Design Methods for Industrial Engineering
1° anno · 1° semestre · 6 CFU · ING-IND/15 · 0 file
At the end of the integrated course, the student can plan and manage the conceptual and structural design of products and systems, optimizing components and architectures while considering material behavior, fracture…
Scheda dell'insegnamento
Obiettivi formativi
At the end of the integrated course, the student can plan and manage the conceptual and structural design of products and systems, optimizing components and architectures while considering material behavior, fracture mechanics, and sustainability. The student can apply virtual and physical prototyping methods throughout the product development cycle to evaluate design alternatives and support informed engineering decisions. In this module, the student learns to plan and manage the conceptual design phase and the early prototyping of products and systems. Conceptual design methods are taught as techniques used to optimize products, find critical elements, identify proper design alternatives and strategies, and define the product architecture. Moreover, the student learns the main features of virtual and physical prototyping technologies and how to use and integrate them in the product development cycle and in the product lifecycle.
Programma
The course is divided into two parts. Part I regards Methods for Conceptual Design of Industrial Products, including systematic design, User eXperience design and Design for Manufacturing and Assembly. Part II focuses on Technologies for prototyping of products and systems, including advanced 3D modelling, Digital Mock ups, Virtual and Augmented Reality for immersive and interactive visualization.
PART I – METHODS FOR CONCEPTUAL DESIGN
Product planning Conceptual design for industrial products Product development process, Sustainable Product Design, User-centred Design, Design for X Identification of customer's needs and product specifications Concept generation and concept selection methods Functional decomposition and Product Architecture definition Design for Sustainability / Manufacturing and Assembly
PART II – PROTPTYPING TECHNIQUES
- Industrial Prototyping for product development • Advanced 3D Modelling • Surface modelling • Virtual Prototyping • Extended Reality (Virtual, Augmented and Mixed Reality)
Modalità d'esame
Students will be divided into teams of 4 students each and will develop a collaborative project work.
During the course intermediate individual or group assignments and deadlines will be given.
For each exam session the group will have to:
- Have completed all the intermediate assignments within the deadline
- Fill in a written test on VIRTUAL about the basic concepts of the course
- Deliver on the project work material (report + CAD files + other material such as pictures or videos) before the exam session
- Perform a 20-30 minutes group presentation of the project in Power Point on the day of the exam session
Testi di riferimento
Lecture slides and tutorials / material provided on Virtuale (virtuale.unibo.it)
Lecture notes will be provided soon before or after the class. Do not download lecture notes from previous years. These may not be update.
Ulrich K.T., Eppinger S. D. “Product Design and Development“ Mc Graw Hill.
Codice insegnamento B2371
Electric Energy Conversion
1° anno · 2° semestre · 6 CFU · ING-IND/32 · 0 file
The course delivers the principles of electromechanical energy conversion and suitable skills for the analysis of the main electrical machines for residential and industrial applications, along with the principles of…
Scheda dell'insegnamento
Obiettivi formativi
The course delivers the principles of electromechanical energy conversion and suitable skills for the analysis of the main electrical machines for residential and industrial applications, along with the principles of power electronics devices and basic architectures.
Programma
The course provides the fundamental knowledge required to understand power electronic converters and electromechanical energy conversion systems used in modern electrical drives. It is divided into two main parts: the first part introduces the principles, devices and converter topologies of power electronics; the second part focuses on the conversion of electrical energy into mechanical energy through different types of electric machines, including their operating characteristics and basic control strategies.
Basic knowledge of electrical circuits, electromagnetism and three-phase electrical systems is recommended.
The course is organized as follows.
Part I – Power Electronics
This part introduces the semiconductor devices and converter topologies used to control and convert electrical power in electrical drive systems.
Fundamentals of semiconductor physics
Basic principles of semiconductor materials. Energy bands, charge carriers and elementary conduction mechanisms. Relationship between semiconductor properties and the operation of power electronic devices.
Power semiconductor devices
Operating principles and characteristics of the main power semiconductor devices used in converters:
power diodes, for rectification and protection functions; Silicon-Controlled Rectifiers, SCRs, for controlled rectification and AC/DC conversion; Insulated Gate Bipolar Transistors, IGBTs, for high-efficiency switching applications in power converters and drives.
AC/DC converters
Single-phase and three-phase rectifiers. Operating principles, output voltage characteristics and typical applications in low-power and industrial power conversion systems.
DC/DC converters
Basic DC/DC conversion principles, with particular reference to the buck converter as a step-down topology for efficient DC voltage regulation.
DC/AC converters and inverters
Half-bridge and full-bridge inverter topologies. Single-phase and three-phase inverters. Generation of AC voltages from a DC source and role of inverters in AC motor drives.
Modulation techniques
Pulse Width Modulation, PWM, for the control of power converters. Use of PWM techniques to regulate power delivery and synthesize AC voltages from a DC source in electrical drive applications.
Part II – Electromechanical Energy Conversion
This part focuses on the interaction between electrical systems and mechanical motion, with reference to the principles of energy conversion and the operating behaviour of the main types of electrical machines.
Principles of electromechanical energy conversion
Fundamental principles of electromechanical energy conversion. Force and torque production, energy flow, losses and efficiency in electrical machines and drive systems.
DC machines
Dynamic equations of DC machines, including armature and field circuits. Steady-state characteristics and speed control methods.
The following topics are covered:
armature control, based on voltage variation for speed regulation at constant field; field control and field-weakening operation for extended speed range; constant-torque and constant-power operating regions; regenerative and dynamic braking; single-, two- and four-quadrant operation; torque and power operating modes in low-speed and high-speed drive applications.
Synchronous machines
Magnetic circuit analysis of synchronous machines, including stator and rotor field interactions. Machine equations, torque production and steady-state operating characteristics.
d-axis and q-axis reactance models; electromagnetic torque and machine equations; voltage regulation, load angle and stability in steady-state operation; open-loop voltage source inverter drives for synchronous machines; typical applications in propulsion systems, power generation and variable-speed drives.
Brushless DC machines, BLDC
Structure and operating principles of Brushless DC machines. Analysis of machines with trapezoidal back-EMF and electronic commutation.
construction features and rotor position dependence; trapezoidal back-EMF and phase current waveforms; electromagnetic torque production; six-step operation with two phases supplied at a time; commutation sequences as a function of rotor position; switching transients and torque ripple; block diagram of the BLDC drive; typical applications in variable-speed drives and motion control systems.
Induction machines
Steady-state modelling of induction machines using the equivalent circuit. Torque production, rotor dynamics and performance analysis.
torque-speed characteristics, slip and efficiency; starting methods, including direct-on-line, soft-start and star-delta starting; scalar V/f control strategy; constant terminal volts/hertz operation for flux regulation; low-frequency operation and compensation issues; current-controlled PWM inverter with slip-frequency control; constant-power operating region for variable-speed drive applications.
Single-phase induction motors
Structure and operating principles of single-phase induction motors. Analysis of the main construction types and of the methods used to produce the starting torque.
construction features and operating principles; equivalent magnetic field interpretation; starting torque production; capacitor-start motors; capacitor-start and run motors; permanent split capacitor motors; split-phase motors; shaded-pole motors; typical applications in low-power drive systems.
The course links the theoretical analysis of converters and electrical machines with their use in practical drive systems, highlighting the role of power electronics in the control, regulation and operation of electromechanical energy conversion systems.
Modalità d'esame
Student learning is assessed through a written examination
The assessment of learning is based on a written examination, designed to evaluate the acquisition of the knowledge and skills outlined in the course syllabus.
The written examination consists of:
7 true/false questions; 1 numerical exercise; 2 open-ended questions.
During the examination, the student’s ability will be assessed with reference to the following aspects:
correct use of the tools and concepts related to electrical engineering and electromechanical energy conversion; clear and accurate description of the operating principles of static power converters and electrical machines; effective representation of the fundamental principles governing the operation of electrical machines; ability to apply theoretical concepts to simple numerical and application-oriented problems.
The final grade will reflect the correctness and completeness of the answers, the student’s ability to present concepts clearly, the degree of independent reasoning, and the appropriate use of technical language.
Testi di riferimento
PDF files of the slides used during the lectures can be downloaded from the University of Bologna Virtuale platform.
The following books are recommended as reference texts for studying and further exploring the topics covered in the course:
A.E. Fitzgerald, C. Kingsley, S.D. Umans, Electric Machinery, McGraw-Hill. M. Rashid, Power Electronics Handbook, Butterworth-Heinemann. N. Mohan, T. Undeland, W. Robbins, Power Electronics: Converters, Applications and Design, John Wiley & Sons Inc.
For exam preparation, students should refer primarily to the lecture slides and teaching materials made available through Virtuale. The books listed above are intended as supporting references and sources for further study on specific course topics.
Codice insegnamento B2377
Engineering Design (I.C.)
1° anno · 1° semestre · 0 file
At the end of the integrated course, the student can plan and manage the conceptual and structural design of products and systems, optimizing components and architectures while considering material behavior, fracture…
Scheda dell'insegnamento
Obiettivi formativi
At the end of the integrated course, the student can plan and manage the conceptual and structural design of products and systems, optimizing components and architectures while considering material behavior, fracture mechanics, and sustainability. The student can apply virtual and physical prototyping methods throughout the product development cycle to evaluate design alternatives and support informed engineering decisions. In this module the students acquire in-depth knowledge of the methods and instruments necessary for the optimal structural design of mechanical components, plates, shells and pressure vessels. They deepen their knowledge of engineering materials' nonlinear behaviour and fracture mechanics. They learn the principles of the design for sustainability.
Programma
1. Richiami di Meccanica dei Solidi e Teoria dell’Elasticità
Concetti fondamentali di tensione e deformazione Stato monoassiale e triassiale di tensione Leggi costitutive elastiche lineari (Hooke) Moduli elastici e relazioni tra costanti elastiche Ipotesi di linearità e principio di sovrapposizione Stati piani di tensione e deformazione Effetti dei carichi termici e vincoli
2. Trasformazioni di tensione e criteri locali
Trasformazione delle tensioni Cerchio di Mohr Tensioni principali e massima tensione di taglio Direzioni principali Applicazioni a problemi bidimensionali
3. Equazioni di equilibrio e compatibilità
Equazioni differenziali di equilibrio Forze di volume e condizioni al contorno Equazioni di compatibilità in campo elastico Relazione tra equilibrio, compatibilità e leggi costitutive Indipendenza della distribuzione di tensione dal materiale (casi particolari)
4. Funzione di Airy e soluzioni bidimensionali
Introduzione alla funzione di Airy Equazione biarmonica Soluzioni polinomiali Applicazioni a domini rettangolari Collegamento con il principio di De Saint-Venant
5. Soluzioni in coordinate polari
Formulazione delle equazioni di equilibrio in coordinate polari Stati di tensione assialsimmetrici Soluzione di Lamé per cilindri spessi Effetto di fori in piastre (soluzione di Kirsch) Flessione di travi curve
6. Piastre sottili: flessione e carichi trasversali
Ipotesi di Kirchhoff–Love Relazione momento–curvatura Flessione in una e due direzioni Piastre rettangolari sotto carichi distribuiti Soluzioni di Navier Effetti termici nelle piastre
7. Piastre circolari
Formulazione assialsimmetrica Soluzioni in forma chiusa Piastre con carichi concentrati e distribuiti Piastre con foro Applicazioni a scambiatori e piastre rinforzate
8. Gusci sottili e recipienti in pressione
Teoria a membrana dei gusci sottili Gusci cilindrici e sferici Recipienti in pressione con fondi sferici ed ellittici Effetti flessionali locali Discontinuità geometriche e di spessore
9. Flange e componenti di collegamento
Azioni trasmesse dalle flange Stato di tensione nelle flange Modelli semplificati e ipotesi geometriche Collegamento tubo–flangia
10. Plasticità dei materiali
Modelli costitutivi elastoplastici Materiale elastico–perfettamente plastico Incrudimento isotropo e cinematico Effetto Bauschinger Comportamento ciclico dei materiali
11. Fatica a basso e alto numero di cicli
Curve di Wöhler e Manson–Coffin Influenza della tensione media Regole di Goodman, Smith, Morrow Plasticizzazione ciclica Stima della vita a fatica
12. Fatica sotto spettri di carico reali
Carichi variabili nel tempo Metodi di conteggio dei cicli (Rainflow) Regola di Miner e sue limitazioni Spettri accelerati di prova Applicazioni ingegneristiche reali
13. Meccanica della Frattura Elastica Lineare (LEFM)
Motivazioni e criteri di progetto Approccio energetico (Griffith, Irwin) Fattore di intensità degli sforzi (SIF) Zona plastica all’apice della cricca Tenacità alla frattura
14. Propagazione di cricche a fatica
Meccanismi di crescita delle cricche Legge di Paris e modelli avanzati Influenza del rapporto di carico R Stabilità della cricca Filosofie di progetto: safe-life, fail-safe, damage tolerant
15. Metodo degli Elementi Finiti (FEM)
Introduzione al FEM e ruolo nella progettazione Formulazione variazionale (energia potenziale) Metodi di Rayleigh–Ritz e Galerkin Elementi monodimensionali (aste, travi, telai) Sistemi di coordinate locali e globali Elementi bidimensionali (triangolari e quadrilateri) Integrazione numerica (Gauss) Post-processing: spostamenti, deformazioni, tensioni Convergenza, accuratezza, locking e interpretazione critica dei risultati
Modalità d'esame
Esame scritto sulla parte relativa a piastre e gusci, Esame al computer sulla parte di teoria, presentazione orale di un tema a piacere. La prima prova verifica la capacità di impostare problemi relativi a quel tipo di strutture, la prova al computer serve a verificare le conoscenze, mentre la prova orale ha lo scopo di verificare le capacità di esposizione.
In conformità al Codice Etico di Ateneo, si richiama l’attenzione degli studenti sull’obbligo di adottare comportamenti improntati alla massima correttezza.
È vietata qualsiasi attività che possa compromettere il regolare svolgimento delle prove d’esame, a titolo esemplificativo e non esaustivo:
copiatura e plagio; accesso a risorse didattiche online; utilizzo di strumenti di intelligenza artificiale non espressamente autorizzati; uso o possesso di materiale o strumentazione non consentiti.
Si precisa che il solo possesso di strumenti o materiali non autorizzati durante lo svolgimento di qualunque prova comporta l’annullamento immediato dell’elaborato e la segnalazione agli uffici competenti.
I comportamenti in violazione di quanto sopra potranno dar luogo a procedimenti disciplinari e, qualora rivestano rilievo penale, a segnalazioni alle autorità competenti, con il conseguente rischio di avvio di procedimenti penali a carico degli studenti coinvolti.
Testi di riferimento
Machine design for stuctural integrity
F. Cesari, G. Minak. Clueb 2026
ISBN 978-88-491-5855-7
Metal Fatigue in Engineering, 2nd Edition
Ralph I. Stephens , Ali Fatemi , Henry O. Fuchs
Wiley
ISBN: 978-0-471-51059-8
Theory Of Elasticity
Stephen P. Timoshenko J.N. Goodier
Editore: Mcgraw-hill Education - Europe
ISBN: 0070858055
Codice insegnamento B2369
Machine Design
1° anno · 1° semestre · 6 CFU · ING-IND/14 · 0 file
At the end of the integrated course, the student can plan and manage the conceptual and structural design of products and systems, optimizing components and architectures while considering material behavior, fracture…
Scheda dell'insegnamento
Obiettivi formativi
At the end of the integrated course, the student can plan and manage the conceptual and structural design of products and systems, optimizing components and architectures while considering material behavior, fracture mechanics, and sustainability. The student can apply virtual and physical prototyping methods throughout the product development cycle to evaluate design alternatives and support informed engineering decisions. In this module the students acquire in-depth knowledge of the methods and instruments necessary for the optimal structural design of mechanical components, plates, shells and pressure vessels. They deepen their knowledge of engineering materials' nonlinear behaviour and fracture mechanics. They learn the principles of the design for sustainability.
Programma
1. Fundamentals of Solid Mechanics and Elasticity
Stress and strain definitions Uniaxial and multiaxial stress states Linear elastic constitutive laws Elastic constants and material behavior Superposition principle Plane stress and plane strain Thermal loading effects
2. Stress Transformation
Stress transformation equations Mohr’s circle Principal stresses and maximum shear stress Principal directions Applications to 2D stress states
3. Equilibrium and Compatibility Equations
Differential equilibrium equations Body forces and boundary conditions Compatibility conditions Constitutive–equilibrium relationships Material independence in special cases
4. Airy Stress Function
Introduction to Airy stress function Biharmonic equation Polynomial solutions Applications to 2D domains Relation to Saint-Venant principle
5. Elasticity in Polar Coordinates
Polar formulation of equilibrium equations Axisymmetric stress states Lamé solution for thick cylinders Stress concentration around holes (Kirsch solution) Curved beam bending
6. Thin Plates: Bending and Transverse Loads
Kirchhoff–Love plate theory Moment–curvature relations One- and two-directional bending Rectangular plates under transverse loads Navier solutions Thermal effects in plates
7. Circular Plates
Axisymmetric formulation Closed-form solutions Concentrated and distributed loads Plates with holes Engineering applications
8. Thin Shells and Pressure Vessels
Membrane theory of shells Cylindrical and spherical shells Pressure vessels with domes Local bending effects Geometrical and thickness discontinuities
9. Flanges and Coupling Elements
Load transmission through flanges Stress state in flanges Simplified analytical models Pipe–flange connections
10. Plasticity of Materials
Elastoplastic constitutive models Perfect plasticity Isotropic and kinematic hardening Bauschinger effect Cyclic material behavior
11. Low- and High-Cycle Fatigue
Wöhler and Manson–Coffin curves Mean stress effects Goodman, Smith and Morrow criteria Cyclic plasticity Fatigue life estimation
12. Fatigue under Variable Amplitude Loading
Real loading spectra Cycle counting methods (Rainflow) Miner’s rule and limitations Accelerated testing spectra Engineering applications
13. Linear Elastic Fracture Mechanics (LEFM)
Design motivation and criteria Energy approach (Griffith, Irwin) Stress Intensity Factor (SIF) Crack-tip plastic zone Fracture toughness
14. Fatigue Crack Propagation
Crack growth mechanisms Paris law and advanced models Load ratio effects Crack stability Design philosophies: safe-life, fail-safe, damage tolerance
15. Finite Element Method (FEM)
FEM fundamentals and role in design Variational formulation Rayleigh–Ritz and Galerkin methods One-dimensional elements Local and global coordinate systems Two-dimensional elements Numerical integration (Gauss) Post-processing of results Convergence, accuracy and locking phenomena
Modalità d'esame
Written exam on the part relating to plates and shells, computer based knowledge test and ora presentation. The first test tests the ability to set up problems relating to that type of structures, the computer based test is used to evaluate the knowledge, while the oral test aims to investigate presentation capabilities.
In accordance with the University Code of Ethics (Codice Etico di Ateneo), students’ attention is drawn to the obligation to adopt conduct based on the highest standards of integrity. Any activity that may compromise the proper conduct of examinations is prohibited, including but not limited to:
- cheating and plagiarism; • access to online learning resources; • use of artificial intelligence tools not expressly authorized; • use or possession of unauthorized materials or equipment.
It is specified that the mere possession of unauthorized tools or materialsduring the conduct of any examination results in the immediate invalidation of the submitted work and notification to the competent offices.
Any conduct in violation of the above provisions may result in disciplinary proceedings and, where criminal relevance applies, reports to the competent authorities, with the consequent risk of criminal proceedings being initiated against the students involved.
Testi di riferimento
Machine design for stuctural integrity
F. Cesari, G. Minak. Clueb 2026
ISBN 978-88-491-5855-7
Metal Fatigue in Engineering, 2nd Edition
Ralph I. Stephens , Ali Fatemi , Henry O. Fuchs
Wiley
ISBN: 978-0-471-51059-8
Theory Of Elasticity
Stephen P. Timoshenko J.N. Goodier
Editore: Mcgraw-hill Education - Europe
ISBN: 0070858055
Codice insegnamento B2370
Machines and Sustainable Energy Systems
1° anno · 1° semestre · 9 CFU · ING-IND/08 · 0 file
The student is able to face the design of modern energy systems (combined groups, cogeneration groups) for the production of electricity and refrigeration cycles (compression, absorption, air). He is also able to deal…
Scheda dell'insegnamento
Obiettivi formativi
The student is able to face the design of modern energy systems (combined groups, cogeneration groups) for the production of electricity and refrigeration cycles (compression, absorption, air). He is also able to deal with the fluid-dynamic design of the compressible turbomachines. Finally, the student acquires the basic knowledge on systems for the production of electricity and heat from renewable sources.
Programma
ENERGY SISTEMS
-WORLD energy panorama
-COMBINED CYCLE POWER PLANTS (CCPP) or GAS-STEAM CYCLES: Overall performance, 1 pressure level without and with reheating, 2 pressure levels, optimization of the flow rate spilled from the low-pressure liquid separator (steam drum), 3 pressure levels (lay-out only), T-S diagram and heat exchange diagram T-q
-COGENERATION: POWER AND ENERGY EVALUATION INDEXES, Cogeneration: gas turbine, with back pressure steam turbine and with condensing steam turbine. Cogeneration in Combined Cyle Power Plant.
-WIND ENERGY: Betz – Lancaster limit
-SOLAR ENERGY: Thermal (production of hot water for sanitary purposes). Photovoltaic: production of electricity through the use of semiconductors. Thermodynamic: thermal energy is used to evaporate oils/salts, which then expand in a turbine producing electricity.
-GEOTHERMAL ENERGY: Hydrothermal plants. Dominant water cycle: Ambient discharge, Condensation. Dominant steam cyle: Flash steam cycle, Binary cycle. HYBRID geothermal cycles: Gas turbine systems, Steam power systems with spilled steam.
-FUEL CELLS: Introduction, Working principle, PEM
Hydrogen: Energy vector, Properties, Storage. Production: types of hydrogen. Comparison versus methane.
FLUID MACHINES
-Isentropic and polytropic compression and expansion efficiencies -FLUID MACHINES:
-Definition
-Classification
-TURBO-MACHINES
-RADIAL flow
-AXIAL flow
-MIXED flow
-STAGE of a TURBO-MACHINE
-NAVIER-STOKES equations for the study of the flow and simplifications
-Fundamental equations for turbo-machines: Perfect gas, Real gas, State functions, Thermodynamic transformations.
