes. The evaluation indicators are: - Ability to use knowledge (25%) - Ability to connect knowledge (25%); - Mastery of technical language (15%); - Ability to discuss topics (20%) - Ability to deepen the topics (15%) The grade will be determined and communicated at the end of the oral exam.

Testi di riferimento

On the TEAMS of the course (in compliance with copyright) - The notes used by the professor during the lectures and numerical exercises - the slides of the lessons - The mathematical models introduced for numerical modeling and computer simulation with Matlab / Simulink
Not strictly necessary, in case of interest:
A. E. Fitzgerald , C. Jr. Kingsley , A. Kusko: "Electric machinery", McGraw-Hill Education, 2012. A. Emadi, “Advanced Electric Drive Vehicles (Energy, Power Electronics, and Machines)”, CRC Press; 1st edition (2014). N. Mohan, T. M. Undeland, W. P. Robbins: “Power Electronics: Converters, Applications and Design”, John Wiley & Sons Inc.

Codice insegnamento 91340

Advanced Electric Drives and Sensors M I.C. 1° anno · 1° semestre · 0 file

The course aims to provide a deep knowledge on the vector control of AC electric motors. At first, starting from dynamic equation, a control model on d-q axes of the following AC machines will be obtained: AC and DC…

Scheda dell'insegnamento

Obiettivi formativi

The course aims to provide a deep knowledge on the vector control of AC electric motors. At first, starting from dynamic equation, a control model on d-q axes of the following AC machines will be obtained: AC and DC Brushless Motor; Induction Motor; Synchronous Reluctance Motor; IPM Motor Using modern simulation methods based on Matlab/Simulink tools participants will learn how to design the main control architecture scheme for torque/velocity and position including the effect of torque disturbance as well.

Programma

Electromechanical energy conversion: Energy and Coenergy. Determination of force / torque delivered by an electric actuator. (ECTS 0,8; 8h )
Operating principle of the DC machine, permanent magnet and wound stator construction. Equivalent circuit and dynamic model. Mechanical characteristic, constant torque and constant power operating area. Torque and speed control. (ECTS 1; 10h )
Structure and operating principle of synchronous machines with or without permanent magnets. Stationary and dynamic models. Fields of application and comparison with the DC drives. (ECTS 1,5; 15h )
Structure and operating principle of the induction machine. Stationary and dynamic models. (ECTS 0,5; 5h)
Optimal control of electrical machines: MTPA, FW and MTPV trajectories, with special focus on the wound field synchronous machine (ECTS 1; 10h ).
Simscape modeling and simulation of torque and speed control (ECTS 1,2; 12h)

Modalità d'esame

The exam will take place at the end of the course according to the official exam session calendar. The examination is composed of a practical project and an oral discussion on the simulation and design of an electric vehicle.
The evaluation of the project is expressed out of thirty (a score greater than 30 results in obtaining a grade: 30 with honors).
The exam will last approximately 60 minutes. The evaluation indicators are: - Ability to use knowledge (25%) - Ability to connect knowledge (25%); - Mastery of technical language (15%); - Ability to discuss topics (20%) - Ability to deepen the topics (15%) The grade will be determined and communicated at the end of the oral exam.

Testi di riferimento

On the TEAMS of the course (in compliance with copyright) - The notes used by the professor during the lectures and numerical exercises - the slides of the lessons - The mathematical models introduced for numerical modeling and computer simulation with Matlab / Simulink
Not strictly necessary, in case of interest:
A. E. Fitzgerald , C. Jr. Kingsley , A. Kusko: "Electric machinery", McGraw-Hill Education, 2012. A. Emadi, “Advanced Electric Drive Vehicles (Energy, Power Electronics, and Machines)”, CRC Press; 1st edition (2014). N. Mohan, T. M. Undeland, W. P. Robbins: “Power Electronics: Converters, Applications and Design”, John Wiley & Sons Inc.

Codice insegnamento 93729

Advanced Sensors for Electric Vehicles M 1° anno · 1° semestre · 6 CFU · ING-INF/07 · 0 file

Aim of the course is to give a basic preparation, design skills, and understanding the specifications of sensors and measuring systems for automotive applications.

Scheda dell'insegnamento

Obiettivi formativi

Aim of the course is to give a basic preparation, design skills, and understanding the specifications of sensors and measuring systems for automotive applications.

Programma

The Course is split into two modules. The first one is focused on the fundamental concepts for the metrological characterization of measurement processes, and on the fundamentals of signal processing. The second module will focus mainly on the overview and analysis of a set of sensors relevant to the automotive scenario
In particular, the topics of the Course can be summarized as:
Module 1
*Basic metrology concepts.

  • Introduction to probability and statistic for signal processing.
  • The guide to the expression of uncertainty in measurements.
  • Basics of signal processing.
    Module 2
    *Measurement chain
  • From sensors to signal conditioning, ADC, processing
  • Static and Dynamic characteristics
    *Sensors
  • Hall effect sensors
  • Velocity and Acceleration
    + Incremental and absolute encoder and resolver
    + Variable Reluctance
  • Detectors of Humans
  • Temperature sensors
  • Sensor Networks for Automotive
    In the last part, the course will provide a view on the interconnections of sensors within modern automotive networks.

Modalità d'esame

Individual oral exam

Testi di riferimento

J. Fraden: Handbook of Modern Sensors, Physics, Designs, and Applications: Springer, 2016.
A. Ferrero, D. Petri, M. Carbone, M. Catelani (a cura di), Modern Measurements -- Fundamentals and Applications. --: Wiley / IEEE Press, 2015.
Educational documentation (slides, user manuals, component datasheets) provided by the professor and/or downloadable from "Virtuale" platform.

Codice insegnamento 93730

Diagnosis And Control M 1° anno · 1° semestre · 6 CFU · ING-INF/04 · 0 file

The course aims to give a systematic overview of the primary methodologies and technical norms that have to be used to rationally overcome issues related to faults and malfunctioning affecting modern engineering systems.…

Scheda dell'insegnamento

Obiettivi formativi

The course aims to give a systematic overview of the primary methodologies and technical norms that have to be used to rationally overcome issues related to faults and malfunctioning affecting modern engineering systems. The course topics include fault diagnosis methodologies as well as functional safety tools and standards that regulate the design of safety-critical systems. At the end of the course, - students will know fundamental tools and procedures to deal with failure/hazard analysis, occurrence/risk assessment, and occurrence/risk reduction; - students will know some relevant tools and methods to design fault detection and isolation algorithms linked to system and control theory.

Programma

Introduction:

  • Basic concepts;
  • Nomenclature.
    Reliability and Availability:
  • Main definitions and concepts;
  • Basics of non-state space methods;
  • Basics of state space methods;
    Safety:
  • Safety critical systems;
  • The IEC61508 standard;
  • Safety life cycle;
  • Fault Analysis techniques (HAZOP, FMEA, FTA)
  • Layer of Protection Analysis (LOPA);
  • SIL levels;
    Redundancy for Fault Tolerance:
  • Static and Dynamic redundancy;
  • Architectures and performance;
  • Analytic redundancy.
    Basics of some application domains:
  • Automatic machines;
  • Automotive.
    Model Based Fault Diagnosis;
  • Basics on Fault Detection and Isolation (FDI) and links with previous Sections.
  • Signal-based methods (useful for Model-based ones as well; SHT: LRT, GLRT, SPRT \Chi^2)
  • Parity equations (I/O and SS models, Deterministic/Stochastic)
  • Unknown Input Observers (UIO).
    REMARK: Contents are under review

Modalità d'esame

Final written exam including theoretical questions and simple exercises.
Detailed rules concerning exam characteristics (including how to book it), marks and registration procedure are given in a pdf file in the Teaching Material on Virtuale.
IMPORTANT: in order to do the exam, it is MANDATORY to be registered in the exam session lists in Almaesami, by the closing date of the specific lists. No exceptions will be possible. Students are expected to pay much attention to their registration in the exam lists and the related deadlines. Some messages might be sent to the list of Students registered for a particular exam session (in particular, after the closing of the list). These messages are fundamental for the exam arrangement (they include some mandatory instructions), therefore Students are recommended to read them carefully. Students with learning disorders and\or temporary or permanent disabilities: please, contact the office responsible (https://site.unibo.it/studenti-con-disabilita-e-dsa/en/for-students ) as soon as possible so that they can propose acceptable adjustments. The request for adaptation must be submitted in advance (15 days before the exam date) to the lecturer, who will assess the appropriateness of the adjustments, taking into account the teaching objectives.

Testi di riferimento

Material provided by the teacher (teaching material) is available on Virtuale (virtuale.unibo.it) (copies of the slides and handwritten notes, examples of exam questions, exam and registration rules, etc.). Students are recommended to register in the Virtuale list as soon as possible in order to download the material and to receive communications about the course sent by the instructor to the list members. These communications are fundamental for the course and the instructor will assume that all of the Students are receiving them (no excuses will be accepted). Password for registration will be given in the first lesson. For motivated late registrations, please send an email to the instructor with the following tag in the subject [D&C-M_LateReg]. Please, note that registering yourself in Virtuale does not imply that Diagnosis and Control M will be in your study plan. Virtuale is just a teaching support system. To include this course in your study plan (reported in Almaesami) as an elective course, you have to follow the procedure of your Master's degree program.
Remark: for some of the course topics, slides give just an overview and significant additional parts will be presented on the blackboard/virtual board. For such parts, some handwritten notes will be provided, but complete coverage of all contents is not guaranteed. In general, Students are expected to take their own notes to cover completely all of the contents presented in this course or to ask classmates for notes, whether they cannot attend some lessons.
Books:
Reliability Engineering [1] A. Birolini, Reliability Engineering: Theory and Practice, Springer, ISBN 9783642149528, 2010. Fault Analysis [2] J.D. Andrews, T.R. Moss, Reliability and Risk Assessment, Professional Engineering Publications, ISBN 1860582907, 2002. Functional Safety [3] D.J. Smith, K.G.L. Simpson, Safety Critical Systems Handbook: a straightforward guide to functional safety, IEC 61508 (2010 edition) and related standards, including process IEC 61511 and machinery IEC 62061 and ISO 13849, Elsevier Science, ISBN 9780080967820, 2010. Model Based FD [4] R.J. Patton, P.M. Frank, R.N. Clark, Issues of Fault Diagnosis for Dynamic Systems, Springer, ISBN 3540199683, 2000. [5] J. Chen, R.J. Patton, Robust Model-Based Fault Diagnosis for Dynamic Systems, Kluwer Academic Publishers, ISBN 0792382595, 1999. Fault Tolerance [6] M. Blanke, M. Kinnaert, J. Lunze, Diagnosis and Fault-tolerant Control, Springer, ISBN 3540010564, 2003. [7] R. Isermann, Fault-Diagnosis Systems: An Introduction from Fault Detection to Fault Tolerance, Springer, ISBN 3540241124, 2006.

Codice insegnamento 35166

Dynamics and Compliant Control of Electric Vehicles M 1° anno · 2° semestre · 6 CFU · ING-IND/13 · 0 file

The course deals with dynamics and control of electric vehicles and with the compliant implementation of control policies on the programmable electronics systems that supervise the operation of the vehicle. The…

Scheda dell'insegnamento

Obiettivi formativi

The course deals with dynamics and control of electric vehicles and with the compliant implementation of control policies on the programmable electronics systems that supervise the operation of the vehicle. The students will learn to describe a vehicle as a 3-D dynamic system, design optimal control strategies, and implement such strategies on the programmable electronics systems that supervise the operation of the vehicle, with focus on compliance with safety and reliability standards.