-MASS CONSERVATION PRINCIPLE
-ENERGY CONSERVATION PRINCIPLE: CLOSED system, OPEN system
-WORK ACCORDING TO EULER IN TURBOMACHINES:
-DIRECT formulation: FIXED and MOBILE (RELATIVE) observer, Potential (gravitational, centrifugal) and Potential Energy, Rothalpy
-INDIRECT formulation or WORK to the DIFFERENCE of KINETIC ENERGIES
-GAS DYNAMIC
-MACH number
-Coupling of equations of motion (mass, energy, momentum)
-1D COMPRESSIBLE MOTION IN THE DUCT
-PROPAGATION OF ACOUSTIC WAVES
-Speed of SOUND
-ISENTROPIC FLOW IN A CONSTANT SECTION DUCT: PARAMETRIZATION OF THE EQUATIONS AS A FUNCTION OF THE MACH NUMBER
-TOTAL quantities
-ISENTROPIC FLOW IN A VARIABLE SECTION DUCT: Nozzle and Diffuser
-SOLUTION OF THE ISOENTROPIC FLOW IN A PURELY CONVERGENT DUCT
-CHOKING
-DE LAVAL nozzle (CONVERGENT-DIVERGENT)
-OPERATING MACHINES (COMPRESSORS)
-COMPRESSORS: VOLUMETRIC; TURBO-COMPRESSORS (STAGE=ROTOR + STATOR):
- AXIAL
- CENTRIFUGAL
- COMPARISON BETWEEN AXIAL AND CENTRIFUGAL COMPRESSOR
- DIAGRAMS: h-s for rotor, stator, compression stage
- PERFORMANCE PARAMETERS: TOTAL to TOTAL efficiency; TOTAL to STATIC efficiency; STATIC to STATIC efficiency.
-GEOMETRICAL TOPICS: MERIDIAN component of velocity
-CENTRIFUGAL COMPRESSOR: Backward blades (negative), forward blades (positive), straight blades (radial), Rotor blade lower surface (or blade pressure face – ventre) and rotor blade upper surface (blade back - dorso): pressure trend as a function of the radius qSTALL; PUMPING; Degree of REACTION; Blade loading (blade stress); Rotor; SLIP FACTOR: EMPIRICAL formulation by STANITZ; DIFFUSERS With blades and Without blades
-AXIAL COMPRESSOR: Degree of REACTION; Symmetrical blades
-VOLUMETRIC COMPRESSOR: Reciprocating compressor (Ideal cycle, Real cycle); Rotating compressor (ROOTS); Sliding vane compressor
-DRIVING MACHINES (TURBINES)
-Introduction
-Thermal turbines: Axial-flow turbine, Inward-flow turbine (centripetal or radial), Stage of turbine, Performance parameters
-INWARD-FLOW TURBINE: Diagram h-s; TOTAL to TOTAL, TOTAL to STATIC, STATIC to STATIC efficiencies; Performance curves; Force fluid flow - blade; Degree of REACTION
-AXIAL-FLOW TURBINE: Rothalpy; Degree of REACTION; Efficiency; Minimum kinetic energy at the discharge; Simplified calculation of a stage; IMPULSE turbine (ACTION): DE LAVAL turbine, Rotor with symmetric blades, Rotor with non-symmetric blades, Real case
REACTION turbine: Ideal case, Optimized case, Comparison bewteen REACTION stage and IMPULSE stage
-RADIAL INWARD-FLOW TURBINE: Some considerations on applications for ICEs
Modalità d'esame
The exam consists of two tests. In the first test, which lasts 15 minutes, students must answer two very short questions designed to assess their basic knowledge. Correct answers to both questions are required to pass the exam. The result of this first test does not contribute to the final grade, but it does determine admission to the second test. The second test consists of an oral exam, during which students are asked to respond in writing to two questions, one for each module, relating to the theoretical part covered in class. Students then discuss their written work with the instructor, who may request further clarification or add additional questions. The written part lasts approximately an hour and a half, after which the teacher collects their homework and students wait in class to be called for the discussion. During the exam, regarding fluid machines and energy systems, their components, and functions, the student's ability to: - use appropriate technical language; - correctly use thermodynamic tools; - describe the operation of machines; - describe the operation of a thermodynamic system and its components; - theoretically justify their architecture; - represent the geometry of a machine or energy system with a freehand sketch;
- evaluate their performance;
- to reproduce demonstrations seen in the classroom;
- to connect a system to its thermodynamic diagram and to each single component.
All of these skills are developed and strengthened during classroom lessons. For this reason, attendance is strongly recommended.
The final grade, expressed in thirtieths, will be higher the more the student is: - independent in articulating the answers to the two questions; - thorough in presenting the topics; - precise in representing the functionality of freehand sketches. Exam dates will be announced in advance via the University of Bologna's AlmaEsami web platform. Registration for the exam is mandatory and possible up to three days before the exam date. At the exam, students must bring an identification document and a pen.
The use of AI tools during the exam is prohibited in any form, including chatbots, text generators, advanced translators, content synthesizers, and tools integrated into devices. Any use of AI is considered a violation of the principle of honesty and fairness set forth in the Policy and may result in the instructor's cancellation of the exam. The instructor remains responsible for ensuring the exam's validity. Only writing instruments (pens, ballpoint pens, pencils) and a ruler (if deemed necessary by the student) are permitted during the exam.
STUDENTS WITH TEMPORARY OR PERMANENT DISABILITIES
Please contact the University office promptly: https://site.unibo.it/studenti-con-disabilita-e-dsa/en
The office will be responsible for suggesting any adjustments to the students concerned, which must however be submitted to the head teacher for approval 15 days in advance. The teacher will evaluate their suitability also in relation to the educational objectives of the course.
"In accordance with the University Code of Ethics, students are urged to maintain the utmost integrity. Any activity aimed at improperly altering the outcome of exams (e.g., cheating, plagiarism, accessing online learning resources, or using unauthorized AI tools) is prohibited. In particular, the mere possession of unauthorized equipment or materials during the exam will result in the immediate cancellation of the exam and reporting to the relevant authorities.
Conduct violating this prohibition may result in disciplinary proceedings or reporting to the relevant authorities, if criminally relevant; in the latter case, there is a risk that the students involved may face criminal proceedings."
Testi di riferimento
"Sistemi Energetici e Macchine a Fluido" Vol. 1 (Macchine a Fluido) e 2 (Complementi), G. Negri di Montenegro, M. Bianchi, A. Peretto, Pitagora Editore.
"Fundamentals Of Renewable Energy Processes" – Aldo Vieira Da Rosa, Juan Carlos Ordonez, Academic Press – ISBN 978-0-12-816036-7
"Advanced Power Generation Systems ", Ibrahim Dincer and Calin Zamfirescu, Elsevier
"Sustainable Power Generation (Current Status, Future Challenges, and Perspectives)", Nikolay Belyakov, Academic Press
"Gas-Turbine Power Generation" - 1st Edition - February 24, 2016 - Paul Breeze - ISBN: 9780128040058
"Macchine a Fluido" DOSSENA V.; FERRARI G.; GAETANI P.; MONTENEGRO G.; ONORATI A.; PERSICO G., HOEPLI Editore
"Turbomachinery Flow Physics and Dynamic Performance" Meinhard T. Schobeiri – Springer – 2nd edition
"Gas Turbine Theory" - H.I.H. Saravanamuttoo, G.F.C. Rogers, H. Cohen, Paul Straznicky, A. C. Nix - Ed. Pearson
"Fluid Mechanics and Thermodynamics of Turbomachinery", Dixon S.L., Hall C., Ed. Butterworth-Heinemann
"Principles of turbomachinery in air breathing engines", E.A. Baskharone, Cambridge University press
"Principles of Turbomachinery", Korpela, S. A.
"Principles of Turbomachinery", Shepherd, D.G., Macmillan Publishing Co., Inc., New York, 1956.
Codice insegnamento B2373
Mathematical Models for Industrial Engineering
1° anno · 1° semestre · 6 CFU · MAT/07 · 0 file
The course focuses on the advanced mathematics areas which are most commonly used in mechanical and industrial engineering applications. At the end of the course the student is able to build, use and validate…
Scheda dell'insegnamento
Obiettivi formativi
The course focuses on the advanced mathematics areas which are most commonly used in mechanical and industrial engineering applications. At the end of the course the student is able to build, use and validate physical-mathematical models.
Programma
Prerequisites
Basic knowledge of Mathematical Analysis and Linear Algebra acquired during an undergraduate degree program. In particular, students are expected to have a solid understanding of: - functions of several real variables, - limits and continuity, - differential and integral calculus in multiple variables.
Course Program
1. Elements of Complex Analysis
Review of the topology of the Euclidean plane and the theory of integration of differential 1-forms. Gauss–Green and divergence theorems in the plane. Introduction to the theory of holomorphic functions: Cauchy–Riemann equations, mean value property, maximum principle. Complex integration: Cauchy’s integral theorem, Cauchy’s integral formula and representation theorem. Complex power series and analytic functions. Zeros of analytic functions and the analytic continuation theorem. Residue theorem and main applications, particularly to the computation of improper integrals.
2. Elements of Functional Analysis
Overview of abstract integration theory. Banach and Hilbert spaces; L^p spaces and spaces of continuous functions. Projections and orthonormal bases in Hilbert spaces. Fourier series and their properties: convergence theorems for periodic functions.
3. Fourier and Laplace Transforms
Fourier transform in L^1 and L^2: algebraic and differential properties, relation with convolution. Introduction to rapidly decreasing functions and distributions. Laplace transform: definition, region of convergence, and main computation rules.
4. Introduction to Partial Differential Equations (PDEs)
Applications of Fourier and Laplace transforms to solving differential equations. Examples of transport, diffusion, and wave propagation models.
5. Elements of Probability Theory
Probability calculus: combinatorial methods, Bayes’ theorem, conditional probability, and independent events. Discrete and continuous random variables; independence of random variables. Expectation, variance, and covariance.
Modalità d'esame
Assessment Methods and Criteria
The exam consists of a single written test aimed at evaluating the understanding of the theoretical foundations and the ability to apply the analytical methods covered during the course.
The written exam lasts 3 hours and consists of 7 exercises/questions (worth approximately 5 points each, with possible additional points for more demanding questions or those requiring mathematical proofs). The structure of the exam is as follows:
1 exercise on the calculation of real integrals using the method of residues; 1 theoretical question on complex analysis; 1 exercise on Fourier series or projections; 1 theoretical question on functional analysis (metric spaces, Banach and Hilbert spaces, projections, Fourier series); 1 exercise and 1 theoretical question on the Fourier transform; 1 theoretical question with a direct application of probability.
In the theoretical questions, knowledge and execution of at least one formal proof will be required.
During the exam, students are required to demonstrate:
knowledge and understanding of the theoretical principles underlying complex analysis, functional analysis, and Fourier analysis; the ability to apply knowledge and understanding in the practical resolution of the proposed mathematical problems (e.g., calculation of integrals, series, and transforms); making judgments in correctly structuring mathematical proofs and selecting the most appropriate resolution methods; communication skills, reflected in the rigor of the mathematical formalism and the logical clarity in the presentation of theoretical concepts; learning skills, by critically connecting cross-disciplinary topics of the syllabus.
The total score of the test is calculated out of a maximum of 35 points; honors (30 e lode) are achieved with a final score exceeding 30. The final grade is determined by considering: the accuracy and completeness of the answers, the depth of understanding of the theoretical concepts, the logical-mathematical rigor in the proofs, and the ability to connect analytical methods to applications. To pass the exam, an adequate achievement of the expected learning outcomes is required.
Exam Rules and Academic Integrity
During the exam, it is not permitted to consult any support material (notes, books, handouts) nor to use calculators or IT tools of any kind, under penalty of exclusion from the test.
In full compliance with the University Code of Ethics (Codice Etico di Ateneo), all students are reminded of the obligation to maintain conduct based on the highest standards of honesty and integrity. Consequently, any action capable of altering the correct and regular execution of the assessment tests is strictly prohibited. By way of example but not limited to, it is forbidden to:
resort to practices of plagiarism or cheating; access educational resources or online platforms during the exam; use Artificial Intelligence tools not expressly authorized (for the purposes of this learning assessment, the use of AI is completely prohibited - Scenario 1); use or possess unauthorized materials, notes, devices, or equipment.
Please note that the mere possession of unauthorized tools or supports during the exam will lead to the immediate invalidation of the submitted work and the simultaneous notification to the competent offices. Furthermore, any behavior in violation of these provisions may trigger disciplinary proceedings against the student and, where criminal implications apply, a report to the competent authorities, with the consequent risk of legal action being initiated.
Additional information and logistics
The exam dates can be found on the AlmaEsami web platform of the University of Bologna.To take part in the exam, each student must register well in advance on the lists available on the platform.On the day of the exam, students will be allowed to take the test only if they present a valid identification document.
Students with special educational needs related to learning disorders and/or disabilities are advised to contact the competent University Office (https://site.unibo.it/studenti-con-disabilita-e-dsa/it) in advance so that possible exam accommodations can be arranged. Any proposed accommodations must be submitted for the instructor’s approval at least 15 days before the exam date, who will assess their appropriateness in relation to the learning objectives of the course.
Clarifications on the recording of the exam grade for those who have the course MATHEMATICAL METHODS FOR ENGINEERING (6 CFU) as a module of the integrated course of NUMERICAL AND MATHEMATICAL METHODS FOR ENGINEERING (12 CFU)
If the MATHEMATICAL METHODS FOR ENGINEERING course (6 CFU) is one of the two modules that, together with NUMERICAL ANALYSIS (6 CFU), constitutes the integrated course of NUMERICAL AND MATHEMATICAL METHODS FOR ENGINEERING (12 CFU), the grade that will be recorded will be calculated with the arithmetic average of the single grades that the student has obtained in the two modules. It should be noted that the result of the average will be rounded to the nearest integer. Only if the resulting average is exactly equidistant between two integers, the grade will be obtained by rounding up to the next highest integer. Lastly, in order to obtain the "30 cum laude" final evaluation, the student must be in one of the two following cases:
- receiving "30 cum laude" in both modules;
- obtaining "30 cum laude" in one module and 30 in the other one.
Lastly, it should be noted that the recording of the final evaluation requires the passing of both the exam of NUMERICAL ANALYSIS (6 CFU) and the exam of MATHEMATICAL METHODS FOR ENGINEERING (6 CFU) in a time interval not exceeding 12 months.
Testi di riferimento
Recommended textbooks:
R. P. Agarwal, K. Perera and S. Pinelas, An Introduction to Complex Analysis, Springer, 2011. C. Barozzi, Matematica per l'ingegneria dell'informazione, ristampa aggiornata, Zanichelli, 2005. M. Cadegone, L. Lussardi, Metodi matematici per l’ingegneria, seconda edizione, 2021. K. F. Riley, M. P. Hobson, S. J. Bence, Mathematical Methods for Physics and Engineering, Cambridge University Press, 2006. F. Gazzola, F. Tomarelli, M. Zanotti, Analytic functions Integral transforms Differential equations, Esculapio, 2023. [italian language edition] F. Gazzola, F. Tomarelli, M. Zanotti, Analisi complessa trasformate Equazioni differenziali, Esculapio, 2023.
Recommended for further study:
E. M. Stein, R. Shakarchi, Princeton Lectures in Analysis II: Complex Analysis, Princeton University Press, 2003. E. M. Stein, R. Shakarchi, Princeton Lectures in Analysis I: Fourier Analysis, An Introduction, Princeton University Press, 2003. E. M. Stein, R. Shakarchi, Princeton Lectures in Analysis III: Real Analysis, Measure Theory, Integration, and Hilbert Spaces, Princeton University Press, 2005. E. M. Stein, R. Shakarchi, Princeton Lectures in Analysis IV: Functional Analysis, Introduction to Further Topics in Analysis, Princeton University Press, 2011 S. Salsa, G. Verzini, Partial Differential Equations in Action, UNITEX Springer, 2022. A. Pascucci, Probability Theory I, UNITEX Springer, 2024. [italian language edition] A. Pascucci, Teoria della Probabilità variabili aleatorie e distribuzioni, UNITEX Springer, 2020.
To cover possible gaps in Mathematical Analysis prerequisites and for introductory review:
N. Fusco, P. Marcellini, C. Sbordone, Mathematical Analysis, UNITEX Springer, 2022. [italian language edition] N. Fusco, P. Marcellini, C. Sbordone, Lezioni di Analisi Matematica Due, Zanichelli, 2020.
Codice insegnamento B2374
Mechanical Plants and Industrial Logistics
1° anno · 2° semestre · 9 CFU · ING-IND/17 · 0 file
At the end of the course, the student knows theoretical principles, functional schemes, methodologies for choice of components, design methods, optimization criteria both on technical and economic point of view,…
Scheda dell'insegnamento
Obiettivi formativi
At the end of the course, the student knows theoretical principles, functional schemes, methodologies for choice of components, design methods, optimization criteria both on technical and economic point of view, standards and rules regarding the mechanical plants which are auxiliary systems present in the production systems in order to make available the necessary services for the correct development of production processes.
Programma
INDUSTRIAL LOGISTICS
INTRODUCTION.Introduction to logistics and logistic functions. Today's market features and logistic key-role. Main characteristics and industrial management feedback
MANUFACTURING SYSTEM DEVELOPMENT. Integration Theory in manufacturing. Computer integrated Manufacturing (CIM)
PRODUCT vs. PACKAGE AND LOGISTIC DECISIONS. Innovation and product study. Product and packaging management. Different kinds of packaging functions. Pallets and EUR-EPAL. The problem of Package waste disposal.
PRODUCTION PLANNING. The aggregate production plan (PP) and the master production plan (MPS). Demand forecasting, supply and production lead times, decoupling point, inventory management.
MATERIAL MANAGEMENT The material requirements planning (MRP) and the lean production approach. Push and pull strategies and related planning tools.
INVENTORY MANAGEMENT. Purchase and production economic order quantity (EOQ), the fixed-order quantity and the fixed-time period models. The safety stock and the level of service. The part-period balancing: minimum part-period cost and the economic part-period methods.
Introduction: valves (intercepting, regulating, mixing, deviating, pressure regulating, safety valves, thermostatic), actuators (pneumatic, electric, hydraulic), compressors, condensate drainers, filters (gravity chambers, cartridge filters, coalescent filters), heat exchangers, instrumentation.
ATEX and PED normative analysis. Case study: ATEX classification of a hydrogen plant.
Biomass plants: analysis of biomass combustion issues, assessment of biomass environmental impacts, safety devices, P&I of a biomass boiler, example of P&I of the integration of a biomass boiler with an existing thermal power plant, components analysis.
Refrigeration plant at three temperature levels: GWP and ODP definitions, characteristics and choice of refrigerant fluids, P&I analysis of a three-temperature refrigerator system, components analysis.
Pneumatic conveying plant: analysis of plant’s main components (rotary valve, deviating valves, air compressor, weighing system with load cells, multiplexer panel), P&I of a pneumatic conveying plant, analysis of the monitoring and control system.
Solar thermal panels plant for domestic hot water production: analysis of thecnical characteristics of solar thermal panels, safety devices, thermal storage, example of P&I plant.
Solar cooling: references to the principle of operation of BrLi refrigeration systems, P&I of BrLi cooling machine with mass and energy balance, introduction to solar thermal systems, including concentrating systems, P&I of solar cooling plant, components analysis.
Gas compression plant: P&I of a gas compressor plant, components analysis, insight into test procedures and performance testing.
Modalità d'esame
Achievement will be assessed by the means of a final exam. This is based on an analytical assessment of the “expected learning outcomes” described above. In order to properly assess such achievement, the examination is based on a written test, lasting up to two hours, and composed of three questions, of which at least one being about plant P&I. Two questions are selected from the programme of "Mechanical Plants", while a third question is from the programme of "Industrial Logistics", and it can be a theoretical and/or a numeric-themed application
The rating is assigned based on the overall assessment of the whole test.
Higher grades will be awarded to students who demonstrate an organic understanding of the subject, a high ability for critical application, and a clear and concise presentation of the contents, with particular attention to the use and the comprehension of technical terms, graph, diagrams related to the service plants and the safety on work.
To obtain a passing grade, students are required to at least demonstrate a knowledge of the key concepts of the subject, some ability for critical application, and a comprehensible use of technical language.
A failing grade will be awarded if student shows knowledge gaps in key-concepts of the subject, inappropriate use of language and logic failures in the analysis of the subject. Then the exam result not sufficient if at least one question is not sufficient.
Usually the written test correction immediately follows the written test end. So, it is possible to make further oral questions to the students to better assess their skills and to better define the final evaluation.
Students with DSA or temporary or permanent disabilities: it is recommended to contact the responsible University office in good time (https://site.unibo.it/studenti-con-disabilita-e-dsa/it): it will be their responsibility to propose any adaptations to the students concerned, which must however be submitted, 15 days in advance, to the approval of the lecturer, who will evaluate the opportunity also in relation to the educational objectives of the course.
For each exam session, students who have acquired student worker status may request an alternative exam session, meaning a replacement for one of the regular exam sessions for the session. Students must contact the lecturer at least 14 days before the first scheduled exam of the session to find a common date for all requests received.
In accordance with the University Code of Ethics (Codice Etico di Ateneo), students’ attention is drawn to the obligation to adopt conduct based on the highest standards of integrity. Any activity that may compromise the proper conduct of examinations is prohibited, including but not limited to:
- cheating and plagiarism; • access to online learning resources; • use of artificial intelligence tools not expressly authorized; • use or possession of unauthorized materials or equipment.
It is specified that the mere possession of unauthorized tools or materials during the conduct of any examination results in the immediate invalidation of the submitted work and notification to the competent offices.
Any conduct in violation of the above provisions may result in disciplinary proceedings and, where criminal relevance applies, reports to the competent authorities, with the consequent risk of criminal proceedings being initiated against the students involved.
Testi di riferimento
MECHANICAL PLANTS
- readings directly supplied by teacher and available on virtual UniBo spaces
Impianti Meccanici, di Sergio Fabbri, Ed. Patron.