Codice insegnamento 93737

Electric Drivelines M 1° anno · 2° semestre · 6 CFU · ING-IND/32 · 0 file

In this course students: 1. Learn the fundamentals of cell electrochemistry, the materials characteristics and main issues related to the manufacturing process. 2. Classify the possible cell chemistry and technology in…

Scheda dell'insegnamento

Obiettivi formativi

In this course students: 1. Learn the fundamentals of cell electrochemistry, the materials characteristics and main issues related to the manufacturing process. 2. Classify the possible cell chemistry and technology in relation to the range of application in the automotive sector. 3. Learn modelling methodology for representing the cell output characteristic and the variability of cell parameters. 4. Understanding main issues related to the pack formation by series/parallel connection of cells. 5. Learn the sizing criteria for a battery pack. 6. Understand the most innovative electrochemical storage technology. 7. Learn the fundamental principle and sizing method for energy storage systems not based on electrochemical batteries: supercapacitors and flywheel.

Codice insegnamento 93735

Electrical Power Systems for Sustainable Mobility M 1° anno · 2° semestre · 6 CFU · ING-IND/33 · 0 file

The course deals with electric power systems for ground transportation, with particular reference to road electric vehicles and urban mobility. Two main aspects will be covered: - description and design of onboard…

Scheda dell'insegnamento

Obiettivi formativi

The course deals with electric power systems for ground transportation, with particular reference to road electric vehicles and urban mobility. Two main aspects will be covered: - description and design of onboard power systems that enable the flexible and functional connection and coordinated operation of the vehicle energy sources, storage units and loads; - analysis of the power and energy requests of the vehicles from the grid and integration of the feeding infrastructure in the grid. The course will provide the knowledge for the evaluation of the impact of the charging stations to the planning, operation, control, and protection of power distribution networks. The course will provide basic notions on the concepts commonly referred to as Vehicle-to-Grid (V2G), Vehicle-to-Building (V2B) and Vehicle-to-Home (V2H). In this context, the vehicles are not seen by the network as simple loads, but they can contribute to the operation of the network or a microgrid with the provision of balancing and ancillary services.

Codice insegnamento 93734

Electrochemical Energy Storage and Conversion M 1° anno · 1° semestre · 6 CFU · ING-IND/32 · 0 file

In this course students: 1. Learn the fundamentals of cell electrochemistry, the materials characteristics and main issues related to the manufacturing process. 2. Classify the possible cell chemistry and technology in…

Scheda dell'insegnamento

Obiettivi formativi

In this course students: 1. Learn the fundamentals of cell electrochemistry, the materials characteristics and main issues related to the manufacturing process. 2. Classify the possible cell chemistry and technology in relation to the range of application in the automotive sector. 3. Learn modelling methodology for representing the cell output characteristic and the variability of cell parameters. 4. Understanding main issues related to the pack formation by series/parallel connection of cells. 5. Learn the sizing criteria for a battery pack. 6. Understand the most innovative electrochemical storage technology. 7. Learn the fundamental principle and sizing method for energy storage systems not based on electrochemical batteries: supercapacitors and flywheel.

Programma

he course is divided in two parts that will be teached by two different professors:
Prof.ssa Francesca Soavi, Electrochemistry of energy storage and conversion cells, 3 CFU
Prof. Davide Pontara, Batteries in Traction Applications, 3 CFU
The teachers will follow the overall program reported here after.
Ion lithium batteries. Technology
Basic cell chemistry.
Chemical-physical properties and reactivity of the cell fundamental components: cathode, anode, separator and electrolyte.
Cell operation, cell stability, cell safety, cell ageing.
Characteristic of ancillary parts: collector, insulation, case, protection systems.
Standard protocols for cell evaluation.
Selection of proper battery chemistry (LIFePO4, Li-metal oxides) for possible automotive application (BEV, HEV).
Characteristics of the ion-lithium batteries manufacturing sector and of the corresponding market.
Classification of energy storage system for automotive application in relation to the vehicle type (BEV, HEV, PHEV). Battery positioning on Ragone plot.
Ion lithium batteries. Model
Basic and precise model of a ion-lithium cell using concentrated parameters.
State of charge (SOC) estimation.
Influence on cell parameters of: SOC, lifetime, temperature, cycles.
Modification of output characteristic and usable capacity due to the parameter variation.
Performance evaluation method for ion -lithium cells.
End of Charge and End of Discharge condition.
Battery pack and Battery Management Systems (BMS)
Battery pack and battery management system (BMS)
Criteria for selecting optimal pack voltage level.
Pack sizing and series/parallel connection of cells.
Analysis of the effect of cell parameter dispersion in determining End of Charge and end of Discharge process.
Cell equalization principle. Active and passive equalization methods and circuits.
Functional requirements for the BMS and interfacing characteristics with other powertrain components.
Possible BMS topologies.
Thermal control of battery pack
BMS safety function and standard requirements for management of ion-lithium cells
Other energy storage systems
Storage system with high power density: supercapacitors (KERS).
General characteristics and main issues related to the application of supercaps and flywheel to the automotive sector. Simplified model at component level. Design criteria of a high power storage system based on these technologies.

Modalità d'esame

The exam consists of two tests, one for each module. The final grade will be the average of the evaluation obtained by the student for the two modules. The final exam is oral and aims to verify, on the basis of two questions on the main topics covered and on the presentation and results of the laboratory activity conducted by the student, both the acquisition of the knowledge required by the course program and the student's ability to move within the topics covered during the course. There are no intermediate tests Elements of judgment used for the attribution of the grade: the ability to discuss and critically analyze the topic posed by the teacher will be evaluated. Particular attention will be given to the expository order and the formal correctness of the discussion, i.e. the correct use of the units of measurement and equations for the evaluation of the performance of the devices.
Students with learning disorders and\or temporary or permanent disabilities: please, contact the office responsible (https://site.unibo.it/studenti-con-disabilita-e-dsa/en/for-students ) as soon as possible so that they can propose acceptable adjustments. The request for adaptation must be submitted in advance (15 days before the exam date) to the lecturer, who will assess the appropriateness of the adjustments, taking into account the teaching objectives.

Testi di riferimento

•T.F. Fuller, J. N. Harb, Electrochemical Engineering,Wiley
Indications about reference texts (all available in the main libraries) will be done during the course. Papers and review articles will be also provided.

Codice insegnamento 91961

Electromagnetic Compatibility M 1° anno · Annuale · 6 CFU · ING-INF/02 · 0 file

The course will introduce the basics of electromagnetic signal propagation in an automotive environment where many different sources can influence and disturb its reliable transmission. Moreover, it will deal with the…

Scheda dell'insegnamento

Obiettivi formativi

The course will introduce the basics of electromagnetic signal propagation in an automotive environment where many different sources can influence and disturb its reliable transmission. Moreover, it will deal with the different aspects of electromagnetic compatibility of electronic circuits in complex environments. Filtering and shielding techniques for conducted and radiated disturbances will be discussed, along with conventional measurement methods and instrumentation. The students will learn the main electromagnetic wave propagation mechanisms, how to describe and recognize unwanted conducted and radiated emission and interferences, as well as the strategies to design electromagnetically reliable and robust circuits, in accordance with national and international EMC regulation and directives.

Programma

Module 1

  • Basics of electromagnetic wave propagation. Maxwell Equations and Wave Equation. Guided and free space propagation.
  • Quasi-stationary condition: low- and high-frequency systems/circuits.
  • Plane waves. Transmission and reflection for planar interfaces.
  • Transmission Lines: lumped element model. Reflection and Matching.
  • Fundamental of Antennas. Near field and far field regions. The Friis formula.
  • Main antenna parameters: radiation pattern, directivity, gain, loss, equivalent circuit, effective area. Practical wireless link characterization
  • Use of software tool for numerical characterization of main electromagnetic phenomena
    Module 2
  • Automotive Electromagnetic Compatibility: EMC Directives, test sites for measurements and conformity assessment procedures. Antennas for EMC.
  • The “Radio Energy Atmosphere” in the world of automotive. Signal spectra. Transmission lines and signal integrity.
  • Conducted emissions and susceptibility. Radiated emissions and susceptibility.
  • Crosstalk.
  • Shielding.

Modalità d'esame

Oral examination on the two modules, on both theoretical and practical topics object of the lectures.
The exam can be split in two parts (in different days): an oral part on the first module (approx. 20 minutes), and an oral part on the second module (approx. 20 minutes).
During each interview, the candidates are requested to explain some physical phenomena discussed in class. These explanations can be provided verbally or first written on paper and then discussed orally.
For students with learning disabilities (DSA) or temporary or permanent disabilities: it is recommended to contact the responsible university office in advance (https://site.unibo.it/studenti-con-disabilita-e-dsa/it): it will be their responsibility to propose any adjustments to the interested students, which must still be submitted, with a notice of 15 days, for the approval of the teacher, who will evaluate their appropriateness also in relation to the educational objectives of the course.

Testi di riferimento

Lectures slides
Robert. E. Collin, “Foundations for Microwave Engineering”, Wiley-IEEE Press
Robert. E. Collin, "Antennas and Radiowave Propagation", Mc Graw Hill
Clayton R. Paul, Introduction to Electromagnetic Compatibility, 2nd Ed., Wiley-Interscience, 2006. ISBN 0471755001

Codice insegnamento 37125

Energy Storage Systems and Control M I.C. 1° anno · 1° semestre · 0 file

In this course students: 1. Learn the fundamentals of cell electrochemistry, the materials characteristics and main issues related to the manufacturing process. 2. Classify the possible cell chemistry and technology in…

Scheda dell'insegnamento

Obiettivi formativi

In this course students: 1. Learn the fundamentals of cell electrochemistry, the materials characteristics and main issues related to the manufacturing process. 2. Classify the possible cell chemistry and technology in relation to the range of application in the automotive sector. 3. Learn modelling methodology for representing the cell output characteristic and the variability of cell parameters. 4. Understanding main issues related to the pack formation by series/parallel connection of cells. 5. Learn the sizing criteria for a battery pack. 6. Understand the most innovative electrochemical storage technology. 7. Learn the fundamental principle and sizing method for energy storage systems not based on electrochemical batteries: supercapacitors and flywheel.

Programma

l corso è diviso in due moduli tenuti da due diversi docenti:
Prof.ssa Francesca Soavi, Elettrochimica dei sistemi di conversione accumulo dell’energia, 3 CFU
Prof. Davide Pontara, Applicazione delle batterie nel trasporto, 3CFU
I docenti copriranno in maniera esaustiva e senza discontinuità il programma riportato qui sotto, per chiarezza, in maniera compatta.
Batterie a ioni di litio. Tecnologia
Reazioni elettrochimiche di base.
Proprietà chimico-fisiche e reattività dei diversi componenti: catodo, anodo, separatore e elettrolita.
Funzionamento, stabilità, sicurezza ed invecchiamento delle batterie litio-ione.
Caratteristiche degli elementi accessori: collettore, contenitore, sistemi di protezione.
Protocolli standard di caratterizzazione e di validazione.
Selezione della tecnologia per le diverse applicazioni (LIFePO4, Li-ossidi metallici).
Nuove tipologie di batterie, es. litio-aria.
Caratteristiche ed entità del settore produttivo delle batterie al litio e loro utilizzo.
Classificazione dei sistemi di accumulo in funzione di applicazione in ambito automobilistico (BEV, HEV, PHEV) e loro collocazione sul diagramma di Ragone.
Batterie a Ioni di litio. Modello
Modello semplificato ed accurato a parametri concentrati di una cella al litio.
Stima del livello di carica (SOC) di una batteria al litio.
Influenza di SOC, numero di cicli, temperatura, durata di vita sui parametri di cella.
Effetto della variabilità dei parametri sulla caratteristica esterna della cella.
Metodi di determinazione dei parametri di cella da prove sperimentali.
Valutazione prestazionale della cella al litio.
Limiti di funzionamento durante i processi di carica e scarica.
Pacco batteria e sistema di gestione batterie
Criteri di selezione della tensione ottimale del pacco.
Criteri di dimensionamento di pacchi batteria mediante connessione di celle in serie/parallelo.
Effetto della dispersione dei parametri di cella nella definizione delle condizioni di limitazione di carica e scarica.
Equalizzazione delle batterie.
Equalizzazione attiva e passiva.
Funzionalità richieste ad un sistema di gestione batteria (BMS) e interfacciamento con altri sistemi di conversione.
Architetture possibili per BMS
Controllo termico del pacco batteria.
Funzioni di sicurezza e normativa di riferimento nella gestione delle celle al lito.
Altri sistemi di accumulo.
Sistemi di accumulo ad elevata densità di potenza: supercondensatore, volano (KERS).
Caratteristiche generali, problematiche costruttive e di impiego. Modelli semplificati. Esempi di dimensionamento di sistemi per applicazione automobilistica.

Modalità d'esame

L'esame consiste in due prove, una per ciascun modulo. Il voto finale sarà la media della valutazione ottenuta dallo studente per i due moduli.
La prova finale è orale e mira a verificare, sulla base di due domande sui principali argomenti trattati e sulla presentazione e risultati dell’attività laboratoriale condotta dallo studente, sia l'acquisizione delle conoscenze previste dal programma del corso che la capacità dello studente di sapersi muovere all'interno degli argomenti trattati durante il corso.
Non sono previste prove intermedie
Elementi di giudizio utilizzati per l’attribuzione del voto: sarà valutata la capacità di discutere e analizzare criticamente l’argomento posto dal docente. Particolare attenzione verrà data all’ ordine espositivo e alla correttezza formale della discussione, ovvero l'uso corretto delle unità di misura e delle equazioni per la valutazione delle prestazioni dei dispositivi.
Studenti/sse con DSA o disabilità temporanee o permanenti: si raccomanda di contattare per tempo l’ufficio di Ateneo responsabile (https://site.unibo.it/studenti-con-disabilita-e-dsa/it): sarà sua cura proporre agli/lle studenti/sse interessati/e eventuali adattamenti, che dovranno comunque essere sottoposti, con un anticipo di 15 giorni, all’approvazione del/della docente, che ne valuterà l'opportunità anche in relazione agli obiettivi formativi dell'insegnamento”.

Testi di riferimento

•T.F. Fuller, J. N. Harb, Electrochemical Engineering,Wiley
A lezione verranno date indicazioni sui testi di riferimento, tutti disponibili nelle biblioteche. Verranno inoltre forniti articoli e review di supporto.

Codice insegnamento 99705

Hardware-Software Design of Iot Systems M 1° anno · 2° semestre · 6 CFU · ING-INF/01 · 0 file

The main goal of the class is to enable students to specify, configure, program and verify complex embedded electronic systems for the Internet of Things and for Artificial Intelligence. The importance of…

Scheda dell'insegnamento

Obiettivi formativi

The main goal of the class is to enable students to specify, configure, program and verify complex embedded electronic systems for the Internet of Things and for Artificial Intelligence. The importance of hardware-software interaction will be emphasized, as all practical IoT and AI systems are programmable. The class will provide working knowledge on state-of-the-art hardware platforms used in embedded AI and IoT applications - spanning a wide range of power and cost vs. performance tradeoffs. A detailed coverage will be given of software abstractions and methodologies for developing applications leveraging the capabilities of the above mentioned platforms. Design automation tools and flows will also be covered.

Programma

1. Introduction to Hardware/Software design and System-on-Chip Architectures. 2. Microcontroller systems design – Hardware and Software Microcontroller architecture based on the ARM Cortex M family and RISC-V. Microcontroller peripherals. Microcontroller programming for maximum Energy efficiency Analog and Digital sensor interfaces, MEMS sensors – Smart sensors – Wireless sensor interfacs. System power management 3. Parallel Architecture and Parallel programming for advanced embedded systems Multicore architectures and their use in energy efficient embedded Systems with examples from consumer and industrial market segments. Programming shared memory multicore systems using the OpenMP programming model – with practical examples based on open-source multicore RISC-V system (PULP platform)

Modalità d'esame

compulsory written exam ( and optional oral exam)

Testi di riferimento

Computer Architecture, A Quantitative Approach By John L. Hennessy, David A. Patterson and Christos Kozyrakis Edition 7 (or 6) Notes and online documentation shared during lectures

Codice insegnamento 93322

Power Electronic Converters M 1° anno · 2° semestre · 6 CFU · ING-IND/31 · 0 file

The course initially provides supplements of linear and non-linear electric circuits with special emphasis towards power electronic circuits for electric vehicles. The digital controllers for power electronic…

Scheda dell'insegnamento

Obiettivi formativi

The course initially provides supplements of linear and non-linear electric circuits with special emphasis towards power electronic circuits for electric vehicles. The digital controllers for power electronic converters are also examined, such as DSP boards, digital microcontrollers, FPGA systems. The main power electronic switches employed in the electric vehicles are introduced, such as power diodes, Mosfets, IGBTs, SiC and emerging power components. The considered converter configurations, and the corresponding modulation strategies, are: passive and active single-phase and three-phase rectifiers (vehicle power interface with the electric grid), three-phase inverters (vehicle motor drive), dc/dc choppers configurations (on board and off board battery chargers). Battery charging modes for electric vehicles are introduced and duscussed. The features Grid-to- Vehicle (G2V), Vehicle-to-Grid (V2G), Vehicle-to-Vehicle (V2V), Vehicle-to-Load (V2L), and Vehicle-for-Grid (V4G) are considered for the regulation of the power converters, with reference to both off board dc fast charging stations and onboard ac chargers.

Programma

Module I (30h)
Supplements of linear and non-linear electric circuits. Non sinusoidal periodic waveforms. Current and voltage harmonic distortion and powers in non-sinusoidal steady-state. Conduction and commutation losses. Power diodes and SCRs. Power electronic switches: BJT, MOSFET, IGBT, emerging components. Rectifiers: single-phase and three-phase. PFC single-phase and three-phase (Vienna Rectifier). Pulse width modulation (PWM). Choppers: buck, boost, buck-boost, Cùk, SEPIC, half-bridge, full bridge. Power factor correctors (PFC).
Module II (30h)
Single-phase inverters: half-bridge and full bridge. Unipolar and bipolar modulation. Three-phase inverters: square-wave (six-step), PWM. Common-mode signal injection: centered and discontinuous modulations. Space vector modulation (SVM). Multilevel inverters: cascaded H-bridge, Diode clamped (NPC), Flying capacitor. Four-wire inverters: split-capacitor inverter, four-leg inverter, independently controlled neutral module. Dual-Active-Bridge Converter. EV charging standards and considerations.

Modalità d'esame

Written and/or eventually oral exam (interview). Possibility of midterm written exams. A project report is required for Module 2 (more information available on Virtuale).
Students with SLD or temporary or permanent disabilities: it is recommended to contact the responsible University office in good time (https://site.unibo.it/studenti-con-disabilita-e-dsa/en): it will be their responsibility to propose any adaptations to the students concerned, which must however be submitted, 15 days in advance, to the approval of the teacher, who will evaluate the opportunity also in relation to the educational objectives of the course.

Testi di riferimento

Mohan, Undeland, Robbins: Power Electronics. J.Wiley & Sons Rashid: Power Electronics: Circuits Devices and Applications. Prentice Hall Kassakian, Schlecht, Verrghese: Principles of Power Electronics. MIT Addison-Wesley

Codice insegnamento 93736

Wireless Power Transfer for Sustainable Mobility M 1° anno · 2° semestre · 6 CFU · ING-INF/02 · 0 file

L'obiettivo del corso è fornire gli strumenti analitici, numerici e le competenze necessarie per il progetto d'interi sistemi di trasmissione di potenza wireless a dispositivi sia statici che in movimento, per diversi…

Scheda dell'insegnamento

Obiettivi formativi

L'obiettivo del corso è fornire gli strumenti analitici, numerici e le competenze necessarie per il progetto d'interi sistemi di trasmissione di potenza wireless a dispositivi sia statici che in movimento, per diversi valori di potenza e a diverse frequenze di lavoro. Il corso intende anche fornire le soluzioni progettuali idonee a garantire la compatibilità di tali sistemi in ambienti umanizzati. Si studiano le tecniche analitiche e numeriche per l'analisi ed il progetto di sistemi per la trasmissione wireless di potenza in campo vicino, verso dispositivi statici ed in movimento. Si affronta il progetto di diverse architetture, basate sia su accoppimento induttivo che capacitivo, a elementi singoli e multipli. Vengono inoltre analizzati e progettati i principali componenti circuitali per la trasmissione e la ricezione della potenza e le relative funzioni di merito. Vengono studiate le principali non linearità responsabili della conversione dell'energia, da RF a DC e viceversa, e gli strumenti CAD per il progetto dell'intero sistema. Sono previste attività sperimentali di laboratorio in cui verranno progettati e caratterizzati semplici sistemi rappresentativi per la trasmissione di potenza sia statica che dinamica e le loro principali caratteristiche.

Codice insegnamento B2362

Applied Superconductivity for Energy Transition M 2° anno · 2° semestre · 6 CFU · ING-IND/31 · 0 file

This course aims to illustrate the fundamental concepts related to the analysis and synthesis of magnetic systems and large-scale applications of superconductivity for the energy transition. The electrical and magnetic…

Scheda dell'insegnamento

Obiettivi formativi

This course aims to illustrate the fundamental concepts related to the analysis and synthesis of magnetic systems and large-scale applications of superconductivity for the energy transition. The electrical and magnetic properties that characterize the behavior of low and high critical temperature superconducting materials are introduced. The most relevant technological issues concerning electromagnetic, thermal (cryogenics) and mechanical aspects of superconducting devices are treated in the course. The working principles and design criteria of the main large-scale applications of superconductivity are described, with particular reference to magnet technology (controlled thermonuclear fusion machines, accelerators, magnetic resonance imaging systems, mag-netic levitation) and to the power systems (cables, electrical machines).