Elementi di Impiantistica Meccanica_Aria e Acqua, di Sergio Fabbri, Ed. Pitagora Editrice Bologna.
Impianti Meccanici per l'Industria, di Arrigo Pareschi Ed. Progetto Leonardo, Bologna. - PARESCHI A., FERRARI E., PERSONA A., REGATTIERI A., “Logistica Integrata e Flessibile”, Ed.Esculapio, 2007
Codice insegnamento B2375
Mechanics and Dynamics of Machines
1° anno · 2° semestre · 9 CFU · ING-IND/13 · 0 file
The student acquires advanced concepts and methods for the functional design of the machines and is able to develop models of mechanical systems, with reference to multibody systems and mechanical vibrations.
Scheda dell'insegnamento
Obiettivi formativi
The student acquires advanced concepts and methods for the functional design of the machines and is able to develop models of mechanical systems, with reference to multibody systems and mechanical vibrations.
Programma
Recall of basic concepts. Machine and Mechanism. Analysis versus synthesis. Links and Kinematic Pairs. Linkages. Kinematic chain. Mobility analysis. Degrees of Freedom of a mechanism. Kinematics of a rigid body in a plane. The Instantaneous center of velocity. Kennedy’s Theorem. Center of curvature. Centrodes. Conjugate profiles. Kinematic analysis of planar linkages.
1. Kinematics of linkages. Analysis versus synthesis. Modular approach to kinematic analysis. Assur groups. Kinematic Synthesis. Tasks of Kinematic Synthesis. The Four-Bar linkage. Grashof rule. Graphical synthesis. Synthesis of a crank-rocker four-bar linkage. Synthesis of a double rocker four-bar linkage. Motion generation: two and three prescribed positions. Path generation: Euler-Savary equation; inflection circle; center of curvature; Robert's theorem; example and applications. Analytical synthesis. The Dyad. The four-bar linkage: motion generation; path generation; function generation. Order synthesis.
2. Cam mechanism design. Introduction: classification of Cams and followers; Displacement diagram; Kinematic coefficients; Pressure angle; Radius of curvature of cam profile; Cam size; examples. Kinematic analysis: equivalent linkages. Graphical synthesis of cam profile: examples with translating cam; examples with rotating disc cam. Analytical synthesis of the cam profile with the envelope method. Analytical synthesis of cam profile and determination of other design parameters: translating radial follower (knife-edge; roller; flat-faced), and oscillating roller follower. Prevention of profile undercutting.
3. Gears. Introduction: general concepts and definitions; Types of gears; Ordinary and Epicyclic gear trains; Transmission ratio and gear ratio; the fundamental Law of gearing; tracing pairs of conjugate profiles; the involute curve. The involute gears: the geometry of involute gears; base circle and pitch circle; the advantage of involute gears; contact line and pressure angle; the involute rack. Spur involute gears. Tooth element proportions. Rack-Cutter. Undercutting. Wildhaber’s concept. Modified involute Gears. Involute Helical Gears with parallel axes. Bevel Gears. Worm gearing.
4. Dynamics of Machines and Fundamental of mechanical vibrations. Dynamics of machines: inertia forces and moments; kinetic energy, D'Alembert's principle; principle of virtual works; principle of conservation of energy; Lagrange's equations; equivalent mass, inertia, forces and moments. Mechanical vibrations: discrete and continuous systems; spring elements; damping elements (viscous damping; Coulomb or Dry-Friction damping; hysteretic damping); harmonic motion.
5. Single Degree of Freedom Systems. Free vibrations: undamped system; viscous damping; Coulomb damping; hysteretic damping. Phase-plane representation. Logarithmic decrement method. Energy method: introduction to Rayleigh's method. Excited vibrations: harmonic excitation; Frequency Response Function (FRF); half-power bandwidth method; response of a damped system under rotating unbalance; forced vibration with hysteresis damping; impulse response function; response under a non-periodic force.
6. Two Degrees of Freedom Systems. Equations of motion: choice of coordinates; static and dynamic coupling. Free vibrations: characteristic equation; natural frequencies; modes of vibration; initial conditions; rigid-body motion. Forced vibration analysis: impedance matrix; example; the mass damper system.
7. Multi-degree of Freedom systems. Equations of motion of undamped systems in matrix form. Eigenvalue problem: eigenvalues and eigenvectors; orthogonality; modal matrix; uncoupled equations; rigid-body motions. Forced vibration of viscously damped systems: proportional damping; modal and pseudo-modal methods.
8. Continuous Systems. Transverse vibration of a String. Longitudinal vibration of a bar. Orthogonality of mode shapes. Torsional vibration of a shaft. Lateral vibration of beams. Approximate methods: Rayleigh’s method; Rayleigh-Ritz method. Examples of excited systems.
9. Vibration measurements and modal analysis. Vibration measurement scheme. Signal analysis: time and frequency domain. Data sampling: Shannon's theorem; Aliasing. Discrete Fourier Transform. Choice of acquisition parameters. Experimental modal analysis: basic concepts; Transfer Function and Frequency Response Function (FRF); experimental measurements of FRFs.
10. Elastodynamic modelling. Lumped parameter modeling: longitudinal vibration of a bar; lateral vibration of a beam; simplified vehicle; forging hammer; mechanism with backlash; mechanisms for reciprocating motion.
Modalità d'esame
The final examination consists of a series of questions designed to assess both the acquisition of the knowledge covered by the course syllabus and the achievement of the intended learning outcomes:
- knowledge of advanced methods for the functional design of the machines;
- ability to address modelling issues in mechanical systems, with reference to multibody systems and mechanical vibrations.
The questions are aimed at assessing both the understanding of theoretical concepts and the ability to apply analytical methods to engineering problems.
The examination consists of a written test comprising multiple-choice questions, numerical-response questions requiring the calculation of specific quantities, together with an exercise involving the analysis of a two-degree-of-freedom mass–spring system.
The examination takes place in a computer laboratory and is conducted using the Examination On Line (EOL) platform.
During the examination, the use of textbooks, notes, or other written materials is not permitted. Access to online learning resources is prohibited.
The use of Artificial Intelligence (AI) tools during the examination is strictly forbidden in any form. Any such use constitutes a violation of academic integrity.
Students are advised to use a non-programmable pocket calculator.
To be admitted to the examination, students must submit an Exercise Workbook to the Examining Committee a few days before the scheduled examination date, in accordance with the instructions provided on https://virtuale.unibo.it/ . An email containing the submission instructions will be sent to students a few day before the scheduled examination date.
In accordance with the University Didactic Regulations, students may request the cancellation of a positive grade and retake the examination. The following rules apply:
a positive grade may be cancelled only on the day of the examination; a cancelled grade cannot be reinstated under any circumstances; each student may request grade cancellation only once during the course.
Further information on the examination structure, passing requirements, and grading criteria is available on https://virtuale.unibo.it/ .
Testi di riferimento
1. Erdman A.G., Sandor G.N., Kota S., Mechanism Design: Analysis and Synthesis, 4th edition, Prentice Hall, 2001.
2. Norton R.L., Cam Design and Manufacturing Handbook, Industrial Press, 2002.
3. Uicker J. J., Pennock G. R., Shigley J. E., Theory of Machines and Mechanisms, 5th edition, Oxford University Press, 2016.
4. Vullo V., Gears: Geometric and Kinematic Design, vol. 1, Springer Nature, 2020.
5. Rao S.S., Mechanical vibrations, Sixth edition, Pearson Education, 2018.
6. Inman D.J., Engineering Vibration, 4th edition, Pearson Education, 2014.
7. Slides and notes from the lessons (available on https://virtuale.unibo.it/).
Codice insegnamento B2376
Advanced Design Methods (I.C.)
2° anno · 1° semestre · 0 file
At the end of the integrated course, the student possesses advanced knowledge of structural design methods for composite and additively manufactured components, including material characterization and optimization for…
Scheda dell'insegnamento
Obiettivi formativi
At the end of the integrated course, the student possesses advanced knowledge of structural design methods for composite and additively manufactured components, including material characterization and optimization for performance, cost, and sustainability. The student can apply the Finite Element Method, both theoretically and through commercial software, to analyze and design static and dynamic structural systems. The students acquire in-depth knowledge of the mathematical foundation of the Finite element Method. They are proficient in using commercial FEM code to solve structural dynamic and static problems.
Programma
Il corso fornisce agli studenti le conoscenze fondamentali per eseguire analisi strutturali tramite il metodo degli elementi finiti, promuovendo un uso consapevole dei software specifici per tali analisi. Verranno trattati i concetti basilari del metodo degli elementi finiti, le diverse tipologie di elementi e il loro impiego in relazione agli obiettivi dell'analisi. Una parte del corso sarà dedicata all'interpretazione dei risultati e alla validazione dei modelli elaborati.
- Conoscenza e capacità di comprensione applicate: possiede conoscenze approfondite dei metodi di analisi strutturale e dei software utilizzati per esaminare i vincoli strutturali e di produzione dei prodotti industriali. È in grado di applicare gli strumenti appresi per ottenere dati utili al progetto.
- Autonomia di giudizio: è capace di analizzare i risultati e di validare i modelli sviluppati.
Modalità d'esame
La verifica dell’apprendimento consiste in una prova orale, accompagnata dalla risoluzione e discussione di un esercizio pratico mediante il software FEM utilizzato durante il corso.
La prova orale è finalizzata ad accertare la conoscenza e la comprensione dei fondamenti teorici del Metodo degli Elementi Finiti, con particolare riferimento alle ipotesi di modellazione, alla scelta degli elementi, alla definizione delle condizioni al contorno e all’interpretazione dei risultati numerici.
L’esercizio pratico consente di valutare la capacità dello studente di applicare i metodi e gli strumenti presentati durante il corso alla risoluzione di problemi strutturali statici e/o dinamici mediante software FEM commerciale. In particolare, sarà valutata la capacità di impostare correttamente il modello numerico, scegliere ipotesi di modellazione adeguate, applicare carichi e vincoli, eseguire l’analisi e interpretare criticamente i risultati ottenuti.
Testi di riferimento
F. Cesari, "Introduzione al metodo degli elementi finiti"
F. Cesari, "Meccanica Delle Strutture. Metodo Degli Elementi Finiti"
G.Bhashyam, Ansys Mechanical - A Powerful Nonlinear Simulation Tool, Ansys Inc, Sep. 2012
Klaus-Jürgen Bathe, "Finite Element Procedures" 2014 http://web.mit.edu/kjb/www/Books/FEP_2nd_Edition_4th_Printing.pdf
Codice insegnamento B2387
Advanced and Sustainable Manufacturing
2° anno · 1° semestre · 6 CFU · ING-IND/16 · 0 file
The student will acquire the skill to selectadvanced manufacturing technologies for metallic material processing, as well as implementing and comprehending the relationships between process parameters and product…
Scheda dell'insegnamento
Obiettivi formativi
The student will acquire the skill to selectadvanced manufacturing technologies for metallic material processing, as well as implementing and comprehending the relationships between process parameters and product characteristics. The student will be able to evaluate the suitability and consistency of technologies in order to obtain specific requirements for the finished product, as well as to evaluate the different processes in terms of sustainability and environmental impact.
Programma
MODULE 1
1. JOINING TECHNOLOGIES
Friction welding Technologies: Friction welding, Friction stir welding (FSW), Solid State Bonding. Diffusion Bonding. Adhesive Bonding. Welding of polymers, Ultrasonic Welding.
2. ADVANCED MATERIAL REMOVAL TECHNOLOGIES
Electrical Discharge Machining (EDM) and Wire Electrical Discharge Machining(WEDM). Machines architecture and components. Process parameters. Electrodes: materials and technologies. Examples. Chemical and electro-chemical machining processes (ECM). Ultrasonic machining (USM). machining/welding
3. ADVANCED CUTTING TECHNOLOGIES
Mechanical cutting: Shearing technologies: blanking, piercing and punching, cutoff, fine blanking. Thermal cutting: high energy beam cutting, Oxygen Torch cutting, Plasma cutting. Others: water jet and abrasive water jet.
4. PROCESSING OF METAL POWDERS
Production of powders, Powder Mixing and Blending, Compacting, Sintering. Secondary and finishing operations. Proprieties of metal powders. Components. Hot isostatic pressing. Powder forming. Metal Injection Molding (MIM) or Powder Injection Molding (PIM). Properties of P/M Products.
MODULE 2
5. SUSTAINABILITY OF MANUFACTURING PROCESSES
Introduction to sustainability in manufacturing Life Cycle Assessment (LCA) of manufacturing processes Sustainability through advanced manufacturing technologies
6. LASER THEORY PROCESSES
Fundamentals of laser processes Laser sources, optics, and beam scanning systems Laser–material interaction Laser processes: laser heat treatment, laser welding, laser cutting, and laser micromachining
7. MODELING OF LASER PROCESSES
Modeling of laser processes: from analytical models to AI-based models In-class exercises using CFD simulation software (Flow3D)
8. FUNDAMENTALS OF ADDITIVE MANUFACTURING FOR METALLIC MATERIALS
Introduction to additive manufacturing processes Laser Powder Bed Fusion (LPBF) Directed Energy Deposition (DED)
Modalità d'esame
The exam aims to verify the achievement of the Learning outcomes:
· knowledge of the meaning of sustainability of manufacturing technologies and measurement metrics;
· knowledge of advanced processing technologies;
· ability to analyze and propose complex technological cycles, in relation to the adequacy and compatibility of the technologies identified to obtain specific requirements on the finished product;
· ability to find specialized bibliography on innovative technologies;
· team working skills in carrying out the study.
Preliminary or after the final test, the students must discuss the team-working project on the selected technology, a score up to 30/30 is given.
The exam is performed in a written form, followed by an optional oral discussion on the same day or on subsequent days. The use of supporting materials such as textbooks, notes, or even computer equipment is not permitted during the exam.
The written exam consists of open-ended questions covering all course topics. Two questions will be related to Module 1, each worth 8 points. During Module 2, software (Flow3D) will be used for some in-class exercises. Students who attend classes (100% attendance during the exercises) will be required to complete three simple laser process modeling exercises in small groups during the lectures and present their results at the beginning of the next lecture. Completion of the exercise will certify successful completion of this part of the course. Students who do not attend (or attend only partially) the exercises will be required to study supplementary teaching materials that will be provided by the instructor at the beginning of the course via Virtuale. The preparatin of the supplementary course material will be assessed through the written exam, along with the other theoretical topics covered in the course. The exact dates and times of the in-class exercises will be communicated at the beginning of the course by the instructor (Prof. Erica Liverani).
Module 2 is assigned a score out of 16, divided as follows: -4 points for question 3 -4 points for question 4 -8 points for the in-class exercises or for questions 5 and 6 (4 points each) P.S. The minimal grade for passing Module 2 is 10/16.
The written exam will therefore be scored as the sum of Module 1 (maximum 16 points) and Module 2 (maximum 16 points), for a total of 32 points. Scores higher than 30 will correspond to a final grade of 30 cum laude.
Any oral exam (to be conducted at the student's request) may cover all course topics and the group study completed. The final grade is the average of the grades obtained in the group discussion, the written exam (Module 1 and Module 2), and the oral exam (if applicable). For written exam grades lower than 24/32, the average will be weighted with greater weight than the written exam grade.
At least, 5 evaluation session will be realized through the accademic year.
Tests list and results are managed through Almaesami website: [https://uniwex.unibo.it/]https:// .unibo.it/ [https://almaesami.unibo.it/] It's mandatory to sign in on the website in order to attend the exam, the lists are closed 2 days before the exam.
In accordance with the University Code of Ethics (Codice Etico di Ateneo), students’ attention is drawn to the obligation to adopt conduct based on the highest standards of integrity. Any activity that may compromise the proper conduct of examinations is prohibited, including but not limited to:
- cheating and plagiarism; • access to online learning resources; • use of artificial intelligence tools not expressly authorized; • use or possession of unauthorized materials or equipment.
It is specified that the mere possession of unauthorized tools or materials during the conduct of any examination results in the immediate invalidation of the submitted work and notification to the competent offices.
Any conduct in violation of the above provisions may result in disciplinary proceedings and, where criminal relevance applies, reports to the competent authorities, with the consequent risk of criminal proceedings being initiated against the students involved.
Testi di riferimento
1. DeGarmo , J. T. Black, Ronald A. Kohser DeGarmo's Materials and Processes in Manufacturing, 11th Edition, Wiley, ISBN
2. Michele Monno, Barbara Previtali, Matteo Strano “Tecnologia meccanica. Le lavorazioni non convenzionali” CittàStudi Edizioni, ISBN: 8825173776
3. E. Capello, Le lavorazioni industriali mediante laser di potenza, 2009, Maggioli Editore, ISBN-10: 8838741816
4. Gholami, H., Abdul-Nour, G., Sharif, S., & Streimikiene, D. (Eds.), Sustainable Manufacturing in Industry 4.0: Pathways and Practices (2023), Springer, ISBN 978-981-19-7217-1.
Codice insegnamento B2391
CONDITION MONITORING AND PREDICTIVE MAINTENANCE LABORATORY-(I.C.)
2° anno · 2° semestre · 0 file
Condition Monitoring and Predictive Maintenance Laboratory (I.C.)
2° anno · 2° semestre · 0 file
At the end of the integrated course, the student masters the theoretical, methodological, and practical foundations of Condition Monitoring and Predictive Maintenance for industrial equipment. The student is able to…
Scheda dell'insegnamento
Obiettivi formativi
At the end of the integrated course, the student masters the theoretical, methodological, and practical foundations of Condition Monitoring and Predictive Maintenance for industrial equipment. The student is able to design and perform experimental vibration analyses, apply signal processing and numerical modeling techniques, and implement advanced Machine Learning–based diagnostic and predictive strategies for the dynamics and health assessment of mechanical systems. At the end of this module the student is able to arrange and conduct experimental tests to detect mechanical vibrations of mechanisms and machines, with different devices and transducers. The student knows numerical modelling methods and tools to analyze the dynamics of complex mechanical systems, including elastodynamic phenomena. The student gains knowledge about the main signal processing and analysis techniques for vibration response characterization and diagnostics of mechanical systems, enabling Condition Monitoring and Predictive Maintenance strategies.
Programma
Rilievo di vibrazioni mediante accelerometri Allestimento setup sperimentale e definizione parametri di acquisizione Rilievo di segnali stazionari da ingranaggi e rotori squilibrati Acquisizione di segnali non stazionari Analisi di segnali accelerometrici Analisi nei domini di tempo e frequenza di segnali stazionari Analisi tempo-frequenza di segnali non stazionari Altre tecniche avanzate di analisi Acquisizione ed analisi di segnali da altre tipologie di trasduttori Tachimetri/vibrometri laser Sensori di forza piezoelettrici Microfoni Modellazione dinamica ed elastodinamica Simulazioni multibody di corpo rigido e flessibile Metodi di sottostrutturazione dinamica Analisi Modale Sperimentale Impact test Eccitazione con shaker modale
Modalità d'esame
La verifica dell'idoneità del candidato prevede un'attività da svolgere in gruppi di 2/3 studenti, strutturata come segue:
Prova pratica in laboratorio: predisposizione di sensori e sistema di acquisizione, e acquisizione di segnali sperimentali di vibrazioni Processamento ed analisi dei segnali acquisiti, al fine di identificare i fenomeni di interesse Preparazione di una relazione/presentazione sull'attività svolta ed esposizione orale della stessa
Sarà possibile eseguire le misure della prova pratica nell'ultima giornata di lezione. Successivamente, sarà possibile effettuare le misure in occasione degli appelli d'esame ufficiali. Non è possibile effettuare la prova pratica e la presentazione orale nel medesimo appello d'esame, dal momento che la prova orale è basata sul processamento dei segnali acquisiti nella prova pratica.
Gli studenti che non prenderanno parte ad almeno il 75 % delle esercitazioni in laboratorio dovranno sostenere una ulteriore prova scritta.
In conformità al Codice Etico di Ateneo, si richiamano gli studenti alla massima correttezza. È vietata ogni attività volta a modificare indebitamente l’esito delle prove (es. copiatura, plagio, accesso alle risorse didattiche online, ricorso a strumenti AI non autorizzati). Si segnala in particolare che il solo possesso di strumentazione o materiale non autorizzato durante la prova comporta l’annullamento immediato del compito e la segnalazione agli uffici competenti. I comportamenti che contravvengono a questo divieto possono dare corso a procedimenti disciplinari o a segnalazioni alle autorità competenti, se penalmente rilevanti; in quest’ultimo caso vi è il rischio che gli studenti coinvolti possano incorrere in procedimenti penali.
Testi di riferimento
Le presentazioni mostrate durante il corso saranno rese disponibili.
Testi suggeriti:
Rao S.S., “Mechanical vibrations”, Third edition, Addison Wesley Pub. Company, 1995. Inman D.J., “Engineering Vibration”, Prentice Hall, 1994.
Articoli scientifici per approfondimento temi specifici.
Codice insegnamento B2403
Design and Virtual Prototyping of Automatic Machines Laboratory (I.C.)
2° anno · 2° semestre · 0 file
At the end of the integrated course, the student understands the architecture and design principles of automatic machines and is able to perform their conceptual and embodiment design. The student also acquires skills in…
Scheda dell'insegnamento
Obiettivi formativi
At the end of the integrated course, the student understands the architecture and design principles of automatic machines and is able to perform their conceptual and embodiment design. The student also acquires skills in immersive and semi-immersive visualization, animation, and interaction with mechanical systems through XR technologies, applying software and hardware tools for virtual prototyping and design evaluation. The students acquire in-depth knowledge of the architecture of different types of automatic machines. They learn how to do the conceptual or the embodiment design of an automatic machine of industrial interest.
Programma
Aspetti generali dei processi industriali e della loro automazione; macchine automatiche e linee di produzione automatizzate; grado di flessibilità di un sistema di produzione automatizzato; parametri di produttività. Tipologie principali di macchine automatiche e robot, e loro classificazione funzionale.
Principali architetture operative di macchine automatiche monoscopo, con particolare riferimento al settore del packaging e del montaggio automatico; macchine intermittenti e continue e loro aspetti funzionali e costruttivi. Criteri generali di dimensionamento di macchine intermittenti e continue.