Programma

Magnet Technology and Engineering
Type I and type II superconducting materials.History and theories of superconductivity . Critical surface. High and low critical temperature materials. Last generation superconducting materials. Alternating current losses.
Magnetic field generating systems: permanent magnets, resistive electromagnets, superconducting eletromagnets.
Geometric configurations: Solenoid, toroidal, saddle, racetrack, cos (q), Bitter type electromagnets. Permanent magnets and Halbach arrays.
Winding methods: helix, pancake, double pancakes.
Type of conductors: LTS and HTS wires and tapes. Rutherford cables, Cable in Conduit Conductors (CICC), Roeble conductors, CORC.
Electromagnetics: magnetization of superconducting filaments, wires and cables.
Cryogens and cooling techniques. Helium phase diagram. Cooling methods. Conduction cooled (cryogen free) superconducting magnets.
Thermal Stability: Transition from superconducting to normal state (quench). Minimum Quench Energy (MQE) and Minumum Propagating Zone. Quench detection and protection systems.
Applications
Magnetic Resonance Imaging: Working Principle. Uniformity and intensity of the field, signal to noise ratio. Gradient coils. Stray field shielding.
Superconducting Magnets for Controlled Termonuclear Fusion: tokamak and stellarator configurations. Magnetic system for a tokamak: toroidal field magnets, central solenoid, corrector magnets. ITER project.
Magnets for Particle Accelerators: the CERN LHC Project. Field harmonics and the problems of field quality. Field errors due to geometry, non linearity of iron (saturation) and non-linearity of superconductors (magnetization). Dipoles, quadruples and correcting magnets. Magnets for the Particle Detectors.
High field magnets (above 30 T): Bitter magnets, non-distructive pulses, distructive pulses.
Power Applications
Superconductive AC and DC power cables.
Superconductive current limiters for power systems: resistive, inductive and hybrid limiters.
Superconducting Magnetic Energy Storage Systems (SMES): Operating principle, design criteria. Charge and discharge dynamics, ripple and protection systems. Superconducting permanent magnets for rotating electric machines: superconductive bulks, in situ or ex situ location magnetization. Torque density.
Magnetic separation: principle of operation. Open Gradient or High Gradient Configuration. Applications in the mining and steel industries.
Superconductive systems for induction heating in industrial environments.
Critical high-temperature superconducting cable design methods. Vacuum techniques and cryogenic systems.
Magnetic Levitation: Active and passive levitation. Trains MAGLEV. Magnetic bearings. Levitation stability.

Modalità d'esame

The exam will consist of an oral examination at the end of the course. No partial exams are foreseen during the course. During the oral examination the topic discussed during the course will be treated by the student. The examination will be aimed at assessing that the student is able to adopt a correct technical language and has reached an organic knowledge of the topics developed during the course. The ability of the student to apply the acquired knowledge to the solution of new problems will be verified. The final mark will depend on the degree of fulfilling of the aforementioned requisites.
Students with specific learning disorders (SLD) or temporary/permanent disabilities:
We recommend contacting the University Office responsible for support services in a timely manner (https://site.unibo.it/studenti-con-disabilita-e-dsa/it) [https://site.unibo.it/studenti-con-disabilita-e-dsa/it):] ). The office will evaluate the students' needs and, where appropriate, propose possible accommodations. These must in any case be submitted for approval at least 15 days in advance to the course instructor, who will assess their suitability also in relation to the learning objectives of the course.

Testi di riferimento

M. Wilson, “Superconducting Magnets”, Clarendon Press Oxford, New York, 1982 Kratz and Wyder, “Principles of pulsed magnet design”, Springer, 2002 G. Krabbes, G. Fuchs, W.-R. Canders, H. May, R. Palka, “High Temperature Superconductor Bulk Materials”, Wiley-VCH, 2006 Y. Iwasa, “Case Studies in Superconducting magnets”, Plenum Press, 1994 Thome and Tarrh, “MHD and Fusion Magnets”, J.Wyley, 1992. P. Tixador, “Les supraconducteurs”, Hermes, Paris, 1995.

Codice insegnamento 99549

Automotive Connectivity M 2° anno · 1° semestre · 3 CFU · ING-IND/15 · 0 file

The aim of the module is to provide the students with the fundamental knowledge to recognize and to utilize the main on board networks and protocols interacting with the driveline and the foundamental techniques for…

Scheda dell'insegnamento

Scheda dell'a.a. 2025/2026: quella dell'anno in corso non è ancora pubblicata.

Obiettivi formativi

The aim of the module is to provide the students with the fundamental knowledge to recognize and to utilize the main on board networks and protocols interacting with the driveline and the foundamental techniques for vehicle to internet interconnection. Students learn the principle of operation and use vehicular networking and protocols: 1) CAN vehicular network (characteristic, application, implementation); 2) UDS - Universal Diagnostic Service characteristic and implementation; 3) XCP – Universal calibration protocol. Students understand the basic features and application of the Vehicle to infrastructure networking: 1) Vehicle to Internet communication services (TCP/IP, etc…): 2) Data compression and data transmission. 3) DoIP: Diagnosis and service over the internet. 4) Edge and cloud computing for predictive maintenance. 5) Electric vehicle Fleet management. 6) Remote Battery Management System. Improvement of battery safety control and second life battery use.

Programma

The course covers fundamental and advanced principles of in-car and off-car vehicular networks, RTOS and middleware for data distribution, main security aspects related to vehicle communication and data management in vehicle communication scenarios. Topics include: - introduction to networking and protocols - in-car networking (protocols, ECU, software layers and RTOSes) - off-car communication (v2x protocols) - RTOSes and middleware for cyber-physical systems and real-time systems - safety and security aspects

Modalità d'esame

Students will be evaluated either through: - written exam (a test with open and closed questions) - presentation of project of a connected car (in conjunction with the module of vehicle conceptual design)

Testi di riferimento

Modifica Testi/Bibliografia Vehicular Networking, Cambridge University Press, 2014, ISBN 1107046718, 9781107046719 Vehicular Networks:From Theory to Practice, CRC Press, ISBN: 1420085891, 978142008589 Intelligent Vehicular Networks and Communications: Fundamentals, Elsevier Press, ISBN: 0128095466, 9780128095461 Research Papers, given in class Resources given in Class

Codice insegnamento 85740

Automotive Power Circuits and Electric Motor Design M I.C. 2° anno · 1° semestre · 0 file

Students learn the methodology and the use of design tools for developing and testing the main power electronic converters used in the automotive sector. Students learn the modelling techniques for FEM electromagnetic…

Scheda dell'insegnamento

Obiettivi formativi

Students learn the methodology and the use of design tools for developing and testing the main power electronic converters used in the automotive sector. Students learn the modelling techniques for FEM electromagnetic analysis of high frequency magnetic components and for modelling of mixed signal circuits. Students receive a complete technology review for power circuitry, passive components, active devices, cooling technologies, mixed signal circuits, sensors, control devices and control circuits. Students focus on the principle of operation and design of automotive related power converter topologies: PFC and Phase Shift Full Bridge for the On Board Charger (OBC), dual-level and multilevel three-phase inverter for the traction drive, flyback and LLC circuit for the on board auxiliary converters.

Programma

General introduction on power components and converters for high efficiency electrical energy conversion. Characterization and modeling of losses of power electronic devices. Thermal management. Main differences and applications of power electronic devices available on the market. Gate driver circuits. Technology review of passive component (capacitors and magnetics). PCB manufacturing, automated assembly and soldering of converters.
AC/DC conversion
Most common single phase and three phase Power Factor Corrector topologies, operating principle, loss calculation, DC-link design, input filter design, sensors, and control algorithms. Design validation through analytical and numerical approach.
DC/DC conversion
Most common non isolated and isolated topologies (Flyback, Push-Pull, Forward, Phase-Shifted Full Bridge, Resonant), operating principle, loss calculation, design of magnetics, sensors, and control algorithms. Design validation through analytical and numerical approach.
DC/AC conversion
Analysis of a complete three-phase traction inverter. Multiphase converters.
Laboratory experiences
The dynamic behavior of converters will be simulated by means of numerical software (LTSpice, Matlab/Simulink and PLECS). Measurements on real converters will be carried out during laboratory experiences.
A CAD software dedicated to electronic design will be used to draw the circuit diagrams and to design multilayer Printed Circuit Board (PCB) keeping into account electrical and physical constraints. A simple converter will be designed, fabricated, and tested.

Modalità d'esame

La verifica dell’apprendimento si svolge attraverso un esame articolato in due parti, finalizzato a valutare l’acquisizione delle conoscenze e delle competenze previste dal programma del corso.
La prima parte consiste nella presentazione e discussione del progetto di un convertitore elettronico di potenza, tenendo conto dei vincoli di progetto assegnati e delle caratteristiche dei dispositivi commercialmente disponibili.
La seconda parte consiste in un colloquio orale sugli argomenti teorici affrontati durante il corso.
La valutazione finale terrà conto della correttezza del progetto proposto e delle risposte teoriche, della capacità di motivare le scelte progettuali adottate, della chiarezza espositiva e dell’appropriatezza del linguaggio tecnico utilizzato.

Testi di riferimento

The in-depth study of some converters can be consulted in the following reference books:
Switching Power Supply Design - Abraham I. Pressman
Fundamentals of Power Electronics - Robert W. Erickson

Codice insegnamento 93739

Automotive Power Electronic Circuits Design M 2° anno · 1° semestre · 6 CFU · ING-IND/32 · 0 file

Students learn the methodology and the use of design tools for developing and testing the main power electronic converters used in the automotive sector. Students learn the modelling techniques for FEM electromagnetic…

Scheda dell'insegnamento

Obiettivi formativi

Students learn the methodology and the use of design tools for developing and testing the main power electronic converters used in the automotive sector. Students learn the modelling techniques for FEM electromagnetic analysis of high frequency magnetic components and for modelling of mixed signal circuits. Students receive a complete technology review for power circuitry, passive components, active devices, cooling technologies, mixed signal circuits, sensors, control devices and control circuits. Students focus on the principle of operation and design of automotive related power converter topologies: PFC and Phase Shift Full Bridge for the On Board Charger (OBC), dual-level and multilevel three-phase inverter for the traction drive, flyback and LLC circuit for the on board auxiliary converters.

Programma

General introduction on components and converters for high efficiency electrical energy conversion. Characterization and modeling of losses of power electronic devices. Thermal management. Main differences and applications of power electronic devices available on the market. Gate driver circuits. Technology review of passive component (capacitors and magnetics). PCB manufacturing, automated assembly and soldering of converters.
AC/DC conversion
Most common single phase and three phase Power Factor Corrector topologies, operating principle, loss calculation, DC-link design, input filter design, sensors, and control algorithms. Design validation through analytical and numerical approach.
DC/DC conversion
Most common non isolated and isolated topologies (Flyback, Push-Pull, Forward, Phase-Shifted Full Bridge, Resonant), operating principle, loss calculation, design of magnetics, sensors, and control algorithms. Design validation through analytical and numerical approach.
DC/AC conversion
Analysis of a complete three-phase traction inverter. Multiphase converters.
Laboratory experiences
The dynamic behavior of converters will be simulated by means of numerical software (LTSpice, Matlab/Simulink and PLECS). Measurements on real converters will be carried out during laboratory experiences.
A CAD software dedicated to electronic design will be used to draw the circuit diagrams and to design multilayer Printed Circuit Board (PCB) keeping into account electrical and physical constraints. A simple converter will be designed, fabricated, and tested.

Modalità d'esame

The assessment of learning is conducted through an exam consisting of two parts, aimed at evaluating the acquisition of the knowledge and skills outlined in the course program.
The first part consists of the presentation and discussion of the design of a power electronic converter, taking into account the specified design constraints and the characteristics of commercially available devices.
The second part consists of an oral examination covering the theoretical topics addressed during the course.
The final evaluation will consider the correctness of the proposed design and theoretical answers, the ability to justify the adopted design choices, the clarity of exposition, and the appropriateness of the technical language used.