Sistemi ausiliari per la manipolazione delle parti nei sistemi di produzione automatizzati.
Elementi di normativa brevettuale.
Modalità d'esame
Test a risposta multipla per la valutazione delle conoscenze teoriche.
Discussione di un progetto di origine industriale che verrà assegnato agli studenti durante il primo mese di lezione.
Strumenti AI possono essere usati se esplicitamente consentiti dal docente.
Testi di riferimento
Per la preparazione dell'esame lo studente potrà fare riferimento alla copia delle slides proiettate in aula e alle dispense fornite dal docente. Altri testi di riferimento consigliati sono:
- Nordmann R. and Birkhofer H., Elementi di macchine e meccatronica, McGraw-Hill, 2002.
- Derby S. J., Design of Automatic Machinery, CRC Press, 2004.
- Siciliano B. and Khatib O. editors, Handbook of robotics, Springer Verlag, 2008.
Codice insegnamento B2406
Design of Automatic Machines
2° anno · 2° semestre · 3 CFU · ING-IND/14 · 0 file
At the end of the integrated course, the student understands the architecture and design principles of automatic machines and is able to perform their conceptual and embodiment design. The student also acquires skills in…
Scheda dell'insegnamento
Obiettivi formativi
At the end of the integrated course, the student understands the architecture and design principles of automatic machines and is able to perform their conceptual and embodiment design. The student also acquires skills in immersive and semi-immersive visualization, animation, and interaction with mechanical systems through XR technologies, applying software and hardware tools for virtual prototyping and design evaluation. The students acquire in-depth knowledge of the architecture of different types of automatic machines. They learn how to do the conceptual or the embodiment design of an automatic machine of industrial interest.
Programma
General aspects of industrial processes and their automation; machines and automated production lines; degree of flexibility of an automated production system; productivity parameters. Main types of automatic machines and robots, and their functional classification. Main operational architectures of single-purpose machines, with particular reference to the sector of the packaging and the automatic assembly; intermittent and continuous machines and their functional and constructive characteristics. General criteria for sizing intermittent and continuous machines.
Auxiliary systems for the manipulation of the parts in automated production systems. Elements of patent law.
Modalità d'esame
Multiple answer test for the evaluation of the knowledge of the theory. Discussion of an industrial project that will be assigned to the students during the first month of the course.
AI tools may be used when explicitly allowed be the teacher.
Testi di riferimento
For the exam, students can refer to a copy of the slides projected in the classroom and handouts provided by the teacher. Other reference books are recommended:
- Nordmann R. and Birkhofer H., Elementi di macchine e meccatronica, McGraw-Hill, 2002.
- Derby S. J., Design of Automatic Machinery, CRC Press, 2004.
- Siciliano B. and Khatib O. editors, Handbook of robotics, Springer Verlag, 2008.
Codice insegnamento B2407
Digital Engineering Laboratory (I.C.)
2° anno · 2° semestre · 0 file
At the end of the integrated course, the student understands and applies the main techniques for modeling, simulating, and visualizing complex mechatronic systems through Digital Twins. The student is able to develop and…
Scheda dell'insegnamento
Obiettivi formativi
At the end of the integrated course, the student understands and applies the main techniques for modeling, simulating, and visualizing complex mechatronic systems through Digital Twins. The student is able to develop and represent 3D Digital Twins in Mixed Reality environments using appropriate software and hardware tools, and to implement simulations for multibody dynamics, virtual commissioning, and real-time data-driven system analysis. The students learn the main approaches and techniques to model complex mechatronic systems. The development of the Digital Twins of robots and automatic machines will be taught through the practical use of alternative software tools available at the computer lab. Different kinds of Digital Twins are developed according to the scope of their simulations, in particular dealing with Multibody systems dynamics, Virtual Commissioning, and real-time simulations of physical prototypes fed by measured data.
Programma
Introduction to the basic concepts of: modelling, simulation and co-simulations of mechatronic systems; data-driven and model-based monitoring of machinery; Digital Twin. Kinematic, static, dynamic, and elastodynamic modelling/simulations of mechanisms and machines. CAE tools for machine design optimization.
Modalità d'esame
Delivery of assignments/projects, consisting of the development and simulations in the presented software of virtual models of (simple) sub-units of automatic machines/mechatronic systems.
Testi di riferimento
Slides will be uploaded on the Unibo platform Virtuale.
Codice insegnamento B2411
Exergy and Pinch Point Analysis for Sustainable Energy Use
2° anno · 1° semestre · 6 CFU · ING-IND/10 · 0 file
At the end of the integrated course, the student can perform detailed energy and exergy analyses of thermodynamic and energy systems, including sustainable powertrains, evaluating losses, efficiencies, and…
Scheda dell'insegnamento
Obiettivi formativi
At the end of the integrated course, the student can perform detailed energy and exergy analyses of thermodynamic and energy systems, including sustainable powertrains, evaluating losses, efficiencies, and opportunities for improvement. The student can design heat exchanger networks, assess combustion and renewable energy technologies, and apply principles of minimal entropy generation and sustainability in energy conversion and system optimization. On completion of this module, the student will be able to calculate entropy generation and Energy losses in a thermodynamic/energy system; determine conditions leading to minimal entropy generation in a system; make the necessary assumptions on system definition, operating conditions etc. required to carry out a consistent Energy analysis, suggesting possible improvements; calculate Energy content, reversible work, isentropic efficiency, Energy loss and irreversibility and energy efficiency for different parts of an energy system; apply the Energy analysis method to energy systems; calculate adiabatic flame temperature and Energy loss in combustion processes; determine the pinch temperature and the minimal required thermal load for a suitable industrial process; design heat exchanger networks according to the principles of pinch analysis; suggest measures to reduce heating and cooling needs in an existing heat exchanger network; evaluate pros and cons of traditional and renewable energy sources within the framework of sustainable energy use.
Programma
Thermodynamic methods for efficient and effective energy use: entropy generation minimisation and exergy analysis. Definition of exergy, dead state, thermodynamic equilibrium, reference conditions, extended system and immediate surrounding, entropy generation in interface, entropy, energy and exergy balance equations for closed and open systems, and exergy as non-state function. Equations for energy content and exergy change for closed system, open system with stationary flow and heat exergy in the Carnot model. Exergy loss and energy efficiency (Second Law Efficiency) for technological processes and cycles. Exergy analysis for mixture and separation processes such as desalination and carbon dioxide separation. Exergy analysis for combustion processes.
Exergy analysis for components and systems heat exchangers, vapour power plants, gas turbines, cogeneration, geothermal power plants, fuel cells, Photovoltaic systems, solar thermal systems, wind turbines.
Exergy in processes: refrigeration and liquefaction, drying, desalination, transportation and buildings. Exergy and sustainability.
Pinch point analysis.
Basic concepts such as pinch temperature, minimal need of external heating and cooling, composite curves and GCC (Grand Composite Curve), energy targeting, exemplified through current research and literature. Design of heat exchanger networks according to energy targeting.
Modalità d'esame
Attendance of classes is strongly recommended in order to get firm understanding of the subject, yet it is neither compulsory nor significant in the determination of the final grade, as this is solely based on the candidates' performance during theexamination.
Assessment is individual and based oral examinations consisting of a numerical problem and two questions pertaining on the subjects discussed during the lectures. The only allowed material for the solution of the exercise is the pocket calculator; if tables are needed (e.g. thermodynamic tables), these are provided during the test.
If students have a decision from Bologna University entitling them to Targeted Study Support due to a documented disability, the examiner has the right to give such students an adapted examination or to examine them in a different manner.
Successful completion of the course entitles to a grade from 18 (Pass) to 30 with Merit (Distinction); corresponding grades (e.g. Distinction/Pass with some Distinction/Pass) for international students may be awarded upon request.
In accordance with the University Code of Ethics (Codice Etico di Ateneo), students’ attention is drawn to the obligation to adopt conduct based on the highest standards of integrity. Any activity that may compromise the proper conduct of examinations is prohibited, including but not limited to: • cheating and plagiarism; • access to online learning resources; • use of artificial intelligence tools not expressly authorized; • use or possession of unauthorized materials or equipment.
It is specified that the mere possession of unauthorized tools or materials during the conduct of any examination results in the immediate invalidation of the submitted work and notification to the competent offices.
Any conduct in violation of the above provisions may result in disciplinary proceedings and, where criminal relevance applies, reports to the competent authorities, with the consequent risk of criminal proceedings being initiated against the students involved.
Testi di riferimento
The lectures follow two texts: "E.Michelides - Exergy Analysis for Energy Conversion Systems, Cambridge university Press, 2021" for the exegy analyisis, and "I. Kemp - Pinch Analysis and Process Integration, 2nd Edition,Butterworth and Heinemann, 2006", for the pinch point method. Additional material will be made available on the Virtuale Platform as required.
The following is a list of suggested literature for the interested reader. - Kotas – The Exergy Method of Thermal Plant Analysis - Bejan, Tsatsaronis, Moran - Thermal Design and Optimization - Kemp - Pinch Analysis for Energy and Carbon Footprint Reduction - Rutledge - Energy. Supply and Demand. - Sala Lizarrga, Picallo-Lopez - Exergy Analysis and Thermoeconomics of Buildings.
Codice insegnamento B2385
Exergy and Pinch Point Analysis for Sustainable Energy Use (6 Cfu)
2° anno · 1° semestre · 6 CFU · ING-IND/10 · 0 file
On completion of this module, the student will be able to calculate entropy generation and Energy losses in a thermodynamic/energy system; determine conditions leading to minimal entropy generation in a system; make…
Scheda dell'insegnamento
Obiettivi formativi
On completion of this module, the student will be able to calculate entropy generation and Energy losses in a thermodynamic/energy system; determine conditions leading to minimal entropy generation in a system; make the necessary assumptions on system definition, operating conditions etc. required to carry out a consistent Energy analysis, suggesting possible improvements; calculate Energy content, reversible work, isentropic efficiency, Energy loss and irreversibility and energy efficiency for different parts of an energy system; apply the Energy analysis method to energy systems; calculate adiabatic flame temperature and Energy loss in combustion processes; determine the pinch temperature and the minimal required thermal load for a suitable industrial process; design heat exchanger networks according to the principles of pinch analysis; suggest measures to reduce heating and cooling needs in an existing heat exchanger network; evaluate pros and cons of traditional and renewable energy sources within the framework of sustainable energy use.
Programma
Thermodynamic methods for efficient and effective energy use: entropy generation minimisation and exergy analysis. Definition of exergy, dead state, thermodynamic equilibrium, reference conditions, extended system and immediate surrounding, entropy generation in interface, entropy, energy and exergy balance equations for closed and open systems, and exergy as non-state function. Equations for energy content and exergy change for closed system, open system with stationary flow and heat exergy in the Carnot model. Exergy loss and energy efficiency (Second Law Efficiency) for technological processes and cycles. Exergy analysis for mixture and separation processes such as desalination and carbon dioxide separation. Exergy analysis for combustion processes.
Exergy analysis for components and systems heat exchangers, vapour power plants, gas turbines, cogeneration, geothermal power plants, fuel cells, Photovoltaic systems, solar thermal systems, wind turbines.
Exergy in processes: refrigeration and liquefaction, drying, desalination, transportation and buildings. Exergy and sustainability.
Pinch point analysis.
Basic concepts such as pinch temperature, minimal need of external heating and cooling, composite curves and GCC (Grand Composite Curve), energy targeting, exemplified through current research and literature. Design of heat exchanger networks according to energy targeting.
Modalità d'esame
Attendance of classes is strongly recommended in order to get firm understanding of the subject, yet it is neither compulsory nor significant in the determination of the final grade, as this is solely based on the candidates' performance during theexamination.
Assessment is individual and based oral examinations consisting of a numerical problem and two questions pertaining on the subjects discussed during the lectures. The only allowed material for the solution of the exercise is the pocket calculator; if tables are needed (e.g. thermodynamic tables), these are provided during the test.
If students have a decision from Bologna University entitling them to Targeted Study Support due to a documented disability, the examiner has the right to give such students an adapted examination or to examine them in a different manner.
Successful completion of the course entitles to a grade from 18 (Pass) to 30 with Merit (Distinction); corresponding grades (e.g. Distinction/Pass with some Distinction/Pass) for international students may be awarded upon request.
In accordance with the University Code of Ethics (Codice Etico di Ateneo), students’ attention is drawn to the obligation to adopt conduct based on the highest standards of integrity. Any activity that may compromise the proper conduct of examinations is prohibited, including but not limited to: • cheating and plagiarism; • access to online learning resources; • use of artificial intelligence tools not expressly authorized; • use or possession of unauthorized materials or equipment.
It is specified that the mere possession of unauthorized tools or materials during the conduct of any examination results in the immediate invalidation of the submitted work and notification to the competent offices.
Any conduct in violation of the above provisions may result in disciplinary proceedings and, where criminal relevance applies, reports to the competent authorities, with the consequent risk of criminal proceedings being initiated against the students involved.
Testi di riferimento
The lectures follow two texts: "E.Michelides - Exergy Analysis for Energy Conversion Systems, Cambridge university Press, 2021" for the exegy analyisis, and "I. Kemp - Pinch Analysis and Process Integration, 2nd Edition,Butterworth and Heinemann, 2006", for the pinch point method. Additional material will be made available on the Virtuale Platform as required.
The following is a list of suggested literature for the interested reader. - Kotas – The Exergy Method of Thermal Plant Analysis - Bejan, Tsatsaronis, Moran - Thermal Design and Optimization - Kemp - Pinch Analysis for Energy and Carbon Footprint Reduction - Rutledge - Energy. Supply and Demand. - Sala Lizarrga, Picallo-Lopez - Exergy Analysis and Thermoeconomics of Buildings.
Codice insegnamento B2395
Experimental Fluid Mechanics
2° anno · 1° semestre · 6 CFU · ICAR/01 · 0 file
Students learn advanced fluid mechanics with applications in aerodynamics, compressible hydromechanics and turbulence mixing, and related experimental methods including ultrasound and optical velocimetry for the…
Scheda dell'insegnamento
Obiettivi formativi
Students learn advanced fluid mechanics with applications in aerodynamics, compressible hydromechanics and turbulence mixing, and related experimental methods including ultrasound and optical velocimetry for the investigation of fluid flow
Programma
Fundamentals on fluid kinematics Fundamentals on differential equations Inviscid and irrotational flows No-slip condition and the boundary layer Turbulence flow External flow: drag and lift Ultrasound Techniques Optical Methods
Modalità d'esame
Two methods are available: 1st) candidate presents his personal work and understanding regarding experimental dataset acquired in the Hydraulic Engineering Laboratory, 2nd) candidate is probed with a short interview on EFM class topics. In both cases single candidate exam takes about 15 min.
In more details, students aiming at experimental dataset methodology, upon email request, will be provided with a specific task regarding the experimental dataset 1-2 weeks before the fixed date for the exam. This method is possible only for students attending EFM classes since the beginning and belonging to laboratory Working Groups.
As an alternative, short interview will consist of two questions one focusing on Ultrasound techniques and Optical methods and another focusing on Boundary layer, Turbulence flow and External flow.
For students willing to the 1st method, actively attending laboratory experiences and classes focusing on data post-processing are mandatory.
The final grade is the assessment of the presentation/oral interview, reflecting the level of understanding achieved on the topics covered during the course: fluid mechanics and related experimental methods. This assessment also takes into account personal exploration of the proposed topics and clarity of presentation.
Testi di riferimento
Yunus A. Cengel, John M. Cimbala. Fluid Mechanics: Fundamentals and Applications (fourth edition) McGraw-Hill Education, 2018.
Christophe Bailly, Geneviève Comte-Bellot. Turbulence, Springer, 2015.
Aberle, J.; Rennie, C.D.; Admiraal, D.M.; Muste, M. Experimental Hydraulics: Methods, Instrumentation, Data Processing and Management – IAHR Monograph; CRC Press, Taylor & Francis Group, London UK, 2017.
Codice insegnamento B2379
Extended Reality for Digital Twin of Mechatronic Systems
2° anno · 2° semestre · 3 CFU · ING-IND/15 · 0 file
At the end of the integrated course, the student understands and applies the main techniques for modeling, simulating, and visualizing complex mechatronic systems through Digital Twins. The student is able to develop and…
Scheda dell'insegnamento
Obiettivi formativi
At the end of the integrated course, the student understands and applies the main techniques for modeling, simulating, and visualizing complex mechatronic systems through Digital Twins. The student is able to develop and represent 3D Digital Twins in Mixed Reality environments using appropriate software and hardware tools, and to implement simulations for multibody dynamics, virtual commissioning, and real-time data-driven system analysis. The student learns, through practice, the technologies to visualize the Digital Twin od a Mechatronic system in a Mixed Reality environment. The student makes practice on software and hardware tools for the creation or digitalization and the representation of a 3D Digital Twin of the system including virtual overlays.
Programma
Introduction to Digital Twin concepts and their evolution.
Applications of Digital Twins in mechatronic systems.
Introduction to Extended Reality (XR): technologies, devices, and development platforms.
Creation and management of Digital Twin virtual environments.
Import, management, and animation of CAD models and virtual overlays representing mechatronic systems.
Integration of simulated sensor data and real-time data visualization.
Modalità d'esame
The final assessment is based on the development, presentation, and discussion of a Digital Twin project.
Students, individually or in small groups, are required to design and implement a Digital Twin application for a mechanical or mechatronic system. The project shall demonstrate the integration of virtual models, simulated or real operational data, and XR-based visualization and interaction features.
The assessement is based on a pass/fail grade.
With regard to assessment of learning, the use of AI is prohibited. Any use of AI constitutes a violation of academic integrity.
Testi di riferimento
Lecture notes
Technical papers available for students
Teaching material will be available on Virtuale platform
Codice insegnamento B2414
Final Project (15 Cfu)
2° anno · 1° semestre · 15 CFU · 0 file
The students must be able to independently develop a research subject in one of the key areas characterising the study program, to prepare a written report and to defend it orally, demonstrating the achievement of the…
Scheda dell'insegnamento
Obiettivi formativi
The students must be able to independently develop a research subject in one of the key areas characterising the study program, to prepare a written report and to defend it orally, demonstrating the achievement of the course learning objectives. Students will also be able to interact with professionals with different academic and scientific background and to critically analyse results, according to the scientific research status as well.
Codice insegnamento B2415
Final Project (3 CFU)
2° anno · 1° semestre · 3 CFU · 0 file
The students must be able to independently develop a research subject in one of the key areas characterising the study program, to prepare a written report and to defend it orally, demonstrating the achievement of the…
Scheda dell'insegnamento
Obiettivi formativi
The students must be able to independently develop a research subject in one of the key areas characterising the study program, to prepare a written report and to defend it orally, demonstrating the achievement of the course learning objectives. Students will also be able to interact with professionals with different academic and scientific background and to critically analyse results, according to the scientific research status as well.
Codice insegnamento 90765
Final Project (9 Cfu)
2° anno · 1° semestre · 9 CFU · 0 file
The students must be able to independently develop a research subject in one of the key areas characterising the study program, to prepare a written report and to defend it orally, demonstrating the achievement of the…
Scheda dell'insegnamento
Obiettivi formativi
The students must be able to independently develop a research subject in one of the key areas characterising the study program, to prepare a written report and to defend it orally, demonstrating the achievement of the course learning objectives. Students will also be able to interact with professionals with different academic and scientific background and to critically analyse results, according to the scientific research status as well.
Codice insegnamento B2416
Heating, Refrigeration and Thermal Storage
2° anno · 2° semestre · 6 CFU · ING-IND/10 · 0 file
On completion of this course, the student will be able to describe in detail the components of heating, refrigeration, and thermal storage systems; know which traditional and new-generation heating, refrigeration and…
Scheda dell'insegnamento
Obiettivi formativi
On completion of this course, the student will be able to describe in detail the components of heating, refrigeration, and thermal storage systems; know which traditional and new-generation heating, refrigeration and thermal storage systems are suitable candidates for industrial, commercial, and residential applications; analyse in terms of Energy balances the heating, refrigeration and thermal storage system both in their components and as a whole; combine the exergetic and economic analysis for the purpose of Energy Audits, Diagnosis of Thermal System Operation or Design of Thermal Systems.
Programma
Heating systems and equipment:boilers for heating and domestic water valves, distribution systems, end elements. Energy and exergy analysis. Heat pumps. District heating and cogeneration. Refrigeration: vapour compression, absorption and adsorption systems and components. energy and exergy analysis. Thermal energy storage systems: sensible energy (hot water tanks, thermoactive enclosures, etc.), latent thermal energy (thermal energy storage materials), thermochemical energy (hints). Air conditioning equipment and exergy analysis. Ventilation systems with and without recuperators: energy and exergy analysis. Photovoltaic and thermal solar systems for civil applications. Thermoeconomic analysis. Physical and economic structure of an energy system. Products and Fuels. Incidence matrix. Exergy cost theory. Exergonomic cost of products and fuels. Exergy methodologies for the analysis of sustainability.
Modalità d'esame
Attendance of classes is strongly recommended in order to get firm understanding of the subject, yet it is neither compulsory nor significant in the determination of the final grade, as this is solely based on the candidates' performance during theexamination.
Assessment is individual and based oral examinations consisting of a numerical problem and two questions pertaining on the subjects discussed during the lectures. The only allowed material for the solution of the exercise is the pocket calculator; if tables are needed (e.g. thermodynamic tables), these are provided during the test.
If students have a decision from Bologna University entitling them to Targeted Study Support due to a documented disability, the examiner has the right to give such students an adapted examination or to examine them in a different manner.
Successful completion of the course entitles to a grade from 18 (Pass) to 30 with Merit (Distinction); corresponding grades (e.g. Distinction/Pass with some Distinction/Pass) for international students may be awarded upon request.
In accordance with the University Code of Ethics (Codice Etico di Ateneo), students’ attention is drawn to the obligation to adopt conduct based on the highest standards of integrity. Any activity that may compromise the proper conduct of examinations is prohibited, including but not limited to:
- cheating and plagiarism; • access to online learning resources; • use of artificial intelligence tools not expressly authorized; • use or possession of unauthorized materials or equipment.
It is specified that the mere possession of unauthorized tools or materials during the conduct of any examination results in the immediate invalidation of the submitted work and notification to the competent offices.
Any conduct in violation of the above provisions may result in disciplinary proceedings and, where criminal relevance applies, reports to the competent authorities, with the consequent risk of criminal proceedings being initiated against the students involved.
Testi di riferimento
Lecture notes, compendia and Handouts available on the Virtuale Platform; the notes correspond broadly to chapters 1, 5, 6 and 7 of the book "-Sala Lizarrga, Picallo-Lopez Exergy Analysis and Thermoeconomics of Buildings.", a copy of which is available in the student section of the Library located in Via Montaspro 97, Forlì. Suggested readings: - Bejan, Tsatsaronis, Moran - Thermal Design and Optimization - Blok, Nieuwlaar – Energy Analysis - Sala Lizarrga, Picallo-Lopez Exergy Analysis and Thermoeconomics of Buildings. - Andrews, Jelley, Energy Science.
Codice insegnamento B2399
Industrial Automation
2° anno · 2° semestre · 3 CFU · ING-INF/04 · 0 file
At the end of the integrated course, the student masters the conceptual and methodological tools for modeling, analyzing, and designing automatic control systems for industrial plants and processes, and acquires…
Scheda dell'insegnamento
Obiettivi formativi
At the end of the integrated course, the student masters the conceptual and methodological tools for modeling, analyzing, and designing automatic control systems for industrial plants and processes, and acquires practical skills in managing and optimizing physical and informational flows through flexible and sustainable automation solutions applied to manufacturing and service systems. This module aims to provide the conceptual, methodological, and practical bases that allow to analyze and design automatic control systems of industrial plants and processes. At the end of the course, the student is able to model, analyze and setup a controller for dynamic systems with discrete events, in the area of industrial automation. Finally, some significant cases of industrial processes and plants will be analyzed.
Programma
INTRODUCTION TO INDUSTRIAL AUTOMATION
From Industrial Revolution to Industry 4.0 Classification of plants, processes and control systems Types and main components of production lines Supervision, control, monitoring Production plants and their automation problems Computer Integrated Manufacturing (CIM) Pyramidal Model of a CIM system: field, control, supervision, planning and Management Field, procedural and coordination control
INDUSTRIAL AUTOMATION OF PRODUCTION LINES
Modelling of discrete event dynamical systems using Petri nets
Discrete event dynamical systems: definitions and properties Petri net modeling of discrete event systems: places, transitions, flow relationship between places and transitions, Petri Graph, marking function Evolution of Dynamic Petri nets: enabling and firing transitions, incidence matrix, occurrence vector, reachability analysis, graphical analysis of Petri nets Petri net simulators: WoPeD and PIPE 2.0 software Petri net modeling of industrial production systems: physical approach and functional approach
Examples of Models, Simulation and Control of production lines:
Model of the producer/consumer system Client/server system model with unit capacity or unlimited capacity request buffer
Model of a production line with 3 warehouses, three robots, one conveyor belt, two machine tools
Implementation and simulation in WoPeD and PIPE 2.0 of the systems referred to in points 1,2,3
Analysis and Control of Petri Graph and Application to Industrial Process Control
Analysis of industrial processes described with Petri nets: Liveliness, Limitedness, Reversibility, Shaft and graph of reachability and coverage, Reduction techniques, P-Invariants, T-Invariants, Siphons, Traps, Deadlock. Control and supervision of an production lines using Petri nets: control by invariants
Action Planner based on Petri Nets
Examples of DESIGN OF PRODUCTION LINE CONTROLLERS: Petri Net Control
Example: Handling system with self-driving vehicles
Notes on the translation of Petri nets in code
Modalità d'esame
Oral Colloquium. Optional project on a topic agreed with the student.
The oral colloquiom could be taken also on-line by TEAMS or ZOOM platform.
Testi di riferimento
Notes of the Teacher
KLS Sharma, Overview of Industrial Process Automation, second edition. Elsevier LtD, 2017
John O. Moody, Panos J. Antsaklis, Supervisory Control of Discrete Event Systems using Petri Nets, Editore: Kluwer Academic Publishers, ISBN: 0-7923-8199-8
Pedro Larrañaga et al, Industrial Applications of Machine Learning. Editore: Chapman & Hall/CRC Data Mining and Knowledge Series
Codice insegnamento 60351
Internship Abroad in Preparation for the Final Project (12 Cfu)
2° anno · 1° semestre · 12 CFU · 0 file
At the end of the internship abroad in preparation for the final project, the student acquires knowledge in a range of professional fields through participation in practical activities and experiences, either at external…
Scheda dell'insegnamento
Obiettivi formativi
At the end of the internship abroad in preparation for the final project, the student acquires knowledge in a range of professional fields through participation in practical activities and experiences, either at external structures or in university facilities, within the topic chosen for the final project. In addition, the student can interact with different professional figures and work in a team; he/she develops communication skills in a foreign language, shows independent judgment, knows how to interpret technical reports drafted by collaborators or supervisors, knows how to draw up reports on the activities carried out within the topic chosen for the final project.
Codice insegnamento B2421
Internship Abroad in Preparation for the Final Project (6 Cfu)
2° anno · 1° semestre · 6 CFU · 0 file
At the end of the internship abroad in preparation for the final project, the student acquires knowledge in a range of professional fields through participation in practical activities and experiences, either at external…
Scheda dell'insegnamento
Obiettivi formativi
At the end of the internship abroad in preparation for the final project, the student acquires knowledge in a range of professional fields through participation in practical activities and experiences, either at external structures or in university facilities, within the topic chosen for the final project. In addition, the student can interact with different professional figures and work in a team; he/she develops communication skills in a foreign language, shows independent judgment, knows how to interpret technical reports drafted by collaborators or supervisors, knows how to draw up reports on the activities carried out within the topic chosen for the final project.
Codice insegnamento B2418
Internship in Preparation for the Final Project (12 Cfu)
2° anno · 1° semestre · 12 CFU · 0 file
At the end of the internship in preparation for the final project, the student acquires knowledge in a range of professional fields through participation in practical activities and experiences, either at external…
Scheda dell'insegnamento
Obiettivi formativi
At the end of the internship in preparation for the final project, the student acquires knowledge in a range of professional fields through participation in practical activities and experiences, either at external structures or in university facilities, within the topic chosen for the final project. In addition, the student can interact with different professional figures and work in a team; he/she develops communication skills, shows independent judgment, knows how to interpret technical reports drafted by collaborators or supervisors, knows how to draw up reports on the activities carried out within the topic chosen for the final project.
Codice insegnamento B2422
Internship in Preparation for the Final Project (6 Cfu)
2° anno · 1° semestre · 6 CFU · 0 file
At the end of the internship in preparation for the final project, the student acquires knowledge in a range of professional fields through participation in practical activities and experiences, either at external…
Scheda dell'insegnamento
Obiettivi formativi
At the end of the internship in preparation for the final project, the student acquires knowledge in a range of professional fields through participation in practical activities and experiences, either at external structures or in university facilities, within the topic chosen for the final project. In addition, the student can interact with different professional figures and work in a team; he/she develops communication skills, shows independent judgment, knows how to interpret technical reports drafted by collaborators or supervisors, knows how to draw up reports on the activities carried out within the topic chosen for the final project.
Codice insegnamento B2643
Learning by Doing Internship
2° anno · 1° semestre · 6 CFU · 0 file
MECHANICS OF ROBOTS AND AUTOMATIC MACHINES (6 CFU)
2° anno · 1° semestre · 6 CFU · ING-IND/13 · 0 file
Students acquire the necessary tools to perform a functional analysis -aimed at designing purposes- of automatic machines and robots. In particular, students gain skills both from the theoretical viewpoint (kinematic,…
Scheda dell'insegnamento
Obiettivi formativi
Students acquire the necessary tools to perform a functional analysis -aimed at designing purposes- of automatic machines and robots. In particular, students gain skills both from the theoretical viewpoint (kinematic, static and dynamic analyses of complex mechanisms) and from the practical one (kinetostatic simulations of planar and spatial mechanisms by menas of multibody software).
Programma
INTRODUCTION TO AUTOMATION AND ROBOTICS. Introduction. Origins and state of the art. Classification of robots. Aim of industrial Robotics. Main issues of industrial robotics. Precision and calibration. STRUCTURE AND GENERAL CHARACTERISTIC OF ROBOTS. Introduction. Structure of industrial robots: arm and wrist of a manipulator. End effectors, actuators, sensors. Controller. Programming methods and languages. Main characteristics of industrial robots. Parallel kinematic machines (hints). COORDINATE TRANSFORMATION MATRICES. Introduction. Position and orientation of rigid bodies and reference systems. Matrices for the transformation of vector components and point coordinates. Rotations and translations. Homogeneous transformations. KINEMATICS OF MANIPULATORS. Introduction. Kinematic model of a manipulator. Denavit-Hartenberg parameters and homogeneous transformation matrices. Kinematic equations. Direct and inverse kinematic problem. Jacobian of a manipulator. Singularities. STATICS OF MANIPULATORS. Introduction. Analysis of forces and motion. Kinetostatic dualism. Force and moments balancing (hints). DYNAMICS OF MANIPULATORS. Introduction. Recall of rigid body dynamics. Equations of motion: Newton-Euler recursive algorithm (Cardinal Equations of Dynamics); Lagrange equations (energy-based approach). Direct and inverse dynamic problem. TRAJECTORY PLANNING. Introduction. Trajectory generation in Joint and Cartesian spaces. General criteria for working cycle optimization (hints). MANIPULATOR CONTROL. Introduction. Position/Velocity control. Force control (hints). Computed torque method. MULTIBODY SYSTEMS DYNAMICS. Introduction to multibody systems analysis. Introduction and getting started to the software MSC ADAMS; applications of kinematic and dynamic analyses of mechanisms. Optimization procedures (hints). [Practice lessons with the support of a software-house's expert.] PROBLEMS AND APPLICATIONS.
Inverse position analysis of the PUMA robot Dynamic model of a 2R planar mechanism Dynamic model of a 2R spatial mechanism Computer lab exercises using simulation software
Modalità d'esame
1.Project assignment: Students will present the solution of a practical problem that is assigned a few weeks before the conclusion of classroom lectures. The design problem to be solved deals with robot manipulators and/or robotic cells and -based on technical specifications related to robots' manipulation tasks- typically includes both theoretical analysis and numerical simulations/computations, e.g.: trajectory planning, layout optimization, selection of commercial robot, analysis of the performance required of a robot, modifying the model of a robotic cell unsuitable to perform a given task...
2. Oral exam: 1 or 2 theoretica questions about kinematic and/or static and/or dynamic analysis of serial robots.
The final score is computed by averaging the evaluations obtained for (1) the project presentation and (2) the oral interview.
Testi di riferimento
Reference book
Siciliano B., Sciavicco L., Villani L., Oriolo G., Robotics: Modelling, Planning and Control, Springer, 2009.
Suggested book
Siciliano & Khatib eds., Handbook of Robotics, Springer, New York, 2008
In-depth readings
Tsai L.W., Robot Analysis, The Mechanics of Serial and Parallel Manipulators, John Wiley & Sons, 1999. Angeles J., Fundamental of robotic mechanical systems, Springer-Verlag, New York, seconda edizione 2003 Sandler Ben-Zion, Robotics: Designing the Mechanisms for Automated Machinery, Academic Press, 1999
Codice insegnamento C8576
Manufacturing Technologies for Composite Materials
2° anno · 1° semestre · 6 CFU · ING-IND/16 · 0 file
The student will be introduced to differenttechnologies for the fabrication of components made of polymeric and composite materials with thermoplastic and thermosetting matrix, and will be able to select the most…
Scheda dell'insegnamento
Obiettivi formativi
The student will be introduced to differenttechnologies for the fabrication of components made of polymeric and composite materials with thermoplastic and thermosetting matrix, and will be able to select the most appropriate technology based on the required performance, the production footprint, and the number of components to be produced. The student will be able to understand and define manufacturing cycles to meet specific requirements on the final component, including those related to sustainability requirements.
Programma
METALS AND POLYMERS
-Metals and their proprieties
-Thermoplastic polymers
-Thermosetting polymersi
TECHNOLOGIES OF THERMOPLASTIC POLYMERS
Polymers, Press molding, injection molding, blow molding, stretch blow molding, thermoforming.
TECHNOLOGIES OF THERMOSETTING POLYMERS AND COMPOSITE MATERIALS
Properties of resins and fibers; classification of fabrics, properties of pre-pregs
Hand layup, Liquid Composite Molding (LCM), Resin transfer molding (RTM) and variants (VARTM, VARI, RIFT, etc), Autoclave and pre-pregs
Press Moulding: Compression moulding, Prepreg Compression Moulding, Sheet Moulding Compound (SMC)
Filament winding.
Modalità d'esame
Final test is realized in a written form, it consists in open questions on all the course topics. During the test, the use of any supporting material (such as textbooks, notes, computer supports, etc) is not allowed. Test is compsed by 4 questions to be discussed in open form, a score 0-4 is given to each answer thus realizing a final score on 32 basis. An optional oral session (based on student's request) can also be added, oral session can deal on all course topics and team-working study in order to clarify student's preparation and own contribute to the team working study.
At least, 5 evaluation session will be realized through the accademic year.
Tests list and results are managed through Almaesami website: https://almaesami.unibo.it/ It's mandatory to sign in on the website in order to attend the exam, the lists are closed 2 days before the exam.
In accordance with the University Code of Ethics (Codice Etico di Ateneo), students’ attention is drawn to the obligation to adopt conduct based on the highest standards of integrity. Any activity that may compromise the proper conduct of examinations is prohibited, including but not limited to:
- cheating and plagiarism; • access to online learning resources; • use of artificial intelligence tools not expressly authorized; • use or possession of unauthorized materials or equipment.
It is specified that the mere possession of unauthorized tools or materials during the conduct of any examination results in the immediate invalidation of the submitted work and notification to the competent offices.
disciplinary proceedings
reports to the competent authorities
criminal proceedings
Testi di riferimento
Crivelli Visconti I., Caprino G., Langella A., Materiali compositi, Casa editrice: Hoepli, ISBN: 8820341581
Lee Harper, Mike Clifford Design and Manufacture of Structural Composites, Elsevier, eBook ISBN: 9780128191613
F.C. Campbell, Structural Composite Materials, ASM International
Codice insegnamento B2390
Materials Chemistry
2° anno · 2° semestre · 6 CFU · CHIM/07 · 0 file
The course is focused on the applications of the principles of chemistry to the description of the behaviour of the solid state. At the end of the course the student will have the basis to understand the relationships…
Scheda dell'insegnamento
Obiettivi formativi
The course is focused on the applications of the principles of chemistry to the description of the behaviour of the solid state. At the end of the course the student will have the basis to understand the relationships between the nature and arrangements of the atoms, ions or molecules comprising a material and its overall bulk structural and physical properties. The acquired competences on advanced materials will be focused on aerospace structural design.
Programma
Solid State Chemistry:
Amorphous and Crystalline solids Bondings in solids Ionic, metallic, covalent and molecular solids The crystalline state: unit cells and crystal structures Relationships between chemical bonds, crystal structures and physical properties Imperfections in solids and their role in influencing properties Materials Characterization X-ray Diffraction Optical, electron, scanning probe microscopies IR and RAMAN spectroscopies Thermal analysis Analysis of Mechanical properties Polymeric materials Polymer classifications: polymers and biopolymers Polymer structures. Thermoplastics and thermosets Polymerization mechanisms Processing and additives Polymer end of life and sustainability Metals Phase diagrams Iron-carbon system and ferrous alloys Ceramics Structures and properties Composite materials Classifications and properties Fibers- reinforced composites Nanomaterials Definitions and structural characteristics Carbon nanotubes, fullerenes and graphene: characteristics and properties Nanoclays
Modalità d'esame
Learning outcomes are assessed through a final examination designed to verify the acquisition of the expected knowledge and skills. The examination consists of a 2-hour written test, to be completed without the use of notes, textbooks, electronic devices (e.g., smartphones or smartwatches), or any material other than that provided by the instructor. The use of basic calculators is permitted. The use of artificial intelligence (AI) tools is not allowed.
The use of AI, notes, textbooks, electronic devices, or any unauthorized material constitutes a violation of examination regulations and will result in the invalidity of the examination.
The written test consists of open-ended theoretical questions covering the topics addressed during the course. The examination is considered passed with a mark of 18/30 or higher.
Students will pass the examination if they demonstrate a sound understanding and operational competence with respect to the key concepts covered in the course and, in particular, achieve the following learning objectives:
Knowledge of the relationships between the structure of a material (polymer, ceramic, metal, composite, or nanocomposite) and its properties. Knowledge of the strategies that can be used to tailor and modulate material properties according to their intended applications.
Testi di riferimento
W.D. Callister J “Materials Science and Engineering”7th Edition Wiley (2007)
Codice insegnamento 73369
Mechanical Design with Advanced Materials
2° anno · 1° semestre · 6 CFU · ING-IND/14 · 0 file
At the end of the integrated course, the student possesses advanced knowledge of structural design methods for composite and additively manufactured components, including material characterization and optimization for…
Scheda dell'insegnamento
Obiettivi formativi
At the end of the integrated course, the student possesses advanced knowledge of structural design methods for composite and additively manufactured components, including material characterization and optimization for performance, cost, and sustainability. The student can apply the Finite Element Method, both theoretically and through commercial software, to analyze and design static and dynamic structural systems. The students acquire in-depth knowledge of the methods and instruments necessary for the optimal structural design of composite structures, particularly laminates and sandwiches, They learn the principles of the design for additive manufacturing, the mechanical properties of AM materials and the experimental methods for their determination. Optimal design criteria will be performance, cost and sustainability (reduction of the number of parts, lightweight design, and design for disassembly).
Programma
Module 1
Introduction to composite laminates
Mechanics of a single lamina.
Mechanics of laminates
Sandwich Structures
Joints
Applications
Module 2
Design and manufacturing cycle of components made using AM
Classification of additive processes
Constraints of additive design
Nesting and slicing
Lattice structures
Topological optimization and generative design
Modalità d'esame
Oral exam with questions on the topics covered in class, starting from the discussion of the exercises. Presentation of group projects and oral interview with questions on the topics covered in class. The exam method is designed to evaluate the knowledge and skills acquired and the methods of managing team work and of presenting the results.
Testi di riferimento
Gay, D. (2022). Composite Materials: Design and Applications (4th ed.). CRC Press. https://doi.org/10.1201/9781003195788
Jacob Aboudi, Steven Arnold, Brett Bednarcyk, (2021) Practical Micromechanics of Composite Materials, Butterworth-Heinemann, https://doi.org/10.1016/C2018-0-04016-5
Diegel, Olaf, Axel Nordin, and Damien Motte. A Practical Guide to Design for Additive Manufacturing. New York, NY, USA: Springer, 2020.
Lachmayer, Roland, Tobias Ehlers, and René Bastian Lippert. Design for Additive Manufacturing. Springer, 2024.
Stavropoulos, Panagiotis. Additive Manufacturing: Design, Processes and Applications. Springer Nature, 2023.
Codice insegnamento B2389
Mechanical Design with Advanced Materials (6 Cfu)
2° anno · 1° semestre · 6 CFU · ING-IND/14 · 0 file
The students acquire in-depth knowledge of the mathematical foundation of the Finite element Method. They are proficient in using a commercial FEM code to solve structural dynamic and static problems.
Scheda dell'insegnamento
Obiettivi formativi
The students acquire in-depth knowledge of the mathematical foundation of the Finite element Method. They are proficient in using a commercial FEM code to solve structural dynamic and static problems.
Programma
Module 1
Introduction to composite laminates
Mechanics of a single lamina.
Mechanics of laminates
Sandwich Structures
Joints
Applications
Module 2
Design and manufacturing cycle of components made using AM
Classification of additive processes
Constraints of additive design
Nesting and slicing
Lattice structures
Topological optimization and generative design
Modalità d'esame
Oral exam with questions on the topics covered in class, starting from the discussion of the exercises. Presentation of group projects and oral interview with questions on the topics covered in class. The exam method is designed to evaluate the knowledge and skills acquired and the methods of managing team work and of presenting the results.
Testi di riferimento
Gay, D. (2022). Composite Materials: Design and Applications (4th ed.). CRC Press. https://doi.org/10.1201/9781003195788
Jacob Aboudi, Steven Arnold, Brett Bednarcyk, (2021) Practical Micromechanics of Composite Materials, Butterworth-Heinemann, https://doi.org/10.1016/C2018-0-04016-5
Diegel, Olaf, Axel Nordin, and Damien Motte. A Practical Guide to Design for Additive Manufacturing. New York, NY, USA: Springer, 2020.
Lachmayer, Roland, Tobias Ehlers, and René Bastian Lippert. Design for Additive Manufacturing. Springer, 2024.
Stavropoulos, Panagiotis. Additive Manufacturing: Design, Processes and Applications. Springer Nature, 2023.
Codice insegnamento B2397
Modeling and Control of Sustainable Powertrains
2° anno · 2° semestre · 6 CFU · ING-IND/08 · 0 file
At the end of the course the student knows how to model sustainable powertrain systems, and how power can be controlled, to optimize efficiency and well-to-wheel emissions.
Scheda dell'insegnamento
Obiettivi formativi
At the end of the course the student knows how to model sustainable powertrain systems, and how power can be controlled, to optimize efficiency and well-to-wheel emissions.
Programma
The course is structured into four main blocks: modeling fundamentals, component modeling, control systems, and system-level modeling.