Testi di riferimento

The in-depth study of some converters can be consulted in the following reference books:
Switching Power Supply Design - Abraham I. Pressman
Fundamentals of Power Electronics - Robert W. Erickson

Codice insegnamento 93740

Communication Systems: Theory and Measurement M 2° anno · 2° semestre · 6 CFU · ING-INF/03 · 0 file

At the end of the course the students acquire the knowledge and the ability to cope with modulation/demodulation techniques, signal processing and receiver architectures, measurement of spectra, signals and filter…

Scheda dell'insegnamento

Scheda ripresa da un altro corso di laurea dello stesso ateneo.

Obiettivi formativi

At the end of the course the students acquire the knowledge and the ability to cope with modulation/demodulation techniques, signal processing and receiver architectures, measurement of spectra, signals and filter design.

Programma

Module 1 - Prof. Alessandro Vanelli-Coralli Course Introduction and Communication Systems Overview
Introduction to the course: Objectives, structure, and learning outcomes Communication systems: wireless and wired communications; cellular communications; Non-Terrestrial Networks communications; The channel link capacity.
Communication Systems Fundamentals
Mathematical background for wireless systems: Real and complex Gaussian random variables. Rayleigh, exponential, and chi-square statistics. Real and complex Gaussian vectors. Basic matrix algebra, eigenvalue decomposition, and singular value decomposition (SVD). Digital communication fundamentals: PAM, sampling theorem, and reconstruction; Noise in Communication systems; Baseband vs. passband signals; Modulation and demodulation concepts, quadrature representation. ISI in bandlimited channels: Nyquist criterion, raised cosine filtering Link budget fundamentals: Path loss models, received power calculation Wireless channel: Wireless channel characteristics (free space propagation, path loss, shadowing, and multipath). Time and frequency selectivity (coherence time and bandwidth, Doppler spread and delay spread). Multipath propagation modeling (tapped delay line model, channel impulse response). Statistical channel models (Clarke model, Rayleigh fading, Jakes spectrum, and Rician fading)
Detection Theory Fundamentals
Introduction to detection theory: Hypothesis testing, Maximum A posteriori and Maximum Likelihood decision criteria in communications Examples and exercises: Binary detection problems
Optimal Transmission in Bandlimited Non-Selective AWGN Channels
Linear modulations: Signal space representation, constellation diagrams, and spectral characteristics Common modulation schemes: L-ASK, L-PSK, M-QAM analysis and comparison Optimal Receiver in AWGN: Matched filter and correlator Spectral and energy efficiency: Trade-offs and theoretical limits (Shannon capacity)
Transmission in the Presence of Channel Selectivity
Transmission in the presence of flat fading: Link budget criteria in the presence of fast and slow fading: outage probability and average probability of error. Optimal transmission in the presence of frequency selectivity: The MLSE receiver. Suboptimal schemes for adaptive equalization: linear equalizers.
Multiplexing and Multiple Access
Multiplexing and multiple access techniques OFDM principles: Orthogonality, cyclic prefix, and DFT implementation OFDM advantages and limitations: Frequency selective channels, Spectral efficiency, Complexity, Peak-to-average power ratio, synchronization sensitivity OFDM applications in 4G, 5G and 6G
Multi-Antenna Systems - Introduction
MIMO system definitions: Spatial diversity and multiplexing concepts SIMO systems: Maximal ratio combining (MRC) and selection diversity MISO systems: Transmit diversity and basic beamforming (Alamouti scheme) MIMO capacity: Brief introduction to spatial multiplexing gains
Module 2 – Prof. Gianni Pasolini
· Laboratory activity
Introduction to Matlab simulation software Design and implementation of functional blocks for the generation of modulated signals Design and implementation of functional blocks for the decoding of modulated signals Use of software defined radio devices

Modalità d'esame

The final assessment consists of a written test and an oral interview. Both the written test and the oral interview cover both modules and all of the subject introduced during the course.

Testi di riferimento

Slides and note of teh course will be made available during the courses
Suggested readings
D. Tse and P. Viswanath, "Fundamentals of Wireless Communications", Cambridge University Press, 2005. A. Goldsmith “Wireless Communications”, Cambridge University Press, 2005 J.Proakis, “Digital Communications”, Mc Graw Hill.

Codice insegnamento 35167

Electric Motor Design M 2° anno · 1° semestre · 6 CFU · ING-IND/32 · 0 file

The aims of the Course are to train the students to the specific knowledge regarding the traditional methodologies for the analaysis and the design of the electrical machines. Furthermore, the appropriate use of…

Scheda dell'insegnamento

Obiettivi formativi

The aims of the Course are to train the students to the specific knowledge regarding the traditional methodologies for the analaysis and the design of the electrical machines. Furthermore, the appropriate use of simulation software and thermal and electromagnetic field analysis will be presented and discussed. Special attention is paid to the design of brushless machines, with reference to different topology employed in the automotive sector for both traction in BEV and in HEV and for auxiliary drives (EPS,HVAC, fans).

Programma

General consideration on the design of electric motors. Nameplate data and parameters involved in the design of the electric motors.
Electrical Engineering Materials
Conducting materials, Insulating materials, Soft magnetic materials (Laminations, Composites), Permanent magnets.
Losses in electric motor materials and temperature effects.
Cooling of electric motors
Thermal conduction, convection, and radiation. Equivalent thermal networks, temperature rise, types of duties and ratings.
Finite Element Analysis of electric motors
Introduction to the use of Finite Element software for the analysis of electric motor design.
Induction motors
Design equations for a.c. machines. Leakage reactance of a.c windings with coil- and bar-type. Equivalent circuit and parameter calculation of squirrel cage motors.
Design calculations, effects of the parameter design selection. Free and restricted design. Samples of design calculation.
Design validation via analytical and numerical approach.
Brushless rotating machines
Design relationships for surface mounted permanent magnet machines.
Basic design choices, cogging torque reduction, fractional slot windings, demagnetization.
Design validation via analytical and numerical approach, effects of non-linear materials.

Modalità d'esame

The exam includes both project development and an oral test.
The examination consists in the presentation and discussion of a report of design procedures for specific motors, following the methodology studied during the course.
The exam evaluation concerns the fulfillment of the motor requirements, the electromagnetic validation through finite element analysis, and the justification of the design choices made and the methodology used.
Students with Specific Learning Disabilities (SLD) or temporary or permanent disabilities: It is recommended to contact the responsible University office in advance (https://site.unibo.it/studenti-con-disabilita-e-dsa/en). The office will propose any necessary adjustments to the interested students, which must, however, be submitted to the approval of the instructor at least 15 days in advance. The instructor will assess their suitability, considering the educational objectives of the course.

Testi di riferimento

The pdf files of the slides utilized during the lessons are indispensable and sufficient for the preparation for the exam.
To master and deepen the knowledge of electric drives the following books can be taken into consideration:
J. Pyrhonen, T. Jokinen, V. Hrabovcova: Design of Rotating Electrical Machines, John Wiley & Sons, Great Britain.
J. F. Gieras, M. Wing: Permanent Magnet Motor Technology. Marcel Dekker, Inc., New York, Basel.

Codice insegnamento 93741

Final Examination 2° anno · 3 CFU · 0 file

La prova finale consiste nella presentazione di una tesi redatta in lingua inglese e corredata di un sommario in lingua inglese. Lo studente discuterà il lavoro svolto di fronte alla Commissione di Laurea Magistrale.

Scheda dell'insegnamento

Obiettivi formativi

La prova finale consiste nella presentazione di una tesi redatta in lingua inglese e corredata di un sommario in lingua inglese. Lo studente discuterà il lavoro svolto di fronte alla Commissione di Laurea Magistrale.

Codice insegnamento 86301

Final Examination If you select this activity, it means that you intend to write a thesis for which your continuous presence (in Unibo premises or at external companies/institutions) is NOT requested. 2° anno · 24 CFU · 0 file

After completion of the dissertation students should be able to: - show evidence of a critical and holistic knowledge and have a deeper understanding of a specific topic concerning their chosen subject area; - understand…

Scheda dell'insegnamento

Obiettivi formativi

After completion of the dissertation students should be able to: - show evidence of a critical and holistic knowledge and have a deeper understanding of a specific topic concerning their chosen subject area; - understand the relationships between the theoretical concepts taught in class and their application, justifying the selective and critical use of material, data and interdisciplinary approaches adopted; - show evidence of ability to plan and manage a project within deadlines

Codice insegnamento 60750

INTERNET OF THINGS M 2° anno · 1° semestre · 6 CFU · ING-INF/03 · 0 file

This course introduces wireless communications for the Internet of Things (IoT). The course will describe the most used wireless technologies enabling the deployment of IoT networks. The theoretical part of the course…

Scheda dell'insegnamento

Obiettivi formativi

This course introduces wireless communications for the Internet of Things (IoT). The course will describe the most used wireless technologies enabling the deployment of IoT networks. The theoretical part of the course will provide to students skills for designing an IoT network, accounting for connectivity, medium access control layer and routing issues, while considering the propagation environment where the network is located. Laboratory activities will allow students to use wireless devices to setup and run small IoT networks in a realistic environment and study their performance.

Programma

The course is divided into three parts: 1) Theoretical part; 2) Laboratory sessions; 3) Seminars on case studies.
In the first part (approx. 25 hours) lectures will be dedicated to present IoT protocols to be used at the different layers, which are physical, medium access control (MAC), network and application layers. Main focus will be on MAC and network layer protocols, where some guidelines for the design will be given.
In the laboratory sessions (approx. 25 hours, starting from middle Oct.) is concerned students will have possibility to program MC1322 Freescale 802.15.4-compliant devices in order to setup a real IoT network. On one hand, the laboratory activities will consist in the observation of the network behavior (e.g., network formation, data transmission, etc.) and measurement of some performance metrics (e.g., throughput and delays). On the other hand, students will have the opportunity to implement their own applications and measure performance metrics when considering different parameter settings.
The third part (approx. 10 hours) seminars, dealing with some research hot topics and applications, like smart city, smart buildings and smart manufacturing, will be presented.
Prerequisites: it is requested students have knowledge of basic aspects of Telecommunications. In particular, basics concepts on spectrum analysis, modulations, thermal noise, performance of pass-band systems, basics of antennas and propagations in wireless medium.

Modalità d'esame

The exam will be composed of: 1) one open book (notes available) written part, including exercises on PHY and MAC layers (result: passed/borderline/not passed); 2) oral exam. In case the result of the written part is borderline, the oral is composed of: i) one question on the written part (PHY and MAC layers); ii) one question on the second part of the course, that is network and application layers; iii) 10 minutes presentation (with power point slides) on the laboratory activity. In case the result of the written part is passed, question i) above is skipped.
The presentation of the lab activity could be based on: i) one of the activity performed in Lab1 during the course and the related measurement results OR ii) a project invented, devised and implemented by the students. The latter project could be performed in group of maximum 3 people.
The final mark will be based on the performance achieved during the oral exam. The mark at the oral is derived as follows: starting from 30 and decreasing at each wrong reply. Laude is considered only for students presenting projects (option ii above) for the lab activity.
Students with specific learning disorders (SLD) or temporary/permanent disabilities:
We recommend contacting the University Office responsible for support services in a timely manner (https://site.unibo.it/studenti-con-disabilita-e-dsa/en ). The office will evaluate the students' needs and, where appropriate, propose possible accommodations. These must in any case be submitted for approval at least 15 days in advance to the course instructor, who will assess their suitability also in relation to the learning objectives of the course.