Fundamentals of Modeling and Control (15 hours)
1.1 Introduction to system modeling, simulation and signal processing
- Simulink environment:
- main blocks used in the course
- overview of Simulink libraries and toolboxes
- simulation settings and numerical aspects
- Modeling approaches:
- white-box, grey-box and black-box modeling
- data-driven models (including neural networks)
- differential equations and transfer function representation
1.2 Control systems: - system inputs/outputs and control structures
- closed-loop and feedforward control
- sampling and aliasing
- sensors and actuators
- PID control strategies
1.3 Signal processing: - analog filters (performance and design)
- digital filters (performance and implementation)
2. Vehicle and Component Modeling
2.1 Vehicle Modeling (5 hours) - Forces acting on the vehicle
- Powertrain-to-wheel transmission
- Longitudinal vehicle dynamics and equilibrium
- Tire modeling
2.2 Internal Combustion Engine Modeling (10 hours) - Cycle-resolved quantities and modeling strategies
- Cycle-to-cycle variability
- Knock modeling
- Airpath dynamics (filling and emptying models)
- Turbocharger modeling
- Port Fuel Injection (PFI) fuel dynamics
- Emissions modeling (black-box approaches)
- Oxygen storage modeling
- SCR system modeling
2.3 Battery Electric System Modeling (5 hours) - Battery modeling (cell and pack level)
- Electric motor and inverter modeling
2.4 Fuel Cell System Modeling (3 hours) - Fuel cell stack modeling
- Balance-of-plant modeling
2.5 Thermal and Cooling Systems (5 hours) - Hydraulic modeling of cooling systems
- Heat exchanger modeling (ε–NTU method and heat capacity)
- Coolant properties
3. Control of Powertrain Components
3.1 Internal Combustion Engine Control (10 hours) - Control-oriented modeling and actuation systems
- Torque control in SI and CI engines
- Hydrogen ICE control strategies (series hybrid configuration)
- Knock control
- Air–fuel ratio control
- SCR and DPF control strategies
3.2 Fuel Cell Control (2 hours) - Control architecture and state management
- Air path control
- Hydrogen supply control
- Thermal management (coolant path)
4. System-Level Modeling (5 hours) - Powertrain system modeling approaches
- Series hybrid powertrain configuration
- Hydrogen ICE-based systems
- Battery electric vehicle (BEV) modeling
Modalità d'esame
The assessment consists of a final oral examination.
The exam is based on two questions related to the modeling and control of powertrain systems using Simulink. Topics may include:
- vehicle models
- internal combustion engines
- battery electric powertrains
- fuel cell systems
- hybrid powertrains
As an alternative to one of the two questions, the student may present a project based on the development of a Simulink model. The project topic must be agreed upon with the instructor.
Each part (question or project) is graded up to 15 points, for a total maximum score of 30.
The assessment is designed to evaluate: - **Knowledge and understanding**: comprehension of modeling approaches and control architectures for sustainable powertrains
- **Applying knowledge**: ability to develop and analyze Simulink models of components and systems
- **Making judgements**: ability to critically evaluate modeling assumptions and control strategies
- **Communication skills**: ability to clearly present models, results, and design choices
During the exam, students are expected to: - explain model structure and underlying assumptions
- describe system behavior using simulation results
- discuss control strategies and their impact on system performance
The list of topics is provided through the course Moodle platform.
The use of artificial intelligence tools to answer exam questions is not permitted. During the written exam, students may only have a sheet of paper and a pen with them: the presence of any other device or tool, such as a mobile phone, tablet, or smartwatch, will result in the cancellation of the exam and postponement to the next exam session.
Testi di riferimento
Mandatory material
Lecture slides, notes, and supplementary materials are provided through the University e-learning platform (Moodle). These materials cover all course topics and are sufficient for exam preparation.
Lecture recordings are made available at the end of the course to support revision and self-study.
Reference books
- Robert Bosch, “Gasoline Engine Management”, Wiley
- Robert Bosch, “Diesel Engine Management”, Wiley
- L. Eriksson, L. Nielsen, “Modeling and Control of Engines and Drivelines”, Wiley
Additional references (for specific topics) - Srivastava, V. et al., “Control-Oriented Modeling and Analysis for Automotive Fuel Cell Systems”, Journal of Dynamic Systems, Measurement and Control, 2004, DOI: 10.1115/1.1648308
- Srivastava, V., Wendler, A., Schaub, J., Walters, M. et al., “Modular Fuel Cell Control Software for Commercial Vehicle Applications,” SAE Technical Paper 2024-26-0169, 2024, doi:10.4271/2024-26-0169
The above references may be used for in-depth study of specific topics such as fuel cell modeling and control.
Codice insegnamento B2398
Numerical Analysis
2° anno · 1° semestre · 6 CFU · MAT/08 · 0 file
The student learns the numerical methods for differential problems. At the end of the course the student knows the numerical-mathematical aspCFU and the main algorithmic methodologies that deal with the numerical…
Scheda dell'insegnamento
Obiettivi formativi
The student learns the numerical methods for differential problems. At the end of the course the student knows the numerical-mathematical aspCFU and the main algorithmic methodologies that deal with the numerical solution of differential problems of interest in Engineering.
Programma
Prerequisites:
General mathematical knowledge and computer skills from completed BSc study. More precisely, prerequisites of Geometry and Algebra, Mathematical Analysis and MATLAB programming are required. Moreover, a prior knowledge of fundamental concepts and basic topics of Numerical Analysis is also needed.
Program:
1. Iterative Methods for Solving Nonlinear Equations and Systems of Nonlinear Equations
Review of the main iterative methods for finding the roots of nonlinear equations in one variable: the bisection method, Newton's method, and the secant method. Iterative methods for the numerical solution of systems of nonlinear equations: Newton's method and quasi-Newton methods.
An application of nonlinear system solving in aerospace engineering.
2. Numerical Differentiation: Finite Difference Approximations of Derivatives
Numerical approximation of derivatives using finite difference formulas. The method of undetermined coefficients. Determination of the step size that minimizes the total approximation error.
Applications: solution of aerospace engineering problems using finite difference methods.
3. Numerical Integration Using Gaussian Quadrature
Brief overview of Newton-Cotes quadrature rules and their limitations. Open, closed, and semi-open Gaussian quadrature rules. Numerical algorithms for computing the nodes and weights of the Gauss-Legendre, Gauss-Lobatto, and Gauss-Radau quadrature rules.
An application of numerical integration in computational aerodynamics.
4. Numerical Methods for Ordinary Differential Equation Initial Value Problems (ODE-IVPs)
Ordinary differential equations (ODEs) and initial value problems (IVPs). Existence, uniqueness, and stability of solutions. One-step numerical methods for ODE-IVPs: explicit and implicit fixed-step Runge-Kutta methods, and adaptive Runge-Kutta methods. Accuracy, consistency, and stability of numerical methods. Stiff problems.
Application: simulation of the dynamic response of the Tacoma Narrows Bridge.
Modalità d'esame
The final examination is designed to assess the achievement of the following learning outcomes:
knowledge of the numerical and mathematical foundations, as well as the main algorithmic methodologies, for solving nonlinear equations and systems of nonlinear equations, for numerical differentiation and integration, and for solving initial value problems for ordinary differential equations;
the ability to design and implement numerical methods and MATLAB programs for the solution of engineering problems, and to critically evaluate their accuracy, efficiency, and reliability.
The examination will take place in the computer laboratory. Students will have 120 minutes to complete two exercises which require both the development of MATLAB code and written answers to theoretical questions covering the topics discussed during the lectures.
For assessment purposes, only the files uploaded to the Esami On Line (EOL) platform before the end of the examination will be considered.
During the examination, students are not permitted to consult textbooks, notes, or any computer-based support tools. Access to online course materials is also prohibited, as is the use of generative Artificial Intelligence (AI) tools.
The examination is considered passed if the student achieves at least 18 points out of a maximum of 32. A score above 30 results in the award of “30 cum laude”, in recognition of an outstanding level of achievement.
Instructions and deadlines for declining a grade will be provided by email upon publication of the examination results.
To participate in the exam the student must register (at least 2 days in advance) in the lists available on the AlmaEsami web platform. On the day of the exam the student will be able to access the laboratory and take the test only after showing an identification document.
The dates of the exams can be consulted on the AlmaEsami web platform and are visible several months in advance.
Clarifications on the recording of the exam grade for those who have the NUMERICAL ANALYSIS course (6 CFU) as a module of the integrated course of NUMERICAL AND MATHEMATICAL METHODS FOR ENGINEERING (12 CFU)
If the NUMERICAL ANALYSIS course (6 CFU) is one of the two modules that, together with MATHEMATICAL METHODS FOR ENGINEERING (6 CFU), constitutes the integrated course of NUMERICAL AND MATHEMATICAL METHODS FOR ENGINEERING (12 CFU), the grade that will be recorded will be calculated with the arithmetic average of the single grades that the student has obtained in the two modules. It should be noted that the result of the average will be rounded to the nearest integer. Only if the resulting average is exactly equidistant between two integers, the grade will be obtained by rounding up to the next highest integer. Moreover, in order to obtain the "30 cum laude" final evaluation, the student must be in one of the two following cases:
- receiving "30 cum laude" in both modules;
- obtaining "30 cum laude" in one module and 30 in the other one.
Lastly, it should be noted that the recording of the final evaluation requires the passing of both the exam of NUMERICAL ANALYSIS (6 CFU) and the exam of MATHEMATICAL METHODS FOR ENGINEERING (6 CFU) in a time interval not exceeding 12 months.
Students with special educational needs related to learning disorders and/or disabilities are invited to contact the responsible office (see https://site.unibo.it/studenti-con-disabilita-e-dsa/en) as soon as possible, so that they can propose suitable adaptations to be submitted to the lecturer at least 15 days before the exam date.
Testi di riferimento
For exam preparation, students may refer to the course materials uploaded on the Virtuale platform.
Recommended reference books for further reading are:
[1] T. Sauer: Numerical Analysis, 3rd ed., Pearson, 2018.
[2] J. Kiusalaas: Numerical Methods in Engineering with MATLAB, 3rd ed., Cambridge University Press, 2015.
[3] K. Atkinson, W. Han, D. Stewart: Numerical Solution of Ordinary Differential Equations, John Wiley and Sons, 2009.
[4] A. Quarteroni, R. Sacco, F. Saleri: Numerical Mathematics, 2nd ed., Springer, 2007.
[5] R.J. LeVeque: Finite Difference Methods for Ordinary and Partial Differential Equations, SIAM, 2007.
To fill any knowledge gaps related to the prerequisites of Numerical Analysis and/or to the fundamentals of MATLAB programming it is advisable to consult:
[1] E. E. Mikhailov: Programming with MATLAB for Scientists: A Beginner’s Introduction, CRC Press, Inc., 2017.
[2] A. Quarteroni, F. Saleri, P. Gervasio: Scientific Computing with MATLAB and Octave (4th edition), Springer, 2014.
[3] C. Moler: Numerical Computing with MATLAB, SIAM, 2004.
[4] J. Stoer, R. Bulirsch: Introduction to Numerical Analysis (3rd ed.), Springer, 2002.
Codice insegnamento 37261
Powertrain Testing
2° anno · 2° semestre · 3 CFU · ING-IND/08 · 0 file
At the end of the integrated course, the student understands the principles and methodologies for testing and analyzing sustainable powertrain systems, including test facilities, equipment, and data-driven modeling and…
Scheda dell'insegnamento
Obiettivi formativi
At the end of the integrated course, the student understands the principles and methodologies for testing and analyzing sustainable powertrain systems, including test facilities, equipment, and data-driven modeling and control, and is able to design and evaluate thermal management solutions for traditional and innovative mobility systems based on thermal requirements and performance criteria. At the end of this module the student learns the basics of sustainable powertrain testing, including test facilities and testing equipment characteristics, test procedures, data analysis, modeling and control based on test data.
Programma
sustainability in the industry
fundamental tools for testing
Experimental characterization of a battery pack
Modalità d'esame
Oral exam with questions on both classroom activities and laboratory activities.
Report of the laboratory activities
Codice insegnamento B2401
Powertrains for Sustainable Mobility
2° anno · 1° semestre · 6 CFU · ING-IND/08 · 0 file
At the end of the integrated course, the student can perform detailed energy and exergy analyses of thermodynamic and energy systems, including sustainable powertrains, evaluating losses, efficiencies, and…
Scheda dell'insegnamento
Obiettivi formativi
At the end of the integrated course, the student can perform detailed energy and exergy analyses of thermodynamic and energy systems, including sustainable powertrains, evaluating losses, efficiencies, and opportunities for improvement. The student can design heat exchanger networks, assess combustion and renewable energy technologies, and apply principles of minimal entropy generation and sustainability in energy conversion and system optimization. In this module the student learns the basics of sustainable powertrain technologies, from the use of natural resources down to energy conversion, including power and emissions control.
Programma
The course introduces the main powertrain architectures for sustainable mobility, with emphasis on energy conversion, efficiency, emissions, and system integration.
The content is organized into two modules.
Module 1 – Internal Combustion Engines and Sustainable Fuels
1.1 Fundamentals of Sustainable Mobility
Introduction to sustainable mobility Environmental impact of transport Life Cycle Assessment (LCA) 1.2 Sustainable Fuels Hydrogen as energy carrier Biofuels E-fuels
1.3 Internal Combustion Engines Fundamentals Efficiency and losses Torque generation Heat release and combustion metrics SI and CI combustion characteristics 1.4 Emissions and Aftertreatment Emissions in SI and CI engines Formation mechanisms Aftertreatment systems (ATS for SI and CI engines) 1.5 Advanced Combustion and Engine Technologies Supercharging and downsizing Variable compression ratio Advanced combustion concepts: Turbulent Jet Ignition (TJI) Spark Assisted Compression Ignition (SACI) 1.6. Internal Combustion Engines with Sustainable Fuels Hydrogen engines Integration of alternative fuels in conventional engines Module 2 – Electrified and Hybrid Powertrains 2.1 Introduction to Electric Mobility Historical overview of electric vehicles Performance metrics (range, charging time) Energy density (gravimetric and volumetric) Classification of electrified vehicles (BEV, PHEV, HEV, FCEV) 2.2 Battery Systems Battery architecture (cell, module, pack, system) Key performance indicators (SOC, SOH, C-rate) Battery management systems (BMS) Charging strategies and standards Safety aspects (thermal runaway) 2.3 Electric Powertrain Components Electric machines (DC, BLDC, induction, PMSM) Inverters and power electronics DC-DC converters 2.4 Fuel Cell Systems Fuel cell types and operating principles PEM fuel cell architecture Polarization phenomena and performance Balance of plant (BoP) Hydrogen storage and supply systems Air supply and thermal management 2.5 Hybrid Powertrains Hybrid architectures: series parallel power split Layout configurations (P0–P4) Operating modes: electric drive hybrid operation regenerative braking 2.6 Energy Management and Control Supervisory control strategies Energy flow optimization Regenerative braking control Power split control strategies
Particular emphasis is placed on comparing different powertrain solutions in terms of efficiency, emissions, and sustainability.
Modalità d'esame
The assessment consists of a final oral examination.
During the exam, students are asked four questions selected from the course topics, including:
- synthetic fuels and the role of internal combustion engines with sustainable fuels
- hydrogen internal combustion engines (H2-ICE)
- fuel cell powertrains
- battery electric vehicles (BEV)
- hybrid electric vehicles
- Life Cycle Assessment (LCA) and comparison of different powertrain solutions
Each question is graded up to 7.5 points, for a total maximum score of 30.
The assessment is designed to evaluate: - **Knowledge and understanding**: comprehension of different powertrain technologies and energy conversion processes
- **Applying knowledge**: ability to analyze the performance of different propulsion systems
- **Making judgements**: ability to compare powertrain architectures based on efficiency, emissions, and sustainability (including LCA)
- **Communication skills**: ability to clearly explain concepts and justify technical choices
During the exam, students are expected to: - describe the operating principles of different powertrain systems
- compare technologies in terms of performance and environmental impact
- discuss the role of different solutions in the transition toward sustainable mobility
The list of topics is provided through Virtuale, the course Moodle platform.
The use of artificial intelligence tools to answer exam questions is not permitted. During the written exam, students may only have a sheet of paper and a pen with them: the presence of any other device or tool, such as a mobile phone, tablet, or smartwatch, will result in the cancellation of the exam and postponement to the next exam session.
Testi di riferimento
Mandatory material: lecture slides, notes, and supplementary materials are provided through Virtuale, the University e-learning platform (Moodle).
These materials cover all course topics and are sufficient for exam preparation. Lecture recordings are made available at the end of the course to support revision and self-study.
Reference books:
Gasoline Engine Management - Robert Bosch - Wiley
Diesel Engine Management - Robert Bosch - Wiley
L. Eriksson, L. Nielsen; Modeling and Control of Engines and Drivelines; Wiley
B. Sunden, Hydrogen, Batteries and Fuel Cells; Elsevier
Hybrid and Electric Vehicles, CRC Press (Taylor&FRancis)
Codice insegnamento B2384
Powertrains for Sustainable Mobility (6 Cfu)
2° anno · 1° semestre · 6 CFU · ING-IND/08 · 0 file
At the end of the course the student knows the basics of sustainable powertrain technologies, from the use of natural resources down to energy conversion, including power and emissions control.
Scheda dell'insegnamento
Obiettivi formativi
At the end of the course the student knows the basics of sustainable powertrain technologies, from the use of natural resources down to energy conversion, including power and emissions control.
Programma
The course introduces the main powertrain architectures for sustainable mobility, with emphasis on energy conversion, efficiency, emissions, and system integration.
The content is organized into two modules.
Module 1 – Internal Combustion Engines and Sustainable Fuels
1.1 Fundamentals of Sustainable Mobility
Introduction to sustainable mobility Environmental impact of transport Life Cycle Assessment (LCA) 1.2 Sustainable Fuels Hydrogen as energy carrier Biofuels E-fuels
1.3 Internal Combustion Engines Fundamentals Efficiency and losses Torque generation Heat release and combustion metrics SI and CI combustion characteristics 1.4 Emissions and Aftertreatment Emissions in SI and CI engines Formation mechanisms Aftertreatment systems (ATS for SI and CI engines) 1.5 Advanced Combustion and Engine Technologies Supercharging and downsizing Variable compression ratio Advanced combustion concepts: Turbulent Jet Ignition (TJI) Spark Assisted Compression Ignition (SACI) 1.6. Internal Combustion Engines with Sustainable Fuels Hydrogen engines Integration of alternative fuels in conventional engines Module 2 – Electrified and Hybrid Powertrains 2.1 Introduction to Electric Mobility Historical overview of electric vehicles Performance metrics (range, charging time) Energy density (gravimetric and volumetric) Classification of electrified vehicles (BEV, PHEV, HEV, FCEV) 2.2 Battery Systems Battery architecture (cell, module, pack, system) Key performance indicators (SOC, SOH, C-rate) Battery management systems (BMS) Charging strategies and standards Safety aspects (thermal runaway) 2.3 Electric Powertrain Components Electric machines (DC, BLDC, induction, PMSM) Inverters and power electronics DC-DC converters 2.4 Fuel Cell Systems Fuel cell types and operating principles PEM fuel cell architecture Polarization phenomena and performance Balance of plant (BoP) Hydrogen storage and supply systems Air supply and thermal management 2.5 Hybrid Powertrains Hybrid architectures: series parallel power split Layout configurations (P0–P4) Operating modes: electric drive hybrid operation regenerative braking 2.6 Energy Management and Control Supervisory control strategies Energy flow optimization Regenerative braking control Power split control strategies
Particular emphasis is placed on comparing different powertrain solutions in terms of efficiency, emissions, and sustainability.
Modalità d'esame
The assessment consists of a final oral examination.
During the exam, students are asked four questions selected from the course topics, including:
- synthetic fuels and the role of internal combustion engines with sustainable fuels
- hydrogen internal combustion engines (H2-ICE)
- fuel cell powertrains
- battery electric vehicles (BEV)
- hybrid electric vehicles
- Life Cycle Assessment (LCA) and comparison of different powertrain solutions
Each question is graded up to 7.5 points, for a total maximum score of 30.
The assessment is designed to evaluate: - **Knowledge and understanding**: comprehension of different powertrain technologies and energy conversion processes
- **Applying knowledge**: ability to analyze the performance of different propulsion systems
- **Making judgements**: ability to compare powertrain architectures based on efficiency, emissions, and sustainability (including LCA)
- **Communication skills**: ability to clearly explain concepts and justify technical choices
During the exam, students are expected to: - describe the operating principles of different powertrain systems
- compare technologies in terms of performance and environmental impact
- discuss the role of different solutions in the transition toward sustainable mobility
The list of topics is provided through Virtuale, the course Moodle platform.
The use of artificial intelligence tools to answer exam questions is not permitted. During the written exam, students may only have a sheet of paper and a pen with them: the presence of any other device or tool, such as a mobile phone, tablet, or smartwatch, will result in the cancellation of the exam and postponement to the next exam session.
Testi di riferimento
Mandatory material: lecture slides, notes, and supplementary materials are provided through Virtuale, the University e-learning platform (Moodle).
These materials cover all course topics and are sufficient for exam preparation. Lecture recordings are made available at the end of the course to support revision and self-study.
Reference books:
Gasoline Engine Management - Robert Bosch - Wiley
Diesel Engine Management - Robert Bosch - Wiley
L. Eriksson, L. Nielsen; Modeling and Control of Engines and Drivelines; Wiley
B. Sunden, Hydrogen, Batteries and Fuel Cells; Elsevier
Hybrid and Electric Vehicles, CRC Press (Taylor&FRancis)
Codice insegnamento B2394
Predictive Maintenance
2° anno · 2° semestre · 3 CFU · ING-INF/04 · 0 file
At the end of the integrated course, the student masters the theoretical, methodological, and practical foundations of Condition Monitoring and Predictive Maintenance for industrial equipment. The student is able to…
Scheda dell'insegnamento
Obiettivi formativi
At the end of the integrated course, the student masters the theoretical, methodological, and practical foundations of Condition Monitoring and Predictive Maintenance for industrial equipment. The student is able to design and perform experimental vibration analyses, apply signal processing and numerical modeling techniques, and implement advanced Machine Learning–based diagnostic and predictive strategies for the dynamics and health assessment of mechanical systems. This module aims to provide the conceptual, methodological, and practical bases for the Predictive Maintenance of industrial equipment. At the end of the course, the student is able to apply the most advanced techniques based on Machine Learning and Neural Networks, characterizing Industry 4.0, of Condition Monitoring and Predictive Maintenance. Finally, significant cases related to industrial machines will be analyzed.