Testi di riferimento

Slidesets and material made available by the instructor.
Suggested book for students without background on telecommunications signal and systems: A. Bruce Carlson, "Communication Systems: An Introduction to Signals and Noise in Electrical Communication", ed. by Mcraw-Hill International Editions. The following Sections are those useful to follow the course: 2.1, 2.2, 2.3, 3.1, 3.2, 3.3, 5.1, 5.2, 5.3. Send an email to Prof. Buratti to requested the book.
Slides of the course will be available on VIRTUALE.

Codice insegnamento B8397

Instrumentation for Electrical Engineering M 2° anno · 2° semestre · 6 CFU · ING-INF/07 · 0 file

The course aims to provide students of the Master's Degree in Electrical Engineering with the knowledge inherent the types of instruments (both stand-alone and virtual instruments) and measurement systems used for the…

Scheda dell'insegnamento

Obiettivi formativi

The course aims to provide students of the Master's Degree in Electrical Engineering with the knowledge inherent the types of instruments (both stand-alone and virtual instruments) and measurement systems used for the measurements, diagnostics and characterization of components and systems in the electric engineering sector. The topics covered include the instrumentation operating principle, the internal architecture (with reference to the input signals conditioning circuits), the sensors and probes, the main communication protocols used for the transmission of remote measurements, the criteria for a correct choice of the most suitable instrument depending on the application, as well as an in-depth part relating to their correct use, with particular reference to the evaluation of measurement uncertainty.

Programma

Introduction to the course
Current and Voltage Sensors
Introduction Sensors for Smart Grids Inductive ITs LPCT: Rogowski Coil LPCT: Shunt LPVT: Voltage Divider
Measurements for Power Quality
Introduction Origin of Power Quality Variations Processing of Stationary Signals Processing of NON Stationary Signals
Phasor Measurement Unit
Introduction Definition of PMU Architecture of the PMU Compliance tests for PMUs
Communication in power systems
Objectives of the Smart Grid Communication Network Elements of Communication Networking Conventional Applications Smart Grid Applications Communication Network Architecture
Energy Meters
Introduction Electromechanical Energy Meter Electronic Meter Smart Energy Meter Standards
Digital Twin
Introduction Digital Twin Digital Twin and Power Systems

Modalità d'esame

Oral examination. Three questions covering the entire course (lab included).

Testi di riferimento

Each topic of the course is provided with specific references.

Codice insegnamento 87231

Internship Abroad for Preparation of the Final Examination If you select this activity, you intend to enter a competition for international mobility (e.g. Thesis Abroad, Erasmus+, etc.) or to start an internship by applying on SOL – Internship (to know mo 2° anno · 1° semestre · 21 CFU · 0 file

The student - is able to identify high-quality, coherent career opportunities - is able to use advanced tools and innovative techniques in professional settings, and to transfer knowledge and competences to novel work…

Scheda dell'insegnamento

Scheda dell'a.a. 2025/2026: quella dell'anno in corso non è ancora pubblicata.

Obiettivi formativi

The student - is able to identify high-quality, coherent career opportunities - is able to use advanced tools and innovative techniques in professional settings, and to transfer knowledge and competences to novel work environments, evaluating the results achieved during the preparation of the final exam.

Programma

Students can carry out their internship outside of Italy following one of the possibilities listed below: by participating in an international mobility programme, such as: Erasmus+ Mobility for Traineeship, grants for preparing the dissertation abroad; see also Internships abroad with international mobility programmes; by contacting a company/institution located abroad, and following the passages explained here. This internship allows the student to gain the first 12 credits associated with the final dissertation. To this end, (at least) 300 hours of activities (max. 360 hours) have to be conducted by the student in the company. Such activities have to be consistent with the project shared with the teacher who will play the role of thesis supervisor and the tutor within the company. Once agreed the topic of the final dissertation with the thesis supervisor and the external tutor, the student has to ask to add this type of internship to their career. Requests can be sent to the Internship office anytime, despite the 2 periods scheduled to change study plans; a specific form is needed (see https://corsi.unibo.it/2cycle/StatisticalSciences/internships). Once this request has been accepted, the student's study plan will be modified as follows: - the Master Thesis will be removed; - the following activities will be inserted: 84551 Internship abroad for Preparation of the Final Examination (12 cfu); Final Examination. Once the internship activities have been completed, the student must continue with the project agreed with the thesis supervisor in order to obtain the credits associated with the activity Final Examination. For more information see https://corsi.unibo.it/2cycle/StatisticalSciences/internships

Codice insegnamento 84551

Internship for Preparation for the Final Examination If you select this activity, you intend to start an internship by applying on SOL – Internship (to know more go on your degree course’s website > homepage > studying>internship for the preparation of th 2° anno · 1° semestre · 21 CFU · 0 file
LABORATORY OF ELECTRICAL INSULATION SYSTEM M 2° anno · 1° semestre · 3 CFU · 0 file

After completing the course, the student knows the specific features of different materials and insulation systems. For each equipment used in transport electrification, the student understands the choices leading to the…

Scheda dell'insegnamento

Obiettivi formativi

After completing the course, the student knows the specific features of different materials and insulation systems. For each equipment used in transport electrification, the student understands the choices leading to the selection of a specific insulation system on the basis of the equipment stress and utilization profiles. The student is thus autonomous in developing electrical insulation systems for novel applications. The student is also able to plan and execute tests to demonstrate the quality of insulation systems. The student will also be able to test and diagnose complete equipment. ha il menu contestuale.

Programma

The course introduces the materials and insulation systems used in electrical machines, including turn-to-turn, phase-to-phase and phase-to-ground insulation, wire enamels, slot liners, phase separators and impregnation resins. The properties of thermoplastic and thermosetting materials, glass transition, cross-linking and thermal classification are reviewed. Polarization, conduction, permittivity, dielectric losses, surface and volume resistivity, and the relevant measurement techniques are examined. The course covers breakdown mechanisms and the statistical analysis of breakdown data using the Weibull distribution, as well as thermal, electrical and multifactor ageing, Arrhenius models and the limitations of accelerated testing. Particular attention is devoted to stresses produced by PWM and SiC converters, including rise time, overvoltage, ringing, reflected waves, common-mode voltage and electric-field distribution in windings. The origin and measurement of partial discharges under AC and repetitive impulse voltage are then addressed, together with Type I and Type II insulation systems and the effects of voltage waveforms, gas gaps and direct oil cooling. Laboratory activities include dielectric-property measurements, breakdown tests with Weibull analysis, and partial-discharge measurements, including PDIV and PDEV determination and comparison between sinusoidal and PWM excitation.

Modalità d'esame

Oral examination

Testi di riferimento

Slides provided by the teacher

Codice insegnamento B8299

Laboratory of Business Plan M 2° anno · 1° semestre · 3 CFU · IEGE-01/A · 0 file

Al termine dell'insegnamento, lo studente è in grado di: - Riconoscere e valutare le opportunità imprenditoriali - Valutare la desiderabilità e fattibilità di una idea di business - Redigere e presentare un business plan…

Scheda dell'insegnamento

Scheda dell'a.a. 2025/2026: quella dell'anno in corso non è ancora pubblicata.

Obiettivi formativi

Al termine dell'insegnamento, lo studente è in grado di: - Riconoscere e valutare le opportunità imprenditoriali - Valutare la desiderabilità e fattibilità di una idea di business - Redigere e presentare un business plan per la creazione di una nuova impresa - Analizzare, utilizzando la prospettiva dell'investitore, imprese di recente formazione - Capire come finanziare una nuova impresa.

Programma

The course focuses on the development of entrepreneurial behaviours in a variety of settings. In particular, it presents the fundamentals of developing an effective business plan, teaching the basic principles of developing plans for the sales, marketing, product or service operations, financials and management of a new venture. It assumes some prior knowledge of the subject area and will equip students with much of the knowledge required to launch and manage a high potential new venture.

Modalità d'esame

Assessment will be based on a team coursework (up to 5 students per team). Each team will be assessed on: i. A final written business plan of 5,000 words plus exhibits (70% of the coursework) ii. A 10-minute presentation (max 12 slides), followed by a 7-minute questions and answers (30% of the coursework)

Testi di riferimento

The following textbook is needed for a clear comprehension of the topics presented during the course: Preparing Effective Business Plans: An entrepreneurial approach. Bruce Barringer, 2014, Pearson New International Edition, 1st Edition, ISBN-13: 978-1-292-03991-6 Alongside this textbook, a series of slides, case studies, problems and exercises will also be presented throughout the course.

Codice insegnamento 78858

Modeling and Simulation of Mechatronic Systems M 2° anno · Annuale · 9 CFU · ING-INF/04 · 0 file

The course provides the basics for the analysis of modern power systems/smart grids in steady state and transient/dynamic conditions. At the end of the course, students - know the main technical aspects of electric power…

Scheda dell'insegnamento

Obiettivi formativi

The course provides the basics for the analysis of modern power systems/smart grids in steady state and transient/dynamic conditions. At the end of the course, students - know the main technical aspects of electric power transmission networks; - can carry out power flows calculations, fault analysis, assessment of angular, voltage, and frequency stability; - can analyze the electromagnetic transients in the lines.

Programma

The course aims at providing a general framework, and a set of methodologies and tools for the design of mechatronic systems. The main “theoretical” topics deal with
(Physical) Modelling of dynamical systems, Numerical simulation, Mono- and multi-objective optimisation techniques.
Beside several examples discusses during the classes, compulsory projects are proposed to let the students apply on real world case studies the techniques presented during the lectures.
In brief, for each key topic, the main contents are the following:
Multi-port systems and bond graphs Basic components models System models in several domains Multi-port fields and junctions Advanced modelling techniques
Causality analysis Introduction to 20-sim Setting up a simulation for different domains
Basic theory, with examples System design via optimisation

Modalità d'esame

The exam is oral and consists of two main parts. In the first one, the student's knowledges about the first part of the course, i.e. the "theory", are verified, while in the second one the student has to illustrate the project carried out in the second part of the course.
Students with SLD, or temporary or permanent disabilities: we recommento to contact the University office (https://site.unibo.it/studenti-con-disabilita-e-dsa/it) in advance: it will be its responsibility to propose any adjustments to the interested students, which must however be submitted, with 15 days' notice, for approval by the teacher, who will evaluate the appropriateness also in relation to the educational objectives of the teaching.

Testi di riferimento

System Dynamics: Modeling, Simulation, and Control of Mechatronic Systems D.C. Karnopp, D.L. Margolis, R.C. Rosenberg John Wiley & Sons, 2012
Mechatronic Systems: Fundamentals R. Isermann Springer-Verlag London, 2005 ISBN 978-1-85233-930-2
Mechatronics by Bond Graphs: An Object Oriented Approach to Modelling and Simulation V. Damic, J. Montgomery Springer Science & Business Media, 2015 ISBN 978-3-662-49002-0
Multiobjective Optimization: Principles and Case Studies Y. Collette, P. Siarry Springer Science & Business Media, 2004 ISBN 978-3-540-40182-7
20-sim documentation

Codice insegnamento 92993

Optical Technologies for Electrical Engineering M 2° anno · 1° semestre · 6 CFU · ING-INF/02 · 0 file

At the end of the course the student knows the basic characteristics of the Optical Technologies which are mainly utilized in the area of Electrical Engineering. Starting from a physically-based point of view, and taking…

Scheda dell'insegnamento

Obiettivi formativi

At the end of the course the student knows the basic characteristics of the Optical Technologies which are mainly utilized in the area of Electrical Engineering. Starting from a physically-based point of view, and taking advantage of some laboratory experiences, he/she deeply understands how the peculiar features of these Technologies are exploited within Electrical Systems and Smart Grids, for Communications, Monitoring and Sensing applications.

Programma

Module 1
Characteristics of Optical Fiber Systems in view of Electrical Engineering Applications
The Optical Fiber and its properties. Silica and Plastic optical Fibers. Optical Fiber as Transmission Channel for Telecommunications and as Distributed Sensor for Monitoring. Aspects of the Transmission of the Electromagnetic Field in Optical Fiber systems Optical Transmitters, Receivers and Components. General properties and required characteristics for Electrical Engineering applications. System Design Considerations. Digital and Analog Optical Fiber systems. Topologies utilized in Telecommunication scenarios which can be adopted within Smart Grid contexts.
Module 2
Introduction of Optical Technologies in Electrical Engineering Systems and Subsystems
Smart Grid Monitoring and Control through Optical Fiber Systems. Advantages over other possible communication technologies (e.g. Power Line, Wireless, Digital Subscriber Line). The IEC 61850 Standard. Examples of Supervisory Control and Data Acquisition Systems exploiting the Optical infrastructure. The Generic Object Oriented Substation Event (GOOSE) model. Fiber optics sensors in Power Grids. Quantities to be monitored and sensing technologies utilized. Optical Time and Frequency Domain Reflectometry for Optical Fiber System monitoring Transmission of Electrical Power through Optical Fiber Systems: the Power over Fiber (PoF) technique Technical Characteristics and advantages of the PoF technique. Examples of distribution of the electrical power through the PoF technique within applicative scenarios

Modalità d'esame

The exam will consist in a written part which must be passed in order to attend to a subsequent oral part.
The written parts aims to check the capability of the student to solve numerical exercises, regarding the different parts of the program, of the kind that are solved in class during the course. The result of the written part will be a "judgement": insufficient/sufficient/fair/good/very good.
Aim of the oral part is to integrate the judgement coming from the written part, taking into account the capability of the student to explain the concepts in a clear manner, and his effective understanding of the program contents.
The final level of preparation of the student will be expressed by a score (min: 18, max: 30 cum laude)
Students with Special Learning Disorders (SLD) or temporary or permanent disabilities: it is recommended to contact the responsible University office in good time (https://site.unibo.it/studenti-con-disabilita-e-dsa/it): it will be their responsibility to propose any adaptations to the students concerned, which must however be submitted, 15 days in advance, to the approval of the teacher, who will evaluate the opportunity also in relation to the educational objectives of the course.

Testi di riferimento

Lecture Notes given by the Teacher

Codice insegnamento 93038

Preparation for the Final Examination Abroad If you select this activity, you intend to enter a competition for international mobility (e.g. Thesis Abroad, Erasmus+, etc.). You will agree with your thesis supervisor the company/institution who will host y 2° anno · 1° semestre · 21 CFU · 0 file

The student - is able to personally organize and manage his/her own personal dissertation project abroad, with the supervisor’s support. The project will be normally financed by a specific grant. - is able to find both…

Scheda dell'insegnamento

Scheda ripresa da un altro corso di laurea dello stesso ateneo.

Obiettivi formativi

The student - is able to personally organize and manage his/her own personal dissertation project abroad, with the supervisor’s support. The project will be normally financed by a specific grant. - is able to find both oral and written documentation, especially for those fields where information and sources are not to be found in Italy, but are essential for the fullfilment of the dissertation/final examination research project.

Programma

For those students who will opt for the preparation of the final thesis abroad, the final exam will be divided into two parts: the final exam itself and the preparation of the final thesis abroad. Thus, the student's study plan will be modified as follows:

  • the Master Thesis will be removed; - the following activities will be inserted:
    84548 Preparation for the Final Examination Abroad (12 cfu); Final Examination.
    To go abroad and work on the final thesis, students are required to do research on a subject shared with the Unibo teacher who will play the role of thesis supervisor and an external researcher based abroad. Once the research activities abroad have been completed, the student must continue with the project agreed with the thesis supervisor in order to obtain the credits associated with the activity Final Examination.
    Study grants for dissertations abroad for Unibo students at the Department of Statistical Sciences are regularly provided. For more information on these grants see https://corsi.unibo.it/2cycle/StatisticalSciences/study-grant-for-dissertations-abroad

Codice insegnamento 84548

Product Safety, Product Liability and Automotive M Offered by the University of Modena and Reggio Emilia 2° anno · 6 CFU · IUS/01 · 0 file

The main purpose of the course is to provide students with a thorough knowledge of the core concepts of tort law in the automotive industry issues not only from a national perspective but also from the perspective of the…

Scheda dell'insegnamento

Scheda dell'a.a. 2025/2026: quella dell'anno in corso non è ancora pubblicata.

Obiettivi formativi

The main purpose of the course is to provide students with a thorough knowledge of the core concepts of tort law in the automotive industry issues not only from a national perspective but also from the perspective of the harmonization of European Union Law and the US legal system. The course aims at providing the student with a general knowledge of basic principles and concepts of European Union and US tort law and consumer protection law focused on the automotive industry issues. It also focuses on Corporate social responsibility and environmental and technological innovation issues that the automotive industry faces. Using the method of the economic analysis of law, the current UE and US legal system will be evaluated in the light of a pragmatic proposal to check that the basic liability law can still function properly in the light of rapid changes to some of the products that it covers. The attention will focuses on the new issues arising from highly automated vehicles. In this prospective it will be investigated the role of the precautionary principle governing the UE consumer protection law, and the risks development doctrine which can be seen as a limit to the manufacturer liability. The automotive litigation prospective also leads to focus the attention on class action and punitive damages which play a crucial role in the American legal system and are not still implemented in UE legal system. At the end of the course the student is expected to become familiar with the legal notions of producer, consumer, tort law, damage, product liability law and product safety law governing the automotive industry, in order to observe the problem of the automotive litigation in a globalized prospective. At the end of the course the student is expected to become familiar with the legal notions of producer, consumer, tort law, damage, product liability law and product safety law governing the automotive industry, in order to observe the problem of the automotive litigation in a globalized prospective.

Programma

The main purpose of the course is to enable students to efficiently handle the law fundamental issues involved in car manufacturing. The course will focus on the UE and US legislation framework upon product liability law and product safety law. In a second phase the course will focus on the case law study having regard to the liability issues on the automotive sector. The analysis of the legal system will be conducted in a comparative prospective between EU/US current regulation, with a particular focus on the economic analysis of the law. I - INTRODUCTION TO PRIVATE LAW PRIVATE LAW PRINCIPLES TORT LAW PRINCIPLES II -PRODUCT SAFETY AND PRODUCT LIABILITY IN THE UE LEGAL SYSTEM: • The Directives 85/374/ECC and 2024/2853/UE; • The concept of “defective product”: • Design defect • Manufacturing defect • Warning defect • Product safety and quality • The general product safety directive 2001/95/EC; • The concepts of safe” and “unsafe” products; • Authorities involved in the harmonization and in the definition of harmonized European standards • The withdrawal; • The recall; • The duty to warn; III - PRODUCT SAFETY AND PRODUCT LIABILITY IN THE US LEGAL SYSTEM • The uniform federal product safety standards; • Agencies involved in the definition of harmonized standards on product safety; • The concept of “defective product”: • Design defect • Manufacturing defect • Warning defect IV - AUTOMOTIVE AND PRIVATE LAW • Car manufacturing, car circulation and the problem of the cost of the accidents • The road safety and the car safety • The Crashworthiness doctrine in US • The role of National Highway Traffic Safety Administration (NHTSA) • The NHTSA safety standards • The UE safety standards • Vehicle’s safety and manufacturer liability in UE and US • The manufacturer liability • The liability of the manufacturer of a specific component • The designer liability V - HIGHLY AUTOMATED VEHICLES, CONNECTED VEHICLES AND AUTONOMOUS DRIVING CARS • The legal aspects between existing laws, the role of the jurisprudence and the perspectives of a reform. • Ethic issues arising from automated vehicles and the role of the law The law making process in UE • The ERTRAC Working Group’s Automated Driving Roadmap • The common EU approach to liability rules and insurance for connected and autonomous vehicles • The law making process in US - New Federal Guidance for Automated Driving Systems (ADS) • The first cases of accidents caused by highly automated vehicles.

Modalità d'esame

The final assessment is based on a written exam Students with specific learning disorders (SLD) or temporary/permanent disabilities: We recommend contacting the University Office responsible for support services in a timely manner (https://site.unibo.it/studenti-con-disabilita-e-dsa/it) [https://site.unibo.it/studenti-con-disabilita-e-dsa/it):] ). The office will evaluate the students' needs and, where appropriate, propose possible accommodations. These must in any case be submitted for approval at least 15 days in advance to the course instructor, who will assess their suitability also in relation to the learning objectives of the course.

Testi di riferimento

The materials will consist in papers drafted by the Professor and a selection of laws, regulations, documents and cases loaded on the University's website

Codice insegnamento 85752

Test, Diagnosis and Reliability M 2° anno · 1° semestre · 6 CFU · ING-INF/01 · 0 file

The course will first address the problem of fault modeling, with reference to the automotive environment, to then study testing, design for testability and hardware in the loop approaches. Then, onboard monitoring and…

Scheda dell'insegnamento

Obiettivi formativi

The course will first address the problem of fault modeling, with reference to the automotive environment, to then study testing, design for testability and hardware in the loop approaches. Then, onboard monitoring and diagnosis will be addressed, to finally study fault tolerant techniques for reliable systems’ design. The course will include laboratory experiences, and possible seminars given by experts in the field from the industrial world.