Programma
MACHINE LEARNING INDUSTRIAL AUTOMATION
Fundamentals of Machine Learning
Bagging, Boosting and Blended learning. Main algorithms such as Support Vector Machine, Random Forest, Naive Bayes and their application to learning procedure
Application of Machine Learning to Industrial Automation
Condition Monitoring (CM) and Predictive Maintenance (MP) within the Smart Factory
Sensorization to obtain Big Data of systems for the CM and MP: real-time measurement of mechanical, electronic, and electrical data, data on wear, overheating and consumption
Fault Detection and Isolation, Remaining Useful Life (RUL) prediction, Fault-tolerant Control: mitigation of fault effects
Matlab/Simulink Predictive Maintenance package illustration: programming, examples and synergistic use of the Matlab Machine Learning Toolbox
Application of Machine Learning techniques to the diagnosis of failures in ball bearings through the use of accelerometers (real data): vibration analysis, spectrum and envelope spectrum of vibrations increase of the signal-to-noise ratio by Kurtogram, Support Vector Machine based classification of the fault (inner and/or outer race fault). Programming in Matlab/Simulink
Application of Machine Learning Techniques to the diagnosis of faults and to the prediction of the remaining useful life of a Hydraulic Pump by means of pressure measurements (data from digital twin). Programming in Matlab/Simulink
DEEP LEARNING
Convolutional Neural Network Transfer Learning: use of Google Net and Squeezenet Condition Monitoring by Deep Learning Application to Rolling Element Bearing Fault Diagnosis
NEURAL NETWORK INTELLIGENT CONTROL
Neuro-Adaptive Control
Fundamentals of Neural Networks: Radial Basis Function Neural Networks Fundamentals of Error Learning Control Feedback Fundamentals of Sliding Mode Against
Machine Vision Applications to Industrial Systems
"Machine Vision" and "Imaging Transformations" "Multi Cameras-Based Visual Servoing for Industrial Robots" "Distributed Filtering for Sensorless Control"
Modalità d'esame
Oral Colloquium. Optional project on a topic agreed with the student.
The oral colloquiom could be taken also on-line by TEAMS or ZOOM platform.
Testi di riferimento
Pedro Larrañaga et al, Industrial Applications of Machine Learning. Editore: Chapman & Hall/CRC Data Mining and Knowledge Series
Codice insegnamento B2405
Preparation for the Final Project Abroad (12 Cfu)
2° anno · 1° semestre · 12 CFU · 0 file
Students interested in theses of larger complexity extend their basic knowledge through extensive literature research and the study of topics not explicitly addressed in courses that are part of their curriculum. The…
Scheda dell'insegnamento
Obiettivi formativi
Students interested in theses of larger complexity extend their basic knowledge through extensive literature research and the study of topics not explicitly addressed in courses that are part of their curriculum. The student, guided by a professor and included in a major project carried out abroad, collaborates with the structured staff for the preparation of the university final project.
Codice insegnamento B2420
Preparation for the Final Project Abroad (6 Cfu)
2° anno · 1° semestre · 6 CFU · 0 file
Students interested in theses of larger complexity extend their basic knowledge through extensive literature research and the study of topics not explicitly addressed in courses that are part of their curriculum. The…
Scheda dell'insegnamento
Obiettivi formativi
Students interested in theses of larger complexity extend their basic knowledge through extensive literature research and the study of topics not explicitly addressed in courses that are part of their curriculum. The student, guided by a professor and included in a major project carried out abroad, collaborates with the structured staff for the preparation of the university final project.
Codice insegnamento B2417
SUSTAINABLE PERFORMANCE AND INNOVATION MANAGEMENT
2° anno · 1° semestre · 6 CFU · ING-IND/35 · 0 file
This course equips students with the tools and frameworks to measure, manage, and improve sustainable performance in firms and industrial ecosystems. It covers metrics, assessment methods, and analytical approaches for…
Scheda dell'insegnamento
Obiettivi formativi
This course equips students with the tools and frameworks to measure, manage, and improve sustainable performance in firms and industrial ecosystems. It covers metrics, assessment methods, and analytical approaches for evaluating environmental and innovation outcomes. Students learn how sustainability-oriented innovations are designed, implemented, and governed in organisational contexts. The course integrates quantitative assessment, strategic management, and case-based analysis of real industrial transitions.By the end of the course students should: 1. Analyze and apply sustainability performance metrics to evaluate the environmental and economic impacts of engineering processes, products, and systems. 2. Design and justify measurement systems that integrate sustainability indicators and innovation performance in engineering decision-making. 3. Assess and manage sustainability-oriented innovation using frameworks for strategy, governance, and organizational capabilities. 4. Critically evaluate real industrial cases to identify drivers, barriers, and managerial implications for sustainable performance and innovation management.
Programma
The course equips students with concepts and analytical tools for understanding sustainability transitions applied to engineering problems. The course is structured around three main building blocks: (1) Sustainability transitions and sustainability-oriented innovations; (2) Measuring sustainable performance; and (3) Managing projects in industrial settings. It combines quantitative assessment, strategic and innovation management, and the analysis of engineering systems.
The first part of the course introduces sustainability, planetary boundaries, and the transition of industrial systems. Students examine socio-technical transitions, including transition pathways, technological niches, incumbent organizations, path dependency, and technological lock-in. The course then addresses sustainability-oriented innovation at process, product, and systemic levels. Particular attention is devoted to post-growth, sufficiency, selective downscaling, and rebound effects, as well as to sustainable and circular business models and their implications for value creation, delivery, and capture.
The second part focuses on sustainable performance measurement. It covers stakeholder analysis, materiality, sustainability strategy, strategy maps, and the design of integrated performance-measurement systems. Students learn to define environmental, economic, and innovation indicators, establish baselines and targets, assess data quality, assign measurement responsibilities, and recognize the possible behavioural effects of indicators. Screening life-cycle assessment, carbon measurement, and dashboard design are introduced as tools for supporting engineering and managerial decisions.
The third part addresses project management for sustainable innovation. Topics include project definition, scope, work-breakdown structures, scheduling, and resources allocation. Students also examine stakeholder engagement, technical and market uncertainty, risk and opportunity management, stage-gate decisions, benefits realization, and the development of transition and implementation roadmaps.
Throughout the course, students work in teams on a fictional company case grounded in a real industrial sustainability transition. The case integrates market, technological, environmental, financial, organizational, and project-management information. Students are required to assess alternative transition pathways, develop a sustainable business model and performance-measurement system, conduct a quantitative environmental and economic analysis, and prepare an implementation and governance plan.
Modalità d'esame
The final grade is based on:
an individual written examination based on open-ended questions, accounting for 50 per cent of the final grade; a team capstone project, accounting for 50 per cent of the final grade.
Assessment considers conceptual accuracy, appropriate use of academic evidence, transparency of assumptions, quantitative rigour, feasibility of the proposed recommendations, and clarity of written and oral communication.
Testi di riferimento
The course is based primarily on academic journal articles. Required readings will be made available to students through the course platform (Virtuale).
Codice insegnamento C9979
Structural Fem Modeling Applications
2° anno · 1° semestre · 6 CFU · ING-IND/14 · 0 file
At the end of the integrated course, the student possesses advanced knowledge of structural design methods for composite and additively manufactured components, including material characterization and optimization for…
Scheda dell'insegnamento
Obiettivi formativi
At the end of the integrated course, the student possesses advanced knowledge of structural design methods for composite and additively manufactured components, including material characterization and optimization for performance, cost, and sustainability. The student can apply the Finite Element Method, both theoretically and through commercial software, to analyze and design static and dynamic structural systems. The students acquire in-depth knowledge of the mathematical foundation of the Finite element Method. They are proficient in using commercial FEM code to solve structural dynamic and static problems.
Programma
The course provides students with the fundamental knowledge to perform structural analyzes using the finite element method, promoting an informed use of specific software for such analyses. The basic concepts of the finite element method, the different types of elements and their use in relation to the objectives of the analysis will be covered. A part of the course will be dedicated to the interpretation of the results and the validation of the developed models. - Applied knowledge and understanding: has in-depth knowledge of structural analysis methods and software used to examine the structural and production constraints of industrial products. Is able to apply the tools learned to obtain data useful for the project. - Autonomy of judgment: is capable of analyzing the results and validating the developed models.
Modalità d'esame
The assessment consists of an oral examination combined with the solution and discussion of a practical exercise using the FEM software adopted during the course.
The oral examination is aimed at assessing the student’s knowledge and understanding of the theoretical foundations of the Finite Element Method, including the main assumptions, modelling choices, types of finite elements, boundary conditions and interpretation of numerical results.
The practical exercise is aimed at assessing the student’s ability to apply the methods and tools presented during the course to the solution of structural static and/or dynamic problems using commercial FEM software. In particular, students are expected to define a suitable numerical model, select appropriate modelling assumptions, apply loads and constraints, run the analysis, and critically interpret and validate the obtained results.
Testi di riferimento
F. Cesari, "Introduzione al metodo degli elementi finiti"
F. Cesari, "Meccanica Delle Strutture. Metodo Degli Elementi Finiti"
G.Bhashyam, Ansys Mechanical - A Powerful Nonlinear Simulation Tool, Ansys Inc, Sep. 2012
Klaus-Jürgen Bathe, "Finite Element Procedures" 2014 http://web.mit.edu/kjb/www/Books/FEP_2nd_Edition_4th_Printing.pdf
Codice insegnamento B2388
Structural Fem Modeling Applications (6 Cfu)
2° anno · 1° semestre · 6 CFU · ING-IND/14 · 0 file
The students acquire in-depth knowledge of the mathematical foundation of the Finite element Method. They are proficient in using a commercial FEM code to solve structural dynamic and static problems.
Scheda dell'insegnamento
Obiettivi formativi
The students acquire in-depth knowledge of the mathematical foundation of the Finite element Method. They are proficient in using a commercial FEM code to solve structural dynamic and static problems.
Programma
The course provides students with the fundamental knowledge to perform structural analyzes using the finite element method, promoting an informed use of specific software for such analyses. The basic concepts of the finite element method, the different types of elements and their use in relation to the objectives of the analysis will be covered. A part of the course will be dedicated to the interpretation of the results and the validation of the developed models. - Applied knowledge and understanding: has in-depth knowledge of structural analysis methods and software used to examine the structural and production constraints of industrial products. Is able to apply the tools learned to obtain data useful for the project. - Autonomy of judgment: is capable of analyzing the results and validating the developed models.
Modalità d'esame
The assessment consists of an oral examination combined with the solution and discussion of a practical exercise using the FEM software adopted during the course.
The oral examination is aimed at assessing the student’s knowledge and understanding of the theoretical foundations of the Finite Element Method, including the main assumptions, modelling choices, types of finite elements, boundary conditions and interpretation of numerical results.
The practical exercise is aimed at assessing the student’s ability to apply the methods and tools presented during the course to the solution of structural static and/or dynamic problems using commercial FEM software. In particular, students are expected to define a suitable numerical model, select appropriate modelling assumptions, apply loads and constraints, run the analysis, and critically interpret and validate the obtained results.
Testi di riferimento
F. Cesari, "Introduzione al metodo degli elementi finiti"
F. Cesari, "Meccanica Delle Strutture. Metodo Degli Elementi Finiti"
G.Bhashyam, Ansys Mechanical - A Powerful Nonlinear Simulation Tool, Ansys Inc, Sep. 2012
Klaus-Jürgen Bathe, "Finite Element Procedures" 2014 http://web.mit.edu/kjb/www/Books/FEP_2nd_Edition_4th_Printing.pdf
Codice insegnamento B2396
Sustainable Design of Industrial Plants
2° anno · 1° semestre · 6 CFU · ING-IND/17 · 0 file
Knowledge and comprehension of the course contents in relation to the sustainable design of production systems. The course allows the student to comprehend theoretical principles, functional schemes and methodologies for…
Scheda dell'insegnamento
Obiettivi formativi
Knowledge and comprehension of the course contents in relation to the sustainable design of production systems. The course allows the student to comprehend theoretical principles, functional schemes and methodologies for measuring, designing and control the sustainability in industrial plant. Skills and capabilities in the application of the previously mentioned contents will be discussed in relation to real industrial cases where operators and machines cooperate. The student learns the tools and methods for the evaluation/measurement of the industrial sustainability in terms of social, environmental and economic impact.
Programma
Introduction to the concepts of environmental, social and economic sustainability and their relevance in the industrial context. Analysis of enabling technologies and the general framework of sustainability in industry with particular attention to climate change and resource management. Analysis of national, European and international contexts to better understand the challenges and opportunities related to sustainability. Identification and analysis of the impacts of industrial activities on the environment. Use and definition of economic, environmental and social performance indicators (KPIs). The importance of standardization and specificity in measuring and monitoring sustainability. In-depth study of methodologies such as Life Cycle Assessment (LCA) and Material Flow Analysis (MFA) through practical exercises and case studies. Reduction of environmental impacts through operational improvements, efficiency of structures and eco-design of industrial plants. Mapping of corporate energy flows and evaluation of environmental impacts linked to energy consumption. Evaluation of the sustainability of plants for the production of energy from renewable sources. Energy efficiency and electrification of industrial plants. Corporate waste management with focus on prevention, recycling and disposal. Methods for the valorization of waste into by-products and treatment techniques such as compaction and anaerobic digestion. Strategies to minimize waste generated by production processes and improve sustainability. Analysis of impacts and logistics and transport for corporate sustainability. Modes of transport and greenhouse gas emissions. Performance indicators and emissions per tonne transported. Impact of packaging on logistics operations. Practical exercises on measuring sustainability and formulating transition proposals.
Modalità d'esame
The exam includes a written test consisting of two theory questions and an exercise, for a total duration of approximately 1.5 hours. The learning assessment checks the quality of the achievement of the training objectives of the course with particular regard to: 1. Knowledge of the criteria for the sustainable design of industrial plants. 2. Knowledge of the criteria for reducing environmental and social impacts in the management of industrial plants. 3. Knowledge of methods to guide a company on a transition path towards environmental and social sustainability. The learning assessment consists of a written exam lasting 90 minutes which includes: - two open-ended questions in which the student is asked to explain concepts, demonstrations and functional principles of the sustainable design of industrial plants. - a numerical exercise for which the use of a calculator is required. The grade is expressed in thirtieths: the minimum grade is 18/30, the maximum grade is 30/30 with honours. The minimum grade for passing the exam is assigned if knowledge of all the topics being tested is verified and there are no serious gaps. The maximum scores assigned to each question and exercise are equally balanced. The test calendar is made available well in advance on the AlmaEsami web platform of the University of Bologna. Students who intend to take the test must first register on the list of the chosen exam and must show an identification document on the day of the exam. After the correction, at the discretion of the teacher, an oral study will be possible.
Testi di riferimento
Lecture notes on my personal website.
Codice insegnamento B2386
Sustainable Industrial Logistics
2° anno · 2° semestre · 3 CFU · ING-IND/17 · 0 file
At the end of the integrated course, the student masters the conceptual and methodological tools for modeling, analyzing, and designing automatic control systems for industrial plants and processes, and acquires…
Scheda dell'insegnamento
Obiettivi formativi
At the end of the integrated course, the student masters the conceptual and methodological tools for modeling, analyzing, and designing automatic control systems for industrial plants and processes, and acquires practical skills in managing and optimizing physical and informational flows through flexible and sustainable automation solutions applied to manufacturing and service systems. Through the direct and experimental application, both physical and simulative, of the design and control of physical and information flows, the student learns tools and methods for both the manufacturing and service industry management with a particular focus for an efficient and sustainable resource utilization. The student also knows the application of flexible automation concepts leading to effective supply chain management.
Programma
The course is oriented towards the design of logistics and production systems. The course is intended to train students in the detailed skills of generating and executing simulation models of production processes.
The teaching is aimed at full understanding and use of the AutomodTM application in order to develop the main manufacturing and process production aspects in an appropriate dynamic simulation environment, including
Conveyor systems; Material handling systems; Flexible Manufacturing Systems; Flexible Assembly lines; Manual and automatic storage systems; Supply chain and logistics systems.
At the end of the course the students will be able to:
Understand the basic concepts underlying the simulation of production processes; Know the scope and potential of simulation as a support tool for the design of production processes; Develop the simulation environment for complex production systems; Produce and interpret simulation reports; Perform and analyze What-If analyses.
The entire course is based on AutomodTM, an object-oriented software developed to provide an environment for building highly accurate models for analysis and development.
Modalità d'esame
Testi di riferimento
Codice insegnamento B2410
Sustainable Industry Laboratory (I.C.)
2° anno · 2° semestre · 0 file
At the end of the integrated course, the student masters the conceptual and methodological tools for modeling, analyzing, and designing automatic control systems for industrial plants and processes, and acquires…
Scheda dell'insegnamento
Obiettivi formativi
At the end of the integrated course, the student masters the conceptual and methodological tools for modeling, analyzing, and designing automatic control systems for industrial plants and processes, and acquires practical skills in managing and optimizing physical and informational flows through flexible and sustainable automation solutions applied to manufacturing and service systems. This module aims to provide the conceptual, methodological, and practical bases that allow to analyze and design automatic control systems of industrial plants and processes. At the end of the course, the student is able to model, analyze and setup a controller for dynamic systems with discrete events, in the area of industrial automation. Finally, some significant cases of industrial processes and plants will be analyzed.
Programma
INTRODUZIONE ALL'AUTOMAZIONE INDUSTRIALE
Dalla rivoluzione industriale ad Industry 4.0 Classificazione di impianti, processi e sistemi di controllo Tipologie e componenti principali delle linee di produzione Supervisione, controllo, monitoraggio Impianti di produzione e loro problematiche di automazione Computer Integrated Manufactoring (CIM) Modello piramidale di un sistema CIM: Campo, Macchina, Cella, Stabilimento, Azienda Controllo di campo, controllo di procedure, controllo di coordinamento.
AUTOMAZIONE INDUSTRIALE DI CATENE DI MONTAGGIO
Modellizzazione di sistemi dinamici ad eventi discreti mediante Reti di Petri
Sistemi dinamici ad eventi discreti: definizioni e proprietà Modellizzazione con reti di Petri di sistemi ad eventi discreti: posti, transizioni, relazione di flusso tra posti e transizioni, grafo di Petri, funzione di marcatura Evoluzione delle Reti di Petri Dinamiche: abilitazione e firing delle transizioni, matrice di incidenza, vettore delle occorrenze, analisi di raggiungibilità, analisi grafica delle reti di petri Simulatori di Reti di Petri: software WoPeD e PIPE 2.0 Modellistica con Reti di Petri di sistemi di produzione industriale: approccio fisico ed approccio funzionale
Esempi di Modelli, Simulazione e Controllo di processi produttivi:
Modello del sistema produttore/consumatore Modello del sistema client/server con buffer delle richieste a capacità unitaria o con capacità illimitata Modello di un processo di produzione con 3 magazzini, tre robot, un nastro trasportatore, due macchine utensili Implementazione e simulazione in WoPeD e PIPE 2.0 dei sistemi di cui ai punti 1,2,3
Analisi e Controllo di Reti di Petri ed Applicazione al Controllo dei Processi Industriali
Analisi processi industriali descritti con reti di Petri: Vivezza, limitatezza, reversibilità, Albero e grafo di raggiungibilità e di copertura, Tecniche di riduzione, P-Invarianti, T-Invarianti, Sifoni, Trappole, Deadlock. Controllo e supervisione di un processo industriale mediante Reti di Petri: controllo mediante invarianti
Pianificatore di Azioni basato su Reti di Petri Esempi di Controllo mediante Reti di Petri.
sistema di movimentazione con veicoli autoguidati
Cenni alla traduzione di Reti di Petri in codice
Modalità d'esame
Colloquio orale con lo studente. Eventuale tesina facoltativa su argomento concordato con lo studente.
Il colloquio orale può avvenire anche on-line su piattaforma TEAMS o ZOOM
Testi di riferimento
Dispense del Docente C. Bonivento, L. Gentili, A. Paoli, Sistemi di automazione industriale, Editore: McGraw-Hill, Anno edizione: 2011, ISBN: 88-386-6693-3 P. Chiacchio, F. Basile, Tecnologie informatiche per l'automazione, Editore: McGraw-Hill, Anno edizione: 2004, ISBN: 88-386-6147-2
Luca Ferrarini, Automazione Industriale: Controllo Logico con Reti di Petri, Editore: Pitagora Editrice, Anno edizione: 2001, ISBN: 88-371-1296-3
Luca Ferrarini, Luigi Piroddi, Esercizi di Controllo Logico con Reti di Petri, Editore: Pitagora Editrice, Anno edizione: 2002, ISBN: 88-371-1340-4
Codice insegnamento B2409
Sustainable Mobility Laboratory (I.C.)
2° anno · 2° semestre · 0 file
At the end of the integrated course, the student understands the principles and methodologies for testing and analyzing sustainable powertrain systems, including test facilities, equipment, and data-driven modeling and…
Scheda dell'insegnamento
Obiettivi formativi
At the end of the integrated course, the student understands the principles and methodologies for testing and analyzing sustainable powertrain systems, including test facilities, equipment, and data-driven modeling and control, and is able to design and evaluate thermal management solutions for traditional and innovative mobility systems based on thermal requirements and performance criteria. At the end of this module the student learns the basics of sustainable powertrain testing, including test facilities and testing equipment characteristics, test procedures, data analysis, modeling and control based on test data.
Programma
sustainability in the industry
fundamental tools for testing
Experimental characterization of a battery pack
Modalità d'esame
Oral exam with questions on both classroom activities and laboratory activities.
Report of the laboratory activities
Codice insegnamento B2400
Sustainable Use of Energy (I.C.)
2° anno · 1° semestre · 0 file
At the end of the integrated course, the student can perform detailed energy and exergy analyses of thermodynamic and energy systems, including sustainable powertrains, evaluating losses, efficiencies, and…
Scheda dell'insegnamento
Obiettivi formativi
At the end of the integrated course, the student can perform detailed energy and exergy analyses of thermodynamic and energy systems, including sustainable powertrains, evaluating losses, efficiencies, and opportunities for improvement. The student can design heat exchanger networks, assess combustion and renewable energy technologies, and apply principles of minimal entropy generation and sustainability in energy conversion and system optimization. In this module the student learns the basics of sustainable powertrain technologies, from the use of natural resources down to energy conversion, including power and emissions control.