Programma

Course contents
Introduction to Digital Circuit and Systems' Testing
Definitions and motivations Position within the VLSI process Yield and production cost of an IC Some example of testing process: Characterization Testing; Manufacturing Testing; Burn-in; Incoming Inspection
Fault Models
Stuck-At Faults (SAs): Basics on Testing for SAs Fault Equivalence and Fault Collapsing Checkpoint Theorem Fault Dominance and Fault Collapsing Stuck-Open Faults: Possible Testing Stuck-On Faults: Possible Testing Bridging Faults, Delay Faulrts, Crosstalk Faults and Transient Faults: Possible Testing
Automatic Test Pattern Generation (ATPG)
Definition ATPG Algebras Exhaustive Algorithms Random Algorithms Path Sensitization Fault Coverage and Test Efficiency
Automatic Test Equipment (ATE)
Components and Specification Cost
Fault Diagnosis
Definitions and Motivations Fault Dictionary Diagnostic Tree
Design for Testability (DFT) Techniques and Hardware in the Loop Approaches
Introduction Ad-Hoc and Structural Methods Full Scan Partial Scan Boundary Scan Built-In-Self Test (BIST) Built-In-Logic-Block-Observer (BILBO) Hardware in the loop approaches
Fault-Tolerant Techniques
Introduction: Motivations; Applications Modular Redundancy: Basic Strategy; Voter Design and Reliability; Common Mode Failures; Diagnosis of Faulty Modules On-Line Testing and Recovery: Duplication and Comparison; Self Checking Circuits Self-Checking Circuits: Properties; Fault Hypothesis; Design of Self Checking Functional Blocks; Design of Checkers; Error Indicators Error Detecting Codes: Berger Codes (Theory and Checker Design); Parity Codes (Theory and Checker Design); m-out-of-n Codes (Theory and Checker Design) Recovery Techniques: Roll Back and Retry; Reconfiguration Error Correcting Codes: Introduction to Linear Parity Check Codes; Single Error Correction Hamming Codes; Single Error Correction/Double Error Detection Hsiao Codes; Encoding and Decoding Circuits
The course includes practice sessions in laboratories on:
Electrical level simulations of resistive bridging faults, crosstalk faults and transient faults, and analysis of their effects in some circuits of interest Design of basic components usually employed in high reliability systems and their prototyping by means of FPGA

Modalità d'esame

Oral examination. Questions will cover any topic addressed in class and in the laboratory. Specific questions may follow aimed at verifying the understanding of specific issues inherent to the topics covered in the course. The final grade will be formulated based on the answers provided to the asked questions.

Testi di riferimento

J. Segura C. F. Hawkins, “CMOS Electronics – How It Works, How It Fails” IEEE Press – Wiley, 2004.
M. L. Bushnell, V. D. Agrawal, “Essential of Electronic Testing”, Kluwer Academic Publishers, 2000
M. Abramovici, M. A. Bruer, A. D. Friedman, “Digital Systems Testing and Testable Design”, Computer Science Press, 1990
S. Mourad, Y. Zorian, “Principles of Testing Electronic Systems”, Essential of Electronic Testing”,Wiley, 2000
N. K. Jha, S. Kundu, “Testing and Reliable Design of CMOS Circuits”, Kluwer Academic Publishers, 1990
P. K. Lala, “Self-Checking and Fault Tolerant Digital Design”, Morgan Caufmann Publ, 2001

Codice insegnamento 85734

Vehicle Conceptual Design M 2° anno · 1° semestre · 3 CFU · ING-IND/15 · 0 file

Lectures aim at technically describing the overall layout, architecture and main functional systems of an Electric Vehicle (EV). The goal is the transmission of an integrated approach to the comprehension and design…

Scheda dell'insegnamento

Scheda dell'a.a. 2025/2026: quella dell'anno in corso non è ancora pubblicata.

Obiettivi formativi

Lectures aim at technically describing the overall layout, architecture and main functional systems of an Electric Vehicle (EV). The goal is the transmission of an integrated approach to the comprehension and design synthesis of EVs. Main contents are: definition of the architecture of a vehicle; Design activity flow: task clarification, conceptual design, embodiment design, detail design; historical evolution; graphic representation systems; body work (Body in White; Body Side; Fenders; Roof assembly; Front frame; Rear frame; compartment floor; closed bodies; spider, coupe and cabrio); body components (outer body components, weather strips, glass and mirrors, movable parts, windshield wiper, vehicle lighting and signalling); body interiors (restraint systems - safety belts; restraint system -- air-bag; dashboard cockpit - dashboard - console; interior trims; seats; air conditioning system).

Programma

I contenuti saranno pubblicati a breve dal docente a cui verrà attribuita la titolarità dell’insegnamento al termine delle procedure in corso

Codice insegnamento 93743

Vehicle Design and Connectivity M I.C. 2° anno · 1° semestre · IIND-03/B · 0 file

Lectures aim at technically describing the overall layout, architecture and main functional systems of an Electric Vehicle (EV). The goal is the transmission of an integrated approach to the comprehension and design…

Scheda dell'insegnamento

Scheda dell'a.a. 2025/2026: quella dell'anno in corso non è ancora pubblicata.

Obiettivi formativi

Lectures aim at technically describing the overall layout, architecture and main functional systems of an Electric Vehicle (EV). The goal is the transmission of an integrated approach to the comprehension and design synthesis of EVs. Main contents are: definition of the architecture of a vehicle; Design activity flow: task clarification, conceptual design, embodiment design, detail design; historical evolution; graphic representation systems; body work (Body in White; Body Side; Fenders; Roof assembly; Front frame; Rear frame; compartment floor; closed bodies; spider, coupe and cabrio); body components (outer body components, weather strips, glass and mirrors, movable parts, windshield wiper, vehicle lighting and signalling); body interiors (restraint systems - safety belts; restraint system -- air-bag; dashboard cockpit - dashboard - console; interior trims; seats; air conditioning system).

Programma

I contenuti saranno pubblicati a breve dal docente a cui verrà attribuita la titolarità dell’insegnamento al termine delle procedure in corso

Codice insegnamento 93742

Vehicle Energetics and HVAC Systems M 2° anno · 1° semestre · 6 CFU · ING-IND/10 · 0 file

The main aspects of vehicle climate control systems for automotive engineering are explored, with a special focus to electric vehicle applications. A thorough up-to-date knowledge of current A/C systems, with the…

Scheda dell'insegnamento

Obiettivi formativi

The main aspects of vehicle climate control systems for automotive engineering are explored, with a special focus to electric vehicle applications. A thorough up-to-date knowledge of current A/C systems, with the common used refrigerants and the new possible replacement systems, the electronic and electrical controls are enlightened. Recent approaches to optimise the interaction between cabin vehicle climate control system and electronic and electric devices cooling system are shown.

Programma

Vehicle enegetics - basis
The energy consumption of electric vehicles is explored, with a focus to the appliances energy demand. The car performances and the aerodynamics are included in the analysis, by including the climate change influence.
Energy balance in HVAC systems
Thermal Loads and Comfort conditions: thermophysical properties of vehicle components (thermal transmittance, thermal bridges, thermal inertia, solar transmission). Energy balance of the vehicle. Calculation of winter and summer thermal loads. Basic concepts on Thermal Comfort: subjective and objective indices.
Battery cooling
Lithium-ion battery cells. Principle of battery behavior from the thermal management point of view. Modeling of the thermal behavior of batteries. Comparison of dfferent battery cooling approaches: air cooling, liquid cooling, and new appoaches based on metal foams and Phase Change Materials (PCM).
Dynamic approach
Simulation techniques of the dynamic behavior of HVAC system in combination of the battery thermal management. Development of ad hoc lumped parameter approaches based on matlab.
Energy Life Cycle Assessment (LCA)
Basis of the LCA of electric vehicles in comparison with internal combustion vehicles. Application to some examples.

Modalità d'esame

The assessment consists of the presentation and discussion of a group project. The project must address a topic related to the subjects covered during the course (vehicle energetics, HVAC systems, battery thermal management, dynamic simulation, and Life Cycle Assessment) and should demonstrate the group's ability to independently develop an original and creative engineering solution based on the concepts and methodologies introduced in the course.
During the oral presentation, each student will be required to demonstrate their individual contribution to the project, their understanding of the underlying theoretical and methodological aspects, and their ability to critically discuss and justify the engineering choices adopted.
The final mark is expressed on a 30-point scale and is based on the overall quality of both the project and the oral discussion. The assessment will take into account:
the correctness, completeness, and scientific rigor of the technical content; the ability to apply the concepts and methods presented in the course to the development of innovative engineering solutions; the degree of autonomy, creativity, and originality demonstrated in the project; the ability to critically analyze and justify the proposed design choices; the clarity of the presentation, the appropriate use of technical terminology, and the ability to answer questions during the discussion.
These assessment criteria are fully aligned with the intended learning outcomes of the course, which aim to develop both theoretical knowledge and practical engineering skills, as well as independent judgment, problem-solving abilities, creativity, and teamwork in the field of vehicle energetics and HVAC systems.
The use of generative Artificial Intelligence (AI) tools is permitted only as a support for literature review, information analysis, and the organization of project materials. Students remain fully responsible for the originality, accuracy, and scientific quality of the submitted work. During the discussion, each student must demonstrate a thorough understanding of the project and the ability to independently explain and justify the adopted methodologies and engineering decisions.

Testi di riferimento

Automotive Air Conditioning - Optimization, Control and Diagnosis. Quansheng Zhang, Shengbo Eben Li, Kun Deng. Springer 2016.

Codice insegnamento 93733

Applied Superconductivity for Energy Transition M - Not available for the year 2025/2026 2° semestre · 6 CFU · ING-IND/31 · 0 file
Automotive Power Circuits and Electric Motor Design M I.C. - Not available for the year 2025/2026 1° semestre · 0 file
Final Examination - Not available for the year 2025/2026 3 CFU · 0 file
Final Examination - Not available for the year 2025/2026 If you select this activity, it means that you intend to write a thesis for which your continuous presence (in Unibo premises or at external companies/institutions) is NOT requested. 24 CFU · 0 file
INTERNET OF THINGS M - Not available for the year 2025/2026 1° semestre · 6 CFU · ING-INF/03 · 0 file
Instrumentation for Electrical Engineering M - Not available for the year 2025/2026 2° semestre · 6 CFU · ING-INF/07 · 0 file
Internship Abroad for Preparation of the Final Examination - Not available for the year 2025/2026 If you select this activity, you intend to enter a competition for international mobility (e.g. Thesis Abroad, Erasmus+, etc.) or to start an internship by a 1° semestre · 21 CFU · 0 file
Internship for Preparation for the Final Examination - Not available for the year 2025/2026 If you select this activity, you intend to start an internship by applying on SOL – Internship (to know more go on your degree course’s website > homepage > studyi 1° semestre · 21 CFU · 0 file
LABORATORY OF ELECTRICAL INSULATION SYSTEM M - Not available for the year 2025/2026 1° semestre · 3 CFU · 0 file
Laboratory of Business Plan M - Not available for the year 2025/2026 1° semestre · 3 CFU · 0 file
Modeling and Simulation of Mechatronic Systems M - Not available for the year 2025/2026 Annuale · 9 CFU · ING-INF/04 · 0 file
Optical Technologies for Electrical Engineering M - Not available for the year 2025/2026 1° semestre · 6 CFU · ING-INF/02 · 0 file
Preparation for the Final Examination Abroad - Not available for the year 2025/2026 If you select this activity, you intend to enter a competition for international mobility (e.g. Thesis Abroad, Erasmus+, etc.). You will agree with your thesis supervisor 1° semestre · 21 CFU · 0 file
Product Safety, Product Liability and Automotive M - Not available for the year 2025/2026 Offered by the University of Modena and Reggio Emilia 6 CFU · IUS/01 · 0 file
Test, Diagnosis and Reliability M - Not available for the year 2025/2026 1° semestre · 6 CFU · ING-INF/01 · 0 file
Vehicle Design and Connectivity M I.C. - Not available for the year 2025/2026 1° semestre · 0 file
Vehicle Energetics and HVAC Systems M - Not available for the year 2025/2026 1° semestre · 6 CFU · ING-IND/10 · 0 file

Recensioni del corso

Studi qui? Accedi per lasciare la tua recensione e aiutare altri studenti a scegliere.

★

Nessuna recensione per ora — e la prima è la più preziosa. Condividi la tua esperienza e orienta le future matricole.