Programma
Il corso introduce le principali architetture di sistemi di propulsione per la mobilità sostenibile, con particolare attenzione alla conversione dell’energia, all’efficienza, alle emissioni e all’integrazione di sistema.
Il programma è organizzato in due moduli.
Introduzione alla mobilità sostenibile Impatto ambientale dei trasporti Life Cycle Assessment (LCA)
Idrogeno come vettore energetico Biocombustibili E-fuels
Efficienza e perdite Generazione della coppia Rilascio di calore e grandezze caratteristiche della combustione Caratteristiche della combustione nei motori ad accensione comandata e ad accensione per compressione
Emissioni nei motori ad accensione comandata e ad accensione per compressione Meccanismi di formazione degli inquinanti Sistemi di post-trattamento dei gas di scarico per motori SI e CI
Sovralimentazione e downsizing Rapporto di compressione variabile Concetti avanzati di combustione: Turbulent Jet Ignition (TJI) Spark Assisted Compression Ignition (SACI)
Motori a idrogeno Integrazione di combustibili alternativi nei motori convenzionali
Cenni storici sui veicoli elettrici Indicatori di prestazione: autonomia e tempo di ricarica Densità energetica gravimetrica e volumetrica Classificazione dei veicoli elettrificati: BEV, PHEV, HEV, FCEV
Architettura della batteria: cella, modulo, pacco batteria, sistema Principali indicatori di prestazione: SOC, SOH, C-rate Sistemi di gestione della batteria, Battery Management System (BMS) Strategie e standard di ricarica Aspetti di sicurezza, inclusa la fuga termica
Macchine elettriche: DC, BLDC, a induzione, PMSM Inverter ed elettronica di potenza Convertitori DC-DC
Tipologie di celle a combustibile e principi di funzionamento Architettura delle celle a combustibile PEM Fenomeni di polarizzazione e prestazioni Balance of Plant (BoP) Sistemi di accumulo e alimentazione dell’idrogeno Alimentazione dell’aria e gestione termica
Architetture ibride: serie parallelo power split Configurazioni di layout: P0–P4 Modalità operative: trazione elettrica funzionamento ibrido frenata rigenerativa
Strategie di controllo supervisivo Ottimizzazione dei flussi energetici Controllo della frenata rigenerativa Strategie di controllo del power split
Particolare enfasi è posta sul confronto tra diverse soluzioni di powertrain in termini di efficienza, emissioni e sostenibilità.
Modalità d'esame
La verifica dell’apprendimento consiste in un esame orale finale.
Durante l’esame, agli studenti vengono poste quattro domande selezionate tra gli argomenti del corso, tra cui:
combustibili sintetici e ruolo dei motori a combustione interna alimentati con combustibili sostenibili motori a combustione interna a idrogeno, H2-ICE powertrain a celle a combustibile veicoli elettrici a batteria, BEV veicoli elettrici ibridi Life Cycle Assessment (LCA) e confronto tra diverse soluzioni di powertrain
Ciascuna domanda è valutata fino a 7,5 punti, per un punteggio massimo complessivo di 30.
La valutazione è finalizzata a verificare:
Conoscenza e comprensione: comprensione delle diverse tecnologie di powertrain e dei processi di conversione dell’energia Capacità di applicare conoscenza: capacità di analizzare le prestazioni di diversi sistemi di propulsione Autonomia di giudizio: capacità di confrontare architetture di powertrain sulla base di efficienza, emissioni e sostenibilità, inclusa l’analisi LCA Abilità comunicative: capacità di spiegare chiaramente i concetti e di giustificare le scelte tecniche
Durante l’esame, gli studenti dovranno:
descrivere i principi di funzionamento dei diversi sistemi di propulsione confrontare le tecnologie in termini di prestazioni e impatto ambientale discutere il ruolo delle diverse soluzioni nella transizione verso la mobilità sostenibile
L’elenco degli argomenti è fornito tramite Virtuale, la piattaforma Moodle del corso.
Durante lo svolgimento della prova scritta lo studente potrà tenere con sè solo foglio e penna: la presenza di qualsiasi altro strumento (cellulare, tablet, smartwatch) comporterà l'annullamento dell'esame ed il rinvio all'appello successivo. Nel caso sia impossibile effettuare l'esame in presenza, l'esame sarà svolto oralmente via Teams o Zoom.
Testi di riferimento
Materiale obbligatorio: le slide delle lezioni, gli appunti e i materiali supplementari sono forniti tramite Virtuale, la piattaforma e-learning dell’Università (Moodle).
Questi materiali coprono tutti gli argomenti del corso e sono sufficienti per la preparazione dell’esame.
Le registrazioni delle lezioni saranno rese disponibili al termine del corso per supportare il ripasso e lo studio individuale.
Robert Bosch, Gasoline Engine Management, Wiley Robert Bosch, Diesel Engine Management, Wiley L. Eriksson, L. Nielsen, Modeling and Control of Engines and Drivelines, Wiley B. Sunden, Hydrogen, Batteries and Fuel Cells, Elsevier Hybrid and Electric Vehicles, CRC Press, Taylor & Francis
Codice insegnamento B2383
Theory of Systems and Controls for Automation
2° anno · 2° semestre · 6 CFU · ING-INF/04 · 0 file
At the end of the course the student handles Linear Time-Invariant systems and their representation through Laplace transform and inverse transform and transfer functions, the basic principles of linear-system…
Scheda dell'insegnamento
Obiettivi formativi
At the end of the course the student handles Linear Time-Invariant systems and their representation through Laplace transform and inverse transform and transfer functions, the basic principles of linear-system stability and the response modes (1st and 2nd order elementary systems and their composition to implemented higher-order systems). Students know how to use Bode and Nyquist diagrams and root locus to describe structural properties of linear systems, and how to design controllers for linear systems, lead and lag networks, PID controllers, cascade controllers. Nonlinear system control, with linearization-based control will also be introduced.
Programma
Introduction to Control Systems. Examples of control systems. Definition of system: control and disturbance inputs, outputs, state variables. Principles of control systems design. Mathematical Models of Systems. Differential equation models of physical systems; Linear approximations of nonlinear models. Modeling principles: Electric systems; Mechanical systems; Flow systems. Input-Output Models. Laplace transform. Transfer functions. Forced and free response. Block diagrams. Signal-flow graphs. Examples. State Variable Models. State-space models. Realization from differential equation models: Canonical forms. Solution of the state equation. Relation with input-output models. Stability of Systems. Definitions. External stability (BIBO stability). Routh-Hurwitz criterion. Stability of state-space models: Internal stability and external stability. Transient and steady-state response. Feedback Systems. Introduction. Error-signal Analysis. Sensitivity Analysis. Test input signals. Time-response of first- and second-order systems. Higher-order models. Transient response. Performance specification in time-domain and relation with pole location. Steady-state error of feedback control systems. Design examples. Root Locus. Definition and procedure. Parameter design via the root locus method. Introduction to PID controllers. Anti-windup control. Design examples. Design using computer software. Frequency Response Methods. Frequency response. Polar plots and Bode plots. Performance specifications in the frequency domain. Design Examples. Feedback Control Systems Design. Cascade compensators. Phase-lead compensator networks: Frequency domain and root-locus design methods. Phase-lag design: Frequency domain and root-locus design methods. Lead-lag controllers. Pre-filters. Design examples. Design Using State-Space Methods. Controllability and observability. Full-state feedback design. State-observer design. Output-feedback design using state-observers. Internal model design. Design examples.
Modalità d'esame
Comprehensive written and oral exam.
The assessment of the student’s proficiency consists of an individual final written examination followed by an individual oral examination. There are no intermediate examinations.
The written examination is comprehensive and is intended to assess the student’s ability to analyze and design linear control systems using the methods presented in the course. It may include theoretical questions, numerical exercises, and design problems. Typically, students may be asked to:
Derive mathematical models of physical systems using differential equations. Obtain linear approximations of nonlinear models around an equilibrium condition. Derive state-space and input-output representations of dynamical systems. Compute system responses in the time domain using Laplace-transform methods and partial-fraction expansions. Analyze the internal and external stability of a system. Apply the Routh–Hurwitz criterion. Analyze feedback systems in terms of transient response, steady-state error, sensitivity, and disturbance rejection. Determine the principal time-domain and frequency-domain performance indices. Construct and interpret root loci, Bode diagrams, and polar plots. Design PID controllers and phase-lead, phase-lag, or lead-lag compensators. Select controller parameters to meet prescribed stability and performance requirements. Interpret or complete block diagrams and relate input-output models to state-space representations.
The oral examination is based partly on the student’s written work and partly on the general course content. During the first part of the oral examination, the student may be asked to explain, justify, correct, or further develop the solutions presented in the written examination. The purpose of this discussion is to verify the student’s understanding of the methods used and to distinguish conceptual understanding from the mere application of standard procedures. The written examination and the corresponding portion of the oral examination are evaluated jointly and carry a maximum score of 30/30.
The oral examination also includes at least one additional question on a topic that was not covered in the written examination. This question is intended to verify the breadth of the student’s preparation and the ability to establish connections among different parts of the course. The additional oral question carries a maximum weight of 10/30, which is added to the score obtained in the first part of the examination.
In the students's evaluation, particular emphasis is placed on the correctness of the methodology, the clarity and rigor of the reasoning, the ability to interpret the results from a control-systems perspective, and the appropriate use of mathematical notation and technical terminology. This latter point is not negotiable: Points will be taken out for sloppiness and/or carelessness.
Class participation is considered very important for understanding the course material, although attendance does not directly contribute to the final grade.
Testi di riferimento
Main Textbook: Modern Control Systems, R. Dorf and R. Bishop, Prentice Hall, Global Edition, 2021. Auxiliary Textbook: Control Systems: An Introduction, H. Khalil, Michigan Publishing, 2023. Note: this textbook is freely available in electronic form at https://control.eecs.umich.edu Copies of the slides used in the lectures will be made available to the students. These are by no means to be considered exhaustive to achieve proficiency in the subject matter of the course.
Codice insegnamento B2378
Thermal Control
2° anno · 2° semestre · 3 CFU · ING-IND/10 · 0 file
At the end of the integrated course, the student understands the principles and methodologies for testing and analyzing sustainable powertrain systems, including test facilities, equipment, and data-driven modeling and…
Scheda dell'insegnamento
Obiettivi formativi
At the end of the integrated course, the student understands the principles and methodologies for testing and analyzing sustainable powertrain systems, including test facilities, equipment, and data-driven modeling and control, and is able to design and evaluate thermal management solutions for traditional and innovative mobility systems based on thermal requirements and performance criteria. Upon completion of the Lab the student will be able to know the systems, both traditional and new, which are used for thermal control of mobility related systems; calculate the thermal requirements for automotive thermal control devices; choose and design a suitable solution for thermal control problems arising in automotive applications.
Programma
Classroom activities: basics of temperature measurements. Infrared thermography: basics and intermediate notions. Basics of thermal system modelling.
Laboratory activities: infrared measurements and data acquisition/processing. Use of simulation tools (software) to assess the performance of thermal systems and automotive applications.
Modalità d'esame
Assessment is individual and based on the de visu discussion of a personal report describing activities carried out in the lab.
Successful completion of the course entitles to the statement of 'Pass'.
In accordance with the University Code of Ethics (Codice Etico di Ateneo), students’ attention is drawn to the obligation to adopt conduct based on the highest standards of integrity. Any activity that may compromise the proper conduct of examinations is prohibited, including but not limited to:
- cheating and plagiarism; • access to online learning resources; • use of artificial intelligence tools not expressly authorized; • use or possession of unauthorized materials or equipment.
It is specified that the mere possession of unauthorized tools or materials during the conduct of any examination results in the immediate invalidation of the submitted work and notification to the competent offices.
Any conduct in violation of the above provisions may result in disciplinary proceedings and, where criminal relevance applies, reports to the competent authorities, with the consequent risk of criminal proceedings being initiated against the students involved.
Testi di riferimento
All material used for the lectures and lab activity will be made available on the website https://virtuale.unibo.it
Codice insegnamento B2402
VIBRATION MEASUREMENTS AND ANALYSIS
2° anno · 2° semestre · 3 CFU · IIND-02/A · 0 file
Vibration Analysis
2° anno · 2° semestre · 3 CFU · ING-IND/13 · 0 file
At the end of the integrated course, the student masters the theoretical, methodological, and practical foundations of Condition Monitoring and Predictive Maintenance for industrial equipment. The student is able to…
Scheda dell'insegnamento
Obiettivi formativi
At the end of the integrated course, the student masters the theoretical, methodological, and practical foundations of Condition Monitoring and Predictive Maintenance for industrial equipment. The student is able to design and perform experimental vibration analyses, apply signal processing and numerical modeling techniques, and implement advanced Machine Learning–based diagnostic and predictive strategies for the dynamics and health assessment of mechanical systems. At the end of this module the student is able to arrange and conduct experimental tests to detect mechanical vibrations of mechanisms and machines, with different devices and transducers. The student knows numerical modelling methods and tools to analyze the dynamics of complex mechanical systems, including elastodynamic phenomena. The student gains knowledge about the main signal processing and analysis techniques for vibration response characterization and diagnostics of mechanical systems, enabling Condition Monitoring and Predictive Maintenance strategies.
Programma
Detection of vibration signals through accelerometers Sensor setup and acquisition parameters Detection of stationary signals from gears and unbalanced rotors Acquisition of nonstationary signals Analysis of signals from accelerometers Time domain and frequency domain analysis of stationary signals Time-frequency analysis of nonstationary signals Other advanced analysis techniques Detection and analysis of signals from other transducers Laser tachometers and vibrometers Piezoelectric force sensors Microphones Dynamic and elastodynamic modelling Rigid and flexible multibody simulations Dynamic substructuring Experimental Modal Analysis Impact test Modal shaker excitation
Modalità d'esame
In order to pass the final exam, students must work on a team assignment (2/3 people) structured as follows:
Practical test in the laboratory: arranging the setup of sensors and acquisition system, and performing measurements of vibration signals Processing and analyzing the recorded signals, to identify the phenomena of interest Writing a report/presentation on the performed activity and presenting the work in an oral session
The first practical test can be taken on the final day of the course. Then, it will be possible to make the measurements on the official exam dates. It is not possible to carry out the practical part and the oral presentation on the same exam date, since the oral presentation is based on the analysis of the signals measured in the practical test.
Students not attending at least 75 % of the practical activities in the lab must take an additional written test.
In accordance with the University Code of Ethics, students are required to adhere to the highest standards of integrity. Any activity aimed at improperly altering the outcome of examinations (e.g., cheating, plagiarism, accessing online course materials, or using unauthorized AI tools) is strictly prohibited. In particular, mere possession of unauthorized materials or devices during the examination will result in the immediate invalidation of the test and reporting to the appropriate authorities. Any conduct in violation of these rules may lead to disciplinary proceedings or, where applicable, referral to the competent authorities if criminally relevant; in such cases, the students involved may be subject to legal prosecution.
Testi di riferimento
The slides and lecture notes shown during the course will be made available for download.
Suggested books (not mandatory):
Rao S.S., “Mechanical vibrations”, Third edition, Addison Wesley Pub. Company, 1995. Inman D.J., “Engineering Vibration”, Prentice Hall, 1994.
Scientific papers for in depth study of specific topics.
Codice insegnamento B2404
Virtual Prototyping
2° anno · 2° semestre · 3 CFU · ING-IND/15 · 0 file
At the end of the integrated course, the student understands the architecture and design principles of automatic machines and is able to perform their conceptual and embodiment design. The student also acquires skills in…
Scheda dell'insegnamento
Obiettivi formativi
At the end of the integrated course, the student understands the architecture and design principles of automatic machines and is able to perform their conceptual and embodiment design. The student also acquires skills in immersive and semi-immersive visualization, animation, and interaction with mechanical systems through XR technologies, applying software and hardware tools for virtual prototyping and design evaluation. The student learns the basic functions for the digital representation and animation of industrial systems and for the interaction with virtual scenarios through XR (Extended Reality) technologies. Moreover, the student makes practice on software and hardware tools for advanced virtual prototyping.
Programma
Introduction to Extended Reality (XR): operating principles, technologies, and industrial applications.
Virtual prototyping techniques and the creation of virtual environments.
Design and development of interactive immersive environments.
Modalità d'esame
Submission of intermediate individual assignments.
Submission of a final group project.
Presentation and discussion of the final project.
The assessment is graded on a pass/fail basis.
With regard to assessment of learning, the use of AI is prohibited. Any use of AI constitutes a violation of academic integrity.
Testi di riferimento
Lecture notes
Technical papers available for students
Teaching material will be available on Virtuale platform
Codice insegnamento B2408
Virtualization of Mechatronic Systems
2° anno · 2° semestre · 3 CFU · ING-IND/13 · 0 file
At the end of the integrated course, the student understands and applies the main techniques for modeling, simulating, and visualizing complex mechatronic systems through Digital Twins. The student is able to develop and…
Scheda dell'insegnamento
Obiettivi formativi
At the end of the integrated course, the student understands and applies the main techniques for modeling, simulating, and visualizing complex mechatronic systems through Digital Twins. The student is able to develop and represent 3D Digital Twins in Mixed Reality environments using appropriate software and hardware tools, and to implement simulations for multibody dynamics, virtual commissioning, and real-time data-driven system analysis. The students learn the main approaches and techniques to model complex mechatronic systems. The development of the Digital Twins of robots and automatic machines will be taught through the practical use of alternative software tools available at the computer lab. Different kinds of Digital Twins are developed according to the scope of their simulations, in particular dealing with Multibody systems dynamics, Virtual Commissioning, and real-time simulations of physical prototypes fed by measured data.
Programma
Introduction to the basic concepts of: modelling, simulation and co-simulations of mechatronic systems; data-driven and model-based monitoring of machinery; Digital Twin. Kinematic, static, dynamic, and elastodynamic modelling/simulations of mechanisms and machines. CAE tools for machine design optimization.
Modalità d'esame
Delivery of assignments/projects, consisting of the development and simulations in the presented software of virtual models of (simple) sub-units of automatic machines/mechatronic systems.
Testi di riferimento
Slides will be uploaded on the Unibo platform Virtuale.
Codice insegnamento B2412
Advanced Design Methods (I.C.) - Not available for the year 2025/2026
1° semestre · 0 file
Advanced and Sustainable Manufacturing - Not available for the year 2025/2026
1° semestre · 6 CFU · ING-IND/16 · 0 file
Condition Monitoring and Predictive Maintenance Laboratory (I.C.) - Not available for the year 2025/2026
2° semestre · 0 file
Design and Virtual Prototyping of Automatic Machines Laboratory (I.C.) - Not available for the year 2025/2026
2° semestre · 0 file
Digital Engineering Laboratory (I.C.) - Not available for the year 2025/2026
2° semestre · 0 file
Electric Drives
1° semestre · 6 CFU · ING-IND/32 · 0 file
Electric Drives (6 Cfu) - Not available for the year 2025/2026
1° semestre · 6 CFU · ING-IND/32 · 0 file
Engineering and Technology of Control Systems
1° semestre · 6 CFU · ING-INF/04 · 0 file
Engineering and Technology of Control Systems (6 Cfu) - Not available for the year 2025/2026
1° semestre · 6 CFU · ING-INF/04 · 0 file
Exergy and Pinch Point Analysis for Sustainable Energy Use (6 Cfu) - Not available for the year 2025/2026
1° semestre · 6 CFU · ING-IND/10 · 0 file
Final Project (15 Cfu) - Not available for the year 2025/2026
1° semestre · 15 CFU · 0 file
Final Project (3 CFU) - Not available for the year 2025/2026
1° semestre · 3 CFU · 0 file
Final Project (9 Cfu) - Not available for the year 2025/2026
1° semestre · 9 CFU · 0 file
Heating, Refrigeration and Thermal Storage - Not available for the year 2025/2026
2° semestre · 6 CFU · ING-IND/10 · 0 file
Internship Abroad in Preparation for the Final Project (12 Cfu) - Not available for the year 2025/2026
1° semestre · 12 CFU · 0 file
Internship Abroad in Preparation for the Final Project (6 Cfu) - Not available for the year 2025/2026
1° semestre · 6 CFU · 0 file
Internship in Preparation for the Final Project (12 Cfu) - Not available for the year 2025/2026
1° semestre · 12 CFU · 0 file
Internship in Preparation for the Final Project (6 Cfu) - Not available for the year 2025/2026
1° semestre · 6 CFU · 0 file
Learning by Doing Internship - Not available for the year 2025/2026
1° semestre · 6 CFU · 0 file
Manufacturing Technologies for Composite Materials - Not available for the year 2025/2026
1° semestre · 6 CFU · ING-IND/16 · 0 file
Mechanical Design with Advanced Materials (6 Cfu) - Not available for the year 2025/2026
1° semestre · 6 CFU · ING-IND/14 · 0 file
Mechanics of Robots and Automatic Machines - Not available for the year 2025/2026
1° semestre · 6 CFU · ING-IND/13 · 0 file
Modeling and Control of Sustainable Powertrains - Not available for the year 2025/2026
2° semestre · 6 CFU · ING-IND/08 · 0 file
Powertrains for Sustainable Mobility (6 Cfu) - Not available for the year 2025/2026
1° semestre · 6 CFU · ING-IND/08 · 0 file
Preparation for the Final Project Abroad (12 Cfu) - Not available for the year 2025/2026
1° semestre · 12 CFU · 0 file
Preparation for the Final Project Abroad (6 Cfu) - Not available for the year 2025/2026
1° semestre · 6 CFU · 0 file
Structural Fem Modeling Applications (6 Cfu) - Not available for the year 2025/2026
1° semestre · 6 CFU · ING-IND/14 · 0 file
Sustainable Design of Industrial Plants - Not available for the year 2025/2026
1° semestre · 6 CFU · ING-IND/17 · 0 file
Sustainable Industry Laboratory (I.C.) - Not available for the year 2025/2026
2° semestre · 0 file
Sustainable Mobility Laboratory (I.C.) - Not available for the year 2025/2026
2° semestre · 0 file
Sustainable Use of Energy (I.C.) - Not available for the year 2025/2026
1° semestre · 0 file
Technologies and Controls for Industrial Automation (I.C.) - Not available for the year 2025/2026
1° semestre · 0 